How to seeBulsat 39E on dreambox with fausto

[peremacedonia]

Bulsat 39E on dreambox with fausto

must first download a program Fausto 1:43 or 1:44 for windows.
Install a program in C / programfiles /

edit the file FaustoServers.cfg located in the path Fausto 1:44

C: \ Program Files \ Fausto \ EMU \ CardServer

In Fausto 1:43 is on the path

Utility / Emulator / config / Loadfile edit FaustoServers.cfg

when we open the file FaustoServers.cfg(open with notepad),put the following lines on file

N: 192.168.x.x 10000 0102030405060708091011121314 {0100/000030 00002A 000068 000084 000085 000086 00009B}
N: 192.168.x.x 10100 0102030405060708091011121314 {0500/007400 021110 022C00 024300 024400 030700 032500}
N: 192.168.x.x 10200 0102030405060708091011121314 {1801/00C102 002111 001101}
N: 192.168.x.x 10300 0102030405060708091011121314 {0B01/000000}
N: 192.168.x.x 10400 0102030405060708091011121314 {0604/000000 000001}
N: 192.168.x.x 10500 0102030405060708091011121314 {0608/000000}
N: 192.168.x.x 10600 0102030405060708091011121314 {0622/000000}
N: 192.168.x.x 10700 0102030405060708091011121314 {1722/001101}

at the end of the file save.

Remember that 192.168.x.x is Ip from your PC.
If you dont know which is the IP of your PC, click Start Run, type cmd press ok,and then in cmd type ipconfig and press enter-


Now to edit CCcam.cfg file. Connect with FTP to your dream and go to

Var / etc / CCcam.cfg

also open the file with notepad and add the following lines

N: 192.168.x.x 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 192.168.x.x 10100 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 192.168.x.x 10200 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 192.168.x.x 10300 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 192.168.x.x 10400 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 192.168.x.x 10500 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 192.168.x.x 10600 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
N: 192.168.x.x 10700 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14

save the CCcam.cfg file.

Fausto 1:44 procedures
turn on Fausto.
Click on Tools
Click on emulator
Click on the server
Click on configuration
click open
Than click manager ( in the manager put a checkmark in the ECM and EMM debug )
and then click the load and start
then click on the monitor and on the yellow folder load Key.bin
open the last diablo Key.bin
EMPB is the best for me and you can regularly found on the forum.
then with dream go on one channel of bulsat package and it should be to
see picture.