stuck at checksum

[shida2000]

i tried to flash several imgs with sunray flashup, but once i load the img get stuck at check sum.
already used sunray flashup once and all went well. I used null cable and usb service cable, like the first time. any idea?
thanks in advance

[laaziri1963]

Re: stuck at checksum

download this tuto in pdf

__http://www.gulfup.com/?4HKDs8

[foxy6800]

Re: stuck at checksum

Is you box a clone, or original?
What image/images are you trying to load?
I have had a similar experience when tried to load a image to clone box for a friend.
I am sure other members with more dreambox knowledge will be able to help better!!
Just an idea, try and load the last working image and see what happens!!

[shida2000]

Re: stuck at checksum

hello,
i have a clone DM sunray 800se. sim 210 fitted with ramiMAHER-sim2 (image release SVN(110r0)23/07/2012, second stage 84-r0.

I tried TSimage3OE2-d DM800se sim 2.ssl84D.....then nemesis 2.6 DM800SE SVN 190Ro-Ramimaher...none off them work. or better they get stuck at checksum

I will give a try with the original img
EDIT...TRIED BUT SAME PROBLEM

[kalpikos]

Re: stuck at checksum

Hello shida2000

Have you ever tried to flash successfully you receiver with this version of sunray flashup?
If you never flashed again your box, just try to use other version of sunray flashup.

Use an image that you know for sure that works well with your box.
Also, you can try and recover any bad sectors in extras when you are running sunray flashup.

[shida2000]

Re: stuck at checksum

yes i did. Im afraid i mess up with img i flashed. But strange enough i just re-flashed the same. And i cant open webinterface. IP should be ok, if i open dreambox control center i can get connected.
Today i tried with Optiflasher, i can get connected, but when i try to type Ip in check box...say timeout

[duhoki]

Re: stuck at checksum

Shida, Go in to setup-->plugin-->WEBIF--> and check if it is enabled and on what port.

[foxy6800]

Re: stuck at checksum

Make sure the cable that you are using is OK
I have seen threads that people had issues and found out it was the cable that was faulty
try using another cable and see what happens!!
Best of luck

[kalpikos]

Re: stuck at checksum

Do you use the right drivers for the usb service cable?
Did you noticed if windows has created successfully a virtual Com Port connection?

Change the com port in sunray flashup if it's necessary and try again.

Btw, what do you want to do with DCC?
Connect your box with both usb service cable and the ftp cable and then try flash it with an image which works for you.

[shida2000]

Re: stuck at checksum

Phew! i managed to flash a different img with Optiflasher via serial cable only. Box is responding well now...
Thank you all