Open Pli 3 problems with Cccam and Mgcamd

[sasho123]

Hi

after upgrade to last Openpli 3 I got problems with Cccam - does not want to open anything as a share and very difficult opens CW as a emu but that Is after many reboots and very occasionally
the same Is with Mgcamd 1.38 used as a emulator

anyone that has same problem

[gianni253]

Re: Open Pli 3 problems with Cccam and Mgcamd

From a command shell, try command "top" to check if there is some process looping that is eating all of your cpu.

[sasho123]

Re: Open Pli 3 problems with Cccam and Mgcamd

thank you for reply

how can I reach that command shell

[gianni253]

Re: Open Pli 3 problems with Cccam and Mgcamd

thank you for reply

how can I reach that command shell

from windows command prompt "telnet ***.***.***.***" (without quotes), where ***.***.***.*** is the ip address of your box.
You will be asked for userid (root) and password.

[sasho123]

Re: Open Pli 3 problems with Cccam and Mgcamd

sometime when I zap to a scrambled chn I see that box Is connecting to a server as It shows server address but service can not be opened - black screen

[gianni253]

Re: Open Pli 3 problems with Cccam and Mgcamd

sometime when I zap to a scrambled chn I see that box Is connecting to a server as It shows server address but service can not be opened - black screen

It depends on the quality and load of the server you are connecting to.
If it's a free server then it's normal ... you could even wait for ever with no vision.
If you connect to a private server, with an account only for you, you should have vision immediately.

[sasho123]

Re: Open Pli 3 problems with Cccam and Mgcamd

normally when you wait for a channel to open you don't see encryption used as different color highlated letter - that Is when picture Is decoded
as a said after 1 or 2 reboot sometime I can open channels which can be open free on emulator
when I zap to a scrambled channel and try to open with line - sometime I get server name which give line and different color highlated system encryption but still channel Is not opened
so problem Is not server

[gianni253]

Re: Open Pli 3 problems with Cccam and Mgcamd

I don't know exactly in OpenPli but normally, when a channel is decoded correctly, ecm info on OSD will display:
- how the channel was decoded (FTA/Emu/Network);
- Crypto systems available and the one that was used for decoding;
- other info such as server nameort (if network was used), ecm pid, ecm time

Please, report these info when you have blank screen.

[sasho123]

Re: Open Pli 3 problems with Cccam and Mgcamd

look here what I am getting
_http://imageshack.us/photo/my-images/22/openpli3.png/

[gianni253]

Re: Open Pli 3 problems with Cccam and Mgcamd

look here what I am getting
_http://imageshack.us/photo/my-images/22/openpli3.png/

n*s is green so it has been decoded correctly, but I can't read ecm time ... what is the number and the unit ?
I ask because if it is too high it is just like you have not at all.
Try with a channel with a different cod*ng system, such as viacc*ss, always decoded by network, and last with a cod*ng system decoded by emu, such as se*a (R*I Italy) and report here

[digicon]

Re: Open Pli 3 problems with Cccam and Mgcamd

I Just tried OpenPLI on my VU Uno today and CCcam worked no problem by default it installs from the very first setup menu after that any other cams can be had from the feeds, the version of CCcam it installed was 2.3.0

[sasho123]

Re: Open Pli 3 problems with Cccam and Mgcamd

I Just tried OpenPLI on my VU Uno today and CCcam worked no problem by default it installs from the very first setup menu after that any other cams can be had from the feeds, the version of CCcam it installed was 2.3.0

openpli 3 or some older version 2
I use Cccam 2.21

[digicon]

Re: Open Pli 3 problems with Cccam and Mgcamd

openpli 3 or some older version 2
I use Cccam 2.21

No iused the latest Build dated 22/12/2012 OpenPLI 3.0 with OE 2.0 all worked fine for me as i say on the initial install it asks you to install a Cam which is CCcam 2.3.0