Friends i am facing image flashing problem on my dreambox 800 hd se sunray. During flashing with dreamup image there is response there is data lost and too much load on partitions.. Pls help. I have used the image so many times before which i am going to install image has no problem..
Alert: Don't Use Hotmail Email Accounts for registration
Collapse
Before Access to all Forums and Trial accounts you must need to activate your account Email address
Image flashing problem.. Pls help
Collapse
X
-
Re: Image flashing problem.. Pls help
Hi mate
You can try the following:
-connect your box with your pc via usb and also connect the ethernet cable from your router.
-Use the dreamup and tick "Use Network". Also choose correct Serial Port.
-You have to choose "recover bad sectors" in the "Extras" menu in Dreamup
-Press the "Connect" button in Dreamup
-Start your box and wait a few seconds
If all works well you should see the IP adress of the box in the LCD
-Don't push the flash button
-Launch your preferred browser and type in the IP of the Dreambox
- Run the firmware-upgrade via your browser.
If you still can't flash your box,
I suggest you to use some special Dreambox-Sunray Repair Tool.If You Like My Post..... Please Press the Thanks ButtonComment
-
Re: Image flashing problem.. Pls help
in such a problem use web page of the device or use rs 232 cable u r problem will solvedComment
Comment