Oscam-ubuntu

[peremacedonia]

How to get OSCAM working on UBUNTU


Code:

cd /lib/
sudo ln -s libcrypto.so.0.9.8e libcrypto.so.0.9.8
sudo apt-get install yum
cd /usr/local/bin/
sudo apt-get install subversion
sudo svn co http://oscam.ump2002.net/svn/oscam/trunk oscam-svn
cd oscam-svn/
sudo apt-get install cmake
sudo mkdir build_dir
cd build_dir
sudo cmake /usr/local/bin/oscam-svn
sudo make
sudo make install

now make your configuration files and place them in /usr/local/etc

oscam.server
Code:

[reader]
label = fx
protocol = mouse
detect = CD
device = /dev/ttyUSB0
mhz = 600
EMMCache = 1,1,2
Group = 1
caid = 096c
boxid = ********

oscam.conf
Code:

[global]
nice = -19
WaitForCards = 1
[monitor]
port = 988
aulow = 120
monlevel = 0
[newcamd]
key = 0102030405060708091011121314
port = 10000@096c:000000;

oscam.user
Code:

[account]
user = test
pwd = test
uniq = 1
group = 1
au = fx
ident = 096c:000000
caid = 096c

now back to terminal:
Code:

sudo oscam -b

now check /var/log/oscam.log for the news..

also,

to calculate boxkey for the new orange sub:
1. get your 11 digit box serial (101*******5)
2. remove the last digit ONLY (101*******) and type it in the windows cal in dec mode
3. click hex. this will give you the exact 8 digit hex to put in your oscam.server.

[peremacedonia]

Re: OSCAM Tutorial - For DM500

DM500C clone with Gemini 4.10 as a server and a client DM500S clone with PLi running CCcam 2.1.14 with N line configured.

Step 1. Using the DM500c, I downloaded from the Gemini site, oscam_0.99.4 and the associated config files.

Step 2. Edited the following files;

oscam.conf
[global]
logfile = /dev/tty
clienttimeout = 99999
fallbacktimeout = 99998
clientmaxidle = 99999
cachedelay = 0
bindwait = 120
resolvedelay = 30
nice = -1
serialreadertimeout = 1500
maxlogsize = 50
waitforcards = 1
saveinithistory = 1
readerrestartseconds = 5

[monitor]
port = 10003
aulow = 120
monlevel = 1

[newcamd]
port = 10000@090b:000000
key = 0102030405060708091011121314
keepalive = 1



------------------------------------------------
oscam.server
[reader]
label = internalreader
enable = 1
protocol = internal
device = /dev/sci0
caid = 090b
detect = cd
mhz = 780
cardmhz = 357
group = 1
emmcache = 1,3,2
ecmcache = 1

------------------------------------------------

oscam.user

[account]
user = client1
pwd = client1
group = 1
uniq = 1
monlevel = 1
au = internalreader
caid = 090b
ident = 090b:000000
keepalive = 1


I found that having logfile = /dev/tty, helps in debugging/troubleshooting if in case you have errors, as this sends the log to the screen.

Take note that after you get oscam going, you might want to turn off the logging, using disablelogfile = 1.

The CAID in the example above is for the Bluey, Fruity is 096C.

Step 3: When all config files are in order, start up oscam and hey presto moving pictures!!!

[uttnls]

Re: Oscam-ubuntu

How to get OSCAM working on UBUNTU


Code:

cd /lib/
sudo ln -s libcrypto.so.0.9.8e libcrypto.so.0.9.8
sudo apt-get install yum
cd /usr/local/bin/
sudo apt-get install subversion
sudo svn co http://oscam.ump2002.net/svn/oscam/trunk oscam-svn
cd oscam-svn/
sudo apt-get install cmake
sudo mkdir build_dir
cd build_dir
sudo cmake /usr/local/bin/oscam-svn
sudo make
sudo make install

now make your configuration files and place them in /usr/local/etc

oscam.server
Code:

[reader]
label = fx
protocol = mouse
detect = CD
device = /dev/ttyUSB0
mhz = 600
EMMCache = 1,1,2
Group = 1
caid = 096c
boxid = ********

oscam.conf
Code:

[global]
nice = -19
WaitForCards = 1
[monitor]
port = 988
aulow = 120
monlevel = 0
[newcamd]
key = 0102030405060708091011121314
port = 10000@096c:000000;

oscam.user
Code:

[account]
user = test
pwd = test
uniq = 1
group = 1
au = fx
ident = 096c:000000
caid = 096c

now back to terminal:
Code:

sudo oscam -b

now check /var/log/oscam.log for the news..

also,

to calculate boxkey for the new orange sub:
1. get your 11 digit box serial (101*******5)
2. remove the last digit ONLY (101*******) and type it in the windows cal in dec mode
3. click hex. this will give you the exact 8 digit hex to put in your oscam.server.

Oscam also has a capability that cccam dosen't, you can read PCSC cards, all you have to do is change protocol to pcsc and specific card settings

Also to make a custom config directory and to run configs from there you can use ./oscam -c /var/myoscamconfigs/

[peremacedonia]

Re: Oscam-ubuntu

What cards are PCSC cards?