Ccam and mgcamd problem

[kalpikos]

Re: Ccam and mgcamd problem

default are auto detect so that shouldn't be a problem

I've noticed that sometime this value can cause problem even if it is in auto detect B: { 00 } because it detects a wrong type of receiver or just auto-detect not work.

It's better to be changed the value by yourself depending on your receiver in order to avoid any problem.

In the case of our friend and because he is using a dm800se it's better to set: B: { 06 }

[vimmers]

Re: Ccam and mgcamd problem

Some time, problems are coming due to wrong type of receiver in mg_cfg.

default are auto detect so that shouldn't be a problem

[kalpikos]

Re: Ccam and mgcamd problem

If you still have problem with mgcamd I suggest you to change some value in mg_cfg.
Read the infos in original mg_cfg that is given for each value and make some tests in order to have better results.
Some time, problems are coming due to wrong type of receiver in mg_cfg.

[peremacedonia]

Re: Ccam and mgcamd problem

try mgcamd 1.35 or change image with cccam,mgcamd configurated

[tech1010]

Re: Ccam and mgcamd problem

try this
M: { 01 }
C: { 01 }
A: { 02 }
U: { 01 }
T: { 00 }
G: { 33 }
N: { 07 }
K: { 05 }
Q: { 600 }
P: { 02 }
O: { 00 } username password
S: { 03 } 80
L: { 03 }
E: { 15 }
H: { 07 }
R: { 00 }
D: { 00 }
B: { 00 }
F: { 01 }
G: { 33 }
P: { 02 }
and cccam 2.1.1 or lower

thanks for guiding sir.. Am using cccam 2.3.0 and mgcmd 1.38. Actually cccam is all time ok only mgcmd is in problem..

[peremacedonia]

Re: Ccam and mgcamd problem

try this
M: { 01 }
C: { 01 }
A: { 02 }
U: { 01 }
T: { 00 }
G: { 33 }
N: { 07 }
K: { 05 }
Q: { 600 }
P: { 02 }
O: { 00 } username password
S: { 03 } 80
L: { 03 }
E: { 15 }
H: { 07 }
R: { 00 }
D: { 00 }
B: { 00 }
F: { 01 }
G: { 33 }
P: { 02 }
and cccam 2.1.1 or lower

[tech1010]

Re: Ccam and mgcamd problem

What is your configuratoin on mgcamd?

Possible options  B: { ХХ } from 00 to 12
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox E1
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips  / GI/Xtrend ET600
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox , IPbox Enigma2
# 12 stapi/openbox Sxx, IPbox DGS, Skyway & others

this is 06

[peremacedonia]

Re: Ccam and mgcamd problem

What is your configuratoin on mgcamd?

Possible options  B: { ХХ } from 00 to 12
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox E1
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips  / GI/Xtrend ET600
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox , IPbox Enigma2
# 12 stapi/openbox Sxx, IPbox DGS, Skyway & others

[aplok]

Re: Ccam and mgcamd problem

mgcam use the priority list for fast switching beetwen channel.

... so if this prior file is messy ...

... better to check it , or
to bypass it

[Clark197]

Re: Ccam and mgcamd problem

but sir i need mgcmd because dish tv 95. Deg needs replace.list to open all channels thats why i use cline in mgcmd and cline in cccam opens only conax channels so its compulsion to use mgcmd. Moreover i have tried various images like gp3. Ts1.1. Ozon. Merlin etc. But problem is same on all..

Presently there is no priority list in usr/keys. Well what is its utility..

mgcam use the priority list for fast switching beetwen channel.

[tech1010]

Re: Ccam and mgcamd problem

@tech1010

As I said you some posts above, don't use mgcamd for a c-line.
Use a version of cccam that works well with your box and put your line in the cccam.cfg.

I have noticed that some c-lines work very slow when they are using with mgcamd. I don't know why this happens but Im sure that the problem is comming from the server , not from you.
Also, you can try other image and other version of mgcamd.

but sir i need mgcmd because dish tv 95. Deg needs replace.list to open all channels thats why i use cline in mgcmd and cline in cccam opens only conax channels so its compulsion to use mgcmd. Moreover i have tried various images like gp3. Ts1.1. Ozon. Merlin etc. But problem is same on all..

Presently there is no priority list in usr/keys. Well what is its utility..

[kalpikos]

Re: Ccam and mgcamd problem

@tech1010

As I said you some posts above, don't use mgcamd for a c-line.
Use a version of cccam that works well with your box and put your line in the cccam.cfg.

I have noticed that some c-lines work very slow when they are using with mgcamd. I don't know why this happens but Im sure that the problem is comming from the server , not from you.
Also, you can try other image and other version of mgcamd.

[KVF1966]

Re: Ccam and mgcamd problem

delay switching channels may be connected with the fact that it is different channels TV providers

[jsalerman]

Re: Ccam and mgcamd problem

All Channels are DOWN, all day..
So, Any Problem?

[bokkie]

Re: Ccam and mgcamd problem

Have you got a priority.list set up in mgcamd?