DM simple diseqc bug

[1kreanga]

I need to access signal from LNB2 which is on my Diseqc 4-ports switch.

I've tried all possible variations of "Set Voltage and 22 kHz" and "Send DiSEqC only on satellite change" in Advanced mode but signal wa never "on".

If I try to switch to my LNB2 using Simple mode, everything works fine.

Is there some plugin or better image like PLI ?

[Fantom]

Re: DM simple diseqc bug

What image are you using ? Is it the Pli ? Try Gemini

[1kreanga]

Re: DM simple diseqc bug

yes, it is PLI. will try gemini. hope it is no problem in that image.

[thyristor44]

Re: DM simple diseqc bug

I had great problems with a cheap disecq switch on my dm500 or eagle as it realy is. Got a more expensive on and it is fine.
The cheap switch was fine on my humax though.

[1kreanga]

Re: DM simple diseqc bug

I suppose it is not about diseqc quality.
Just we need to add option "increase voltage and 22khz" to adv mode (as it is in simple mode).

[alfred_1]

Re: DM simple diseqc bug

I don't think its a case of changing Image.

[1kreanga]

Re: DM simple diseqc bug

I've tried in azbox. No problem to choose LNB2.

Also it is no problem to choose LNB2 in simple mode tunner setting.

But the same does not work in advanced mode!

[vimmers]

Re: DM simple diseqc bug

if u use advanced mode
then u shall set every lnb
satellite astra 19,2
lnb 1
diseqc mode 1.1
committed diseqc command aa
command order committed uncommitted tonebust
uncommitted diseqc command input 1
satellite hotbird
lnb 2
diseqc mode 1.1
committed diseqc command ab
command order committed uncommitted tonebust
uncommitted diseqc command input 1
satellite Sirius
lnb3
diseqc mode 1.1
committed diseqc command ba
command order committed uncommitted tonebust
uncommitted diseqc command input 1
satellite Thor
lnb4
diseqc mode 1.1
committed diseqc command bb
command order committed uncommitted tonebust
uncommitted diseqc command input 1

remember to set the satellites
to what your lnbs pointing on

[1kreanga]

Re: DM simple diseqc bug

you're the best friend!!!!
I couldn't find this for very very long time.

it works perfectly :-)