OSCam and TNTSAT

[njb]

Sine a month I've been on hollidays and let my server on and OK.
The config was a dream 500 with couple OSCam/CCcam and the local card TNTSAT.
Everythings was working well,
I could read and share locally my TNTSAT.
Now I have a black screen.

Someone could please confirm that OSCam is still reading old TNTSAT on a DM500 under Datkstar II with the couple OSCam/CCcam .

Or just tell me what is the good config to read and share an old TNTSAT Card on a DM800.

Thank You

NjB

[uttnls]

Re: OSCam and TNTSAT

It should be, at least on 15 was working fine:

[njb]

Re: OSCam and TNTSAT

Well I can confirm it's OK now :

TNTSAT on a Vu+ (image VTI) with OScam 5654

NjB

But I have to try on a dm500 clone with same EMU.
And also I have to test sharing with client CCcam.

I'll come back to give results.

NjB

It works on the Vu+
But it doesn't work on a clone dm500 with same EMU

NjB

I ve made sompe test with the TNTSAT and oscam.
Give the result of my work and time to all the satlover community.
Four posts to give the results in reel time.

All regroups in one post.
It doesn't really reflect the history of my tests and time spent to do them.

Thank you to satlover team for this motivation for my usefull posts

NjB

[erno]

Re: OSCam and TNTSAT

You have to specify that the TNTsat HD channels can not be cleared/shared with CCCam due to a change of ECM length.
The only setup that works, is to use dvbapi, but in that case you have no reshare of your tntsat card.

[jhack159]

Re: OSCam and TNTSAT

Hello,

I am trying to read my TNTSAT Card with oscam on my dreambox7000 & openpli image.
But I don't have the good config files
can anyone helpme ?

tnx

Jack

[erno]

Re: OSCam and TNTSAT

There you go pal, but only with dvbapi:


oscam.conf

[global]
logfile = /tmp/oscam.log
usrfile = /tmp/oscamuser.log
cachedelay = 120
nice = -19
saveinithistory = 1
preferlocalcards = 1
lb_mode = 1
lb_save = 200

[cccam]
port = VotrePort
version = 2.2.1
reshare = 1
updateinterval = 60
minimizecards = 1
stealth = 1

[webif]
httpport = PortWebIF
httpuser = UserWebIF
httppwd = PassWebIF
httprefresh = 30
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httphideidleclients = 1
httpreadonly = 0
httpsavefullcfg = 0

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox ----> ou ( dbox2 | dm7000 | duckbox | ufs910 | ipbox | ipbox-pmt | qboxhd | coolstream | neumo )
user = localuser

oscam.dvbapi

I: 0500:030B00:2009 # TNTSat - Canal+
I: 0500:030B00:200A # TNTSat - Canal+ Decale
I: 0500:030B00:200B # TNTSat - Canal+ Cinema
I: 0500:030B00:200C # TNTSat - Canal+
I: 0500:030B00:200D # TNTSat - Canal+ Family
I: 0500:030B00:2010 # TNTSat - Canal+ Sport
I: 0500:030B00:2261 # TNTSat - Canal+ HD
I: 0500:030B00:2262 # TNTSat - Canal+ DECALE HD
I: 0500:030B00:2263 # TNTSat - Canal+ CINEMA HD
I: 0500:030B00:2264 # TNTSat - Canal+ SPORT HD
I: 0500:030B00:2265 # TNTSat - Canal+ FAMILY HD
I: 0500:030B00:2275 # TNTSat - Canal+ HD
I: 0500:030B00:2276 # TNTSat - Canal+ DECALE HD
I: 0500:030B00:2277 # TNTSat - Canal+ CINEMA HD
I: 0500:030B00:2278 # TNTSat - Canal+ SPORT HD
I: 0500:030B00:2279 # TNTSat - Canal+ FAMILY HD
I: 0500:030B00:227F # TNTSat - Canal+ HD
I: 0500:030B00:4284:1788 # TNTSat - NT1
I: 0500:030B00:4290:1788 # TNTSat - NT1
P: 0500:030B00 # TNTSAT


oscam.server
[reader]
label = tntsat
protocol = internal
device = /dev/sci0
detect = cd
mhz = 357
cardmhz = 357
caid = 0500
ident = 0500:030B00
aeskeys = 0500@030B00:43********43,A7********26,EF********E3


group = 1
emmcache = 1,3,2
lb_weight = 200

[reader]
label = Serveur1
protocol = cccam
device = DyndnsServeur1,PortServeur1
user = LoginServeur1
password = PassServeur1
group = 1
cccversion = 2.2.1
cccmaxhops = 1
ccckeepalive = 1

[reader]
label = Serveur2
protocol = cccam
device = DyndnsServeur2,PortServeur2
user = LoginServeur2
password = PassServeur2
group = 1
cccversion = 2.2.1
cccmaxhops = 1
ccckeepalive = 1

oscam.user
[account]
user = localuser
group = 1
au = tntsat ----> ( A priori inutile pour une TNTSAT )
cccreshare = 1
uniq = 1

[account]
user = Client1
pwd = PassClient1
group = 1
cccmaxhops = 1
cccreshare = 1
uniq = 1

[account]
user = Client2
pwd = PassClient2
group = 1
cccmaxhops = 1
cccreshare = 1
uniq = 1

[jhack159]

Re: OSCam and TNTSAT

Hello

Tnx @Erno for config files.

I can now see tne tnt channel.

but the oscam doent start at boot.
only when I do by telnet:
oscam -d 255

how can I start at boot of my dreambox 7000 (enigma1) the oscam cam ?
how can start / stop it manualy ?

What line must I add to a local client (second dreambox in the house)
c line in cccam.cfg file on the second dreambox ?

Tnx for all help

Jack

[jhack159]

Re: OSCam and TNTSAT

Hello,

I find the problem.
the start/stop scripts was with 600 attribute -> make it to 755

now it work fine on my dm7000

tnx for help

Jack

[buiacco]

Re: OSCam and TNTSAT

I've found this config :

oscam.config

[global]
nice = -19
WaitForCards = 1
ClientTimeout = 5
LogFile = stdout
Level = 15
CacheDelay = 120
saveinithistory = 1

[newcamd]
key = 0102030405060708091011121314
port = 10000@0500:030b00

##################################################

oscam.server

[reader]
label = tntsat
protocol = internal
device = /dev/sci0
group = 1
caid = 0500
EMMCache = 1,3,2
Detect = CD
AESKey = EF3CB8D36A862097A33FC47101041BE3
ReconnectTimeout = 20

##################################################

oscam.user

[account]
user = Oscam
pwd = TNTSAT
group = 1
au = tntsat
ident = 0500:030b00
caid = 0500
uniq = 0
monlevel = 2

##################################################

CCcam.cfg

N: 127.0.0.1 10000 Oscam TNTSAT 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

[stalwart]

Re: OSCam and TNTSAT

Can somebody post a config file for german sky with dvbapi settings?
Like above, just for german sky.

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox ----> ou ( dbox2 | dm7000 | duckbox | ufs910 | ipbox | ipbox-pmt | qboxhd | coolstream | neumo )
user = localuser

oscam.dvbapi

I: 0500:030B00:2009 # TNTSat - Canal+
I: 0500:030B00:200A # TNTSat - Canal+ Decale
I: 0500:030B00:200B # TNTSat - Canal+ Cinema