More than 4 lnbs?

[BM300]

Re: More than 4 lnbs?

here are the setup
LNB 1:

Configuration Mode: Advanced
Satelitte: Your Choice of sat position
LNB: Lnb1
Priority: Auto
LOF: Universal Lnb
Voltage Mode: Polarization
Increased Voltage: No
Tone Mode: Band
DiseqC Mode: 1.1
Tone Burst: None
Committed DiseqC Command: AA
Fast DiseqC: Yes
Sequence Repeat: Yes
Command Order: Committed,Uncommitted,Toneburst
Uncommitted DiseqC Command: Input1
DiseqC Repeats: One

LNB 2:

Configuration Mode: Advanced
Satelitte: Your Choice of sat position
LNB: Lnb1
Priority: Auto
LOF: Universal Lnb
Voltage Mode: Polarization
Increased Voltage: No
Tone Mode: Band
DiseqC Mode: 1.1
Tone Burst: None
Committed DiseqC Command: AB
Fast DiseqC: Yes
Sequence Repeat: Yes
Command Order: Committed,Uncommitted,Toneburst
Uncommitted DiseqC Command: Input1
DiseqC Repeats: One

LNB 3:

Configuration Mode: Advanced
Satelitte: Your Choice of sat position
LNB: Lnb1
Priority: Auto
LOF: Universal Lnb
Voltage Mode: Polarization
Increased Voltage: No
Tone Mode: Band
DiseqC Mode: 1.1
Tone Burst: None
Committed DiseqC Command: BA
Fast DiseqC: Yes
Sequence Repeat: Yes
Command Order: Committed,Uncommitted,Toneburst
Uncommitted DiseqC Command: Input1
DiseqC Repeats: One

LNB 4:

Configuration Mode: Advanced
Satelitte: Your Choice of sat position
LNB: Lnb1
Priority: Auto
LOF: Universal Lnb
Voltage Mode: Polarization
Increased Voltage: No
Tone Mode: Band
DiseqC Mode: 1.1
Tone Burst: None
Committed DiseqC Command: BB
Fast DiseqC: Yes
Sequence Repeat: Yes
Command Order: Committed,Uncommitted,Toneburst
Uncommitted DiseqC Command: Input1
DiseqC Repeats: One

LNB 5:

Configuration Mode: Advanced
Satelitte: Your Choice of sat position
LNB: Lnb1
Priority: Auto
LOF: Universal Lnb
Voltage Mode: Polarization
Increased Voltage: No
Tone Mode: Band
DiseqC Mode: 1.1
Tone Burst: None
Committed DiseqC Command: AA
Fast DiseqC: Yes
Sequence Repeat: Yes
Command Order: Committed,Uncommitted,Toneburst
Uncommitted DiseqC Command: Input2
DiseqC Repeats: One

LNB 6:

Configuration Mode: Advanced
Satelitte: Your Choice of sat position
LNB: Lnb1
Priority: Auto
LOF: Universal Lnb
Voltage Mode: Polarization
Increased Voltage: No
Tone Mode: Band
DiseqC Mode: 1.1
Tone Burst: None
Committed DiseqC Command: AB
Fast DiseqC: Yes
Sequence Repeat: Yes
Command Order: Committed,Uncommitted,Toneburst
Uncommitted DiseqC Command: Input2
DiseqC Repeats: One

LNB 7:

Configuration Mode: Advanced
Satelitte: Your Choice of sat position
LNB: Lnb1
Priority: Auto
LOF: Universal Lnb
Voltage Mode: Polarization
Increased Voltage: No
Tone Mode: Band
DiseqC Mode: 1.1
Tone Burst: None
Committed DiseqC Command: BA
Fast DiseqC: Yes
Sequence Repeat: Yes
Command Order: Committed,Uncommitted,Toneburst
Uncommitted DiseqC Command: Input2
DiseqC Repeats: One

LNB 8:

Configuration Mode: Advanced
Satelitte: Your Choice of sat position
LNB: Lnb1
Priority: Auto
LOF: Universal Lnb
Voltage Mode: Polarization
Increased Voltage: No
Tone Mode: Band
DiseqC Mode: 1.1
Tone Burst: None
Committed DiseqC Command: BB
Fast DiseqC: Yes
Sequence Repeat: Yes
Command Order: Committed,Uncommitted,Toneburst
Uncommitted DiseqC Command: Input2
DiseqC Repeats: One
__________________

The above setup is for an DM800.
I think that a relay switch is needed for the DM500S for this set up



The setting should look like this

Here is an example of using the relay switch with 2x1-4 diseqc:

First 4 LNBs
Configuration Mode = advanced
Satellite = Hotbird 13E
Voltage mode = Polarization
Tone mode = Band
LNB = LNB 1 … 4
DiSEqC mode = 1.1
Toneburst = None
Committed DiSEqC command = AA, AB, BA, BB
Fast DiSEqC = Yes
Sequence repeat = Yes
Command order = uncommited, commited, toneburst
Uncommitted DiSEqC command = Input 1
DiSEqC repeats = none
LOF = Universal LNB
Increased voltage = yes (if wire is long)
Polarity = Auto
Tone Amplitude = 800mV



Next 4LNBs
Configuration Mode = advanced
Satellite = Badr 26E
Voltage mode = Polarization
Tone mode = Band
LNB = LNB 5 … 8
DiSEqC mode = 1.1
Toneburst = None
Committed DiSEqC command = AA, AB, BA, BB
Fast DiSEqC = Yes
Sequence repeat = Yes
Command order = uncommited, commited, toneburst
Uncommitted DiSEqC command = Input 2
DiSEqC repeats = none
LOF = Universal LNB
Increased voltage = yes (if wire is long)
Polarity = Auto
Tone Amplitude = 800mV

[mirny]

Re: More than 4 lnbs?

[dante_m1990]

Re: More than 4 lnbs?

you must use switcher with 8 input

[mirny]

Re: More than 4 lnbs?

you must use switcher with 8 input

or 1x DiqeQc 1.0 + 1x DiqeQc 1.1