DM 500-s. (Network Setup is not Ok )

[olsir]

Hi there,

I have problem with my DM-500s Clone. Im trying to configure my comunication seting but when I test it, it says "Network setup is not ok"



DM is connected with modem, becouse when i go to Adons to download something, it work. Also Clines are pretested in another Box.


Thank you,

[duhoki]

Re: DM 500-s. (Network Setup is not Ok )

Have you tryed to set static ip? You sure it is not just a bug so that you do have internet but bug say network not ok.

[olsir]

Re: DM 500-s. (Network Setup is not Ok )

Yes I did with Static Ip. But is still same.

[igius12]

Re: DM 500-s. (Network Setup is not Ok )

your ip of dreambox must be the the same ip of pc only the last 3 digits to change

[kostis]

Re: DM 500-s. (Network Setup is not Ok )

enter on your router settings by typing the ip on the the internet address bar and have a look on the device that are using your internet connection. can you see your dreambox there? also one friend used to have problem with the firewall after installing a new antivirus.

[olsir]

Re: DM 500-s. (Network Setup is not Ok )

enter on your router settings by typing the ip on the the internet address bar and have a look on the device that are using your internet connection. can you see your dreambox there? also one friend used to have problem with the firewall after installing a new antivirus.

Yes I did that. Also it's working with DCC, or Dreambox Edit and other software for Dreambox. Also I have disable the Roter Firewall. That's why im so confused and have no idea where is the problem.

[gianni253]

Re: DM 500-s. (Network Setup is not Ok )

Yes I did that. Also it's working with DCC, or Dreambox Edit and other software for Dreambox. Also I have disable the Roter Firewall. That's why im so confused and have no idea where is the problem.

Troubleshooting steps for these situations:
- from a command prompt of your pc, telnet to the receiver
- login
- from the command shell of busybox try to nslookup _w_w_w_.******.com
- from the command shell of busybox try to ping _w_w_w_.******.com
- from the command shell of busybox try to traceroute _w_w_w_.******.com

With these simple steps you will be able to determine if the problem is due to:
- lan network connection
- dns
- routing

Report here and ... have a Merry Christmas !!!

[ljuben]

Re: DM 500-s. (Network Setup is not Ok )

I have the same (identical) problem but I don't care - works all fine, it's working with DCC, ,Dreambox Edit and other software for Dreambox, emu works fine, cs works fine - So why worry ?
Merry Christmas to all .

[skytec]

Re: DM 500-s. (Network Setup is not Ok )

Hi there,

I have problem with my DM-500s Clone. Im trying to configure my comunication seting but when I test it, it says "Network setup is not ok"


DM is connected with modem, becouse when i go to Adons to download something, it work. Also Clines are pretested in another Box.


Thank you,

Your Network Setup is OK.
You do not have to worry about it.

[olcayw]

Re: DM 500-s. (Network Setup is not Ok )

you can reserve ip on modem first and then set DHCP and else to auto on box.

[kalpikos]

Re: DM 500-s. (Network Setup is not Ok )

Hi my friend

I think you have IP conflict.
You can try to set another IP.

Finally you can use dhcp in order to see what IP your box gets,
and then to set the same IP manualy in your settings.

[buiacco]

Re: DM 500-s. (Network Setup is not Ok )

Sorry olsir,
I don't uderstand if your box answer to your ping.
In addition I'd like to know if subnet mask fit with the IP address assigned.
I look forward to receiving further information.
Have a nice day

[kostis]

Re: DM 500-s. (Network Setup is not Ok )

just had the same problem today after removing the rj45 cable from one dm7000 to put it on another dm500. i run some test with on the dm500 that had the same problem with the picture number1. after i reconnect it on the dm7000 the network was ok! tha make me think you case so i put again the dm500 and the problem was still there. dm7000 still working good. i will try later dm500 and i will reset the router to see if it works. what i forgot to say is that the dm500 was working ok before i got the dm7000 and replace it so i think the network may lock somehow on a receiver and causing troubles.

[thews34]

Re: DM 500-s. (Network Setup is not Ok )

Hi

I have a dm600 and occasionally I have to untick (disable the dhcp) on the box. then run the box again before re-activating the dchp. This resets the IP address and runs ok. The submask should be the same as your pc and if you run dchp it should be automatic.
Have you tried using an ftp with your ipaddress to connect ?

If you are using windows tick your windows connections to automatically obtain an ip address.

[kostis]

Re: DM 500-s. (Network Setup is not Ok )

Hi

I have a dm600 and occasionally I have to untick (disable the dhcp) on the box. then run the box again before re-activating the dchp. This resets the IP address and runs ok. The submask should be the same as your pc and if you run dchp it should be automatic.
Have you tried using an ftp with your ipaddress to connect ?

If you are using windows tick your windows connections to automatically obtain an ip address.

in my case i can connect using ftp from pc via winscp and place a free cline from this site but none of the channels work even for a minute. the fta channels work ok. dont know if the internet was the problem or if the 5-7 clines i try just didnt work.