Funcar + DM500 + Unlimited

[kilimpasb]

Greetings to all.
I have the harware below:
Fyncard 4
DM500 receiver
Infinity unlimited card programmer.

I never had the correct guide to program the funcard to use it on dreambox so all i'm asking, after days (weeks?) of searching around and testing testing testing with no results, is:
Is there a complete guide to help me use my equipment propertly so i wont throu everything out of the balcony soon?
All i am asking (probably thats all) is a way to test everything so i dont waste my time testing in wrong basis.

Thanks people from planet help.

[bong1]

Re: Funcar + DM500 + Unlimited

the softcam with the latest keys will open more than the fun card will
the infinity should be set up just select your card from the menu and load the 2 files the right way round
what cam are you using to read the card

ignore the auto check if you know your card already



The Infinity USB Programmer software:

I assume that you have already connected the programmer and installed the software on your PC.
If it's the first time you use this software, then first check if your software is configured properly.

All preparations done?
Then let's start programming!


Unless you have configured the software to start in Phoenix mode, this is the default screen you will see after starting the Infinity software.



Insert the card you want to program and wait until the software has detected what kind of card it is.
The detection should be almost instant. Detection is done on the processor type of your card.
If the card type you inserted is available in different versions (different Eeprom configurations) then the software will warn you about that. If you know what type of Eeprom you have, you can set the card type manually. If not, let the software do the detection.




As soon as the card is recognized, the buttons Write, Read and Erase at the bottom will become active, and so will the chip symbol next to the Phoenix button.



If they don't become active, or if the card type is not displayed correctly, check if your card is inserted properly.
I have noticed that PCB type cards will require some force to insert them completely.

I have used a Funcard for purpose of this tutorial.
Now press the Open File icon to open the Flash file.
From the selection screen, select the correct Flash file.



Do the same for the internal Eeprom file.



And for the external Eeprom file.



Now you should see all files loaded on the appropriate lines.
But there is more to see in this window.
The Infinity software also shows the amount of file space occupied by the selected files.
I have colored the volume bars red in this sample.
As you can see, this file set that I used, occupies the complete internal Eeprom, but only a part of the available Flash space. The external Eeprom is only filled about 50%.



Normally the volume bars are dark gray, as you can see in the screenshot below.

As said on several occasions before:
It is advisable to always erase your card before programming it.
Now click the Erase button to erase the card before programming.



When the card is erased, click the Done button.



Now press the Writebutton.



When the card is written, press the Done button.



That's it.
Very easy and very fast.
i ripped this from another site not my mork

[kilimpasb]

Re: Funcar + DM500 + Unlimited

Ok Thanks for your time.
Every line is useful on my case.