audio problem

[valrug]

lately I often do not feel that the audio and I have to restart the decoder. may depend on what? it happened to any of you?
dm800 hd clone pvr
nemesis 2.6

[kalpikos]

Re: audio problem

Hi mate

If the problem can be fixed only with restarting your box, then I think it's a hardware problem.
Are you sure that the cables are ok?

[kostis]

Re: audio problem

is this for all channels?

[valrug]

Re: audio problem

is for all channels
the problem is not resolved by restarting only enigma

[skytec]

Re: audio problem

Try to check the audio cables, audio settings in your reciver. If that does not work then reload firmware again.

[herrr]

Re: audio problem

I think it's must be some problem in wiring...but perhaps it's because I used to be for 30 years in radio broadcasting business and I see this problem everywhere
Anyway I need to know exactly what's the problem, perhaps there is some language misunderstanding...what does it mean "I often do not feel that the audio" ?
What does audio exactly? It disappeared, there are noises?

[pan1300]

Re: audio problem

hi

agree with the above: check your audio settings and audio cable - do you use a separate audio cable (most common red/black) or hdmi or scart? try with another method/cable. or digital optical cable (red light)?

[kalpikos]

Re: audio problem

is for all channels
the problem is not resolved by restarting only enigma

Maybe you have some conflict in your image and is better to use an other.
You can try to flash your box with other image.

[cgac99]

Re: audio problem

There's information missing.
How's connected the Receiver, Scart , HDMI, sound is on RCA's ?
If it's Scart, then sometimes a wire is not connected inside the Scart and may even make a short circuit.
HDMI, it shoud work there's not much space for find an error.
RCA, maybe a wire who make a short circuit somewhere, sometimes a wire behind a sofa or the cat who scratch it on the wall...can be many resasons.

If all wires are ok, then , if a after a reload of the image not work, i guess that it is an internal hardware problem.

Good luck

[sossenheim-ffm]

Re: audio problem

My friend did have the same problem.
His scart cable was broken.
2 Pins were missing, he bought a new cable and everything did work fine again.
Look at your scart cable and check the pins.

Hope I could help