smargo add help ubuntu

[birdman99]

Could someone walk me through how to add a smargo reader with a jsc card to a ubuntu linux 64bit server running 12.04 ubuntu.
already runing omnikey.

[bonilla]

Re: smargo add help ubuntu

Could someone walk me through how to add a smargo reader with a jsc card to a ubuntu linux 64bit server running 12.04 ubuntu.
already runing omnikey.

Hello birdman99 ,

Presuming the installation of Ubuntu was done without any error/problem ,you have to proceed ,for example,to the installation of oscam (I don't know if you have installed it yet).
I recommand Oscam because it includes the usb support for your smargo readers with your jsc card and also enables the WEBIF (web interface).

sudo apt-get install openssl
sudo apt-get install libssl-dev
sudo apt-get install cmake build-essential
sudo apt-get install gcc g++ cmake libpcsclite1 libpcsclite-dev subversion
cd /usr/src
sudo wget http://cdnetworks-us-2.dl.sourceforg...-1.0.8.tar.bz2 
sudo tar xjvf libusb-1.0.8.tar.bz2
cd libusb-1.0.8
sudo ./configure --enable-shared=no
sudo make
sudo make install
cd /usr/src
sudo svn co http://streamboard.gmc.to/svn/oscam/trunk  oscam
cd oscam
sudo mkdir build
cd build
sudo cmake -DWEBIF=1 ..
sudo make

Then you have to copy oscam to /bin and begin the setup of the config files.

sudo cp oscam /bin/oscam
sudo pico /usr/local/etc/oscam.conf

[global]
nice	 = -1
WaitForCards = 1
pidfile	 = /var/run/oscam.pid
logfile	 = /var/log/oscam.log
usrfile	 = /var/log/oscamuser.log
cwlogdir = /var/log/cw
maxlogsize = 10000

[newcamd]
port = 10000@096C:000000
key = 0102030405060708091011121314

[webif]
httpport = 8888
httpuser = user
httppwd = pass
httprefresh = 0
httpallowed = 127.0.0.1,192.168.0.1-192.168.0.254
httphideidleclients = 0
httpreadonly = 0

And then

sudo pico /usr/local/etc/oscam.server

For your smargo reader plugged in your USB port(you can identify the device by running lsusb and changing 003:002 to what suits your system)

[reader]
label =Jsc
protocol =SmartReader
detect =CD
group =1
emmcache =1,1,2
ecmcache =1
device =003:002
caid =0XXC
boxid=****** ## (to generate this, take your box serial number, drop the last digit and convert to HEX)

Tell me if it suits to you and if you need help