Newcamd config in win pc

[Boxaren]

Hi
I have configured my Oscam and have contact with my cards.

What i have understood is that you need to configure the newcamd to be able to be connected ouside my Lan if i have a dreambox placed in my summer cottege and whant this one to be connected to my windows pc which are working as a server with oscam including configured my router with a dyndns configuration/account.

Could anyone tell me how te newcamd etc. should look like in the server file or what i'm missing, since i cant find any related topic in the forum or i dont understand if there is any related items which could solve this issue?

My Newcamd:
port = 10011@0B00:1F1F1F;10003@0500:023200,023210,023220, 023230,023240,FFF510
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1

My cws in the dreambox:

#CWS_MULTIPLE = Mydream.dyndns.org. 10011:10003 Avatar 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan Dream.tvserv
CWS = Mydream.dyndns.org 10011 Avatar 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan Dream.tvserv
CWS = Mydream.dyndns.org 10003 Avatar 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan Dream.tvserv
CWS_CONNECT_TIMEOUT = 20
CWS_INCOMING_PORT = 12000
CWS_DEBUG_PORT = 12001
CWS_KEEPALIVE = yes

My User config:
user = Avatar
pwd = password1
caid = 0B00,093E
monlevel = 4
au = 1
group = 1,2
ident = 0B00:000000;093E:000000

[gianni253]

Re: Newcamd config in win pc

Did you set up port forwarding (virtual server) for the two ports ?
Of course, it must be done on the server side router.
In any case , in order to check client/server config files, you can do your tests inside your home lan.
In this way you don't need port forwarding but must use local ip addresses instead of dyndns host names.

[Boxaren]

Re: Newcamd config in win pc

yes i have opend the ports in my router, i have also tried with my lan but did not have any succes so i must have done some radical faults.

[KVF1966]

Re: Newcamd config in win pc

The simplest method is to use the ping, and you can see there is a connection or not,

[gianni253]

Re: Newcamd config in win pc

yes i have opend the ports in my router, i have also tried with my lan but did not have any succes so i must have done some radical faults.

Post all of your oscam config files (hide sensitive data !) or, alternatively, post oscam startup log, just to check there are no errors in configuration.

[Boxaren]

Re: Newcamd config in win pc

The questions was if i have done my homework or not or if i need to modify my settings to achive the result.

nice = -1

[Logging]

logfile =./oscam.log
usrfile = ./oscam/oscamuser.log
cwlogdir = ./oscam/log/oscam/cw

[newcamd]


port = 10011@0B00:1F1F1F;10003@0500:023200,023210,023220, 023230,023240,FFF510
key = 0102030405060708091011121314
allowed = 127.0.0.1,192.168.0.0-192.168.255.255
keepalive = 1
mgclient = 1



[monitor]
port = 988
aulow = 120
monlevel = 1

[webif]
httpport = 9999
httpuser = Avatar
httppwd = Dream
httpallowed = 192.168.1.1-198.168.1.255
aulow = 120

[dvbapi]

#enabled = 1

#user = user1

#demux = /dev/dvb/adapter0/demux0

#ca = /dev/dvb/adapter0/ca1

#socket = /tmp/camd.socket

[gianni253]

Re: Newcamd config in win pc

We can't tell from what you have posted if you have done your homework well.
You could have everything perfect but the card upside-down or a cable unplugged and we would never know.
Debugging was made just for troubleshooting errors.
Set debug level to 255 and post your oscam.log file.

[Boxaren]

Re: Newcamd config in win pc

Ok here is the log from web if
2012/12/30 20:14:18 D9AAB8 r cd [mouse] card detected
2012/12/30 20:14:21 D9AAB8 r cd [mouse] Error activating card.
2012/12/30 20:14:23 D9AAB8 r cd [mouse] ATR: 3B 24 00 30 42 30 30
2012/12/30 20:14:23 D9AAB8 r cd [mouse] Init card protocol T0, FI=1, F=372, D=1, N=0
2012/12/30 20:14:23 D9AAB8 r cd [mouse] Setting baudrate to 9600 bps
2012/12/30 20:14:23 D9AAB8 r cd [mouse] Calculated work ETU is 104.20 us
2012/12/30 20:14:23 D9AAB8 r cd [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user cardspeed of 3.57 Mhz (specified in reader->mhz)
2012/12/30 20:14:26 D9AAB8 r cd [mouse] type: Conax, caid: 0B00, serial: ##########, hex serial: ########, card: v64
2012/12/30 20:14:26 D9AAB8 r cd [mouse] Providers: 1
2012/12/30 20:14:26 D9AAB8 r cd [mouse] Provider: 1 Provider-Id: 000000
2012/12/30 20:14:26 D9AAB8 r cd [mouse] Provider: 1 SharedAddress: 0021E561
2012/12/30 20:14:26 D9AAB8 r cd [mouse] found card system conax
2012/12/30 20:14:30 D9AAB8 r cd [conax] Package: 1, id: 6010, classes: 01B87FC5, date: 2012/05/01 - 2012/05/31, name: Canal +
2012/12/30 20:14:30 D9AAB8 r cd [conax] Package: 2, id: 6010, classes: 01B87FC5, date: 2012/04/01 - 2012/04/30, name: Canal +
2012/12/30 20:14:30 D9AAB8 r cd [conax] Package: 3, id: 6020, classes: 01FFFDFF, date: 2012/05/01 - 2012/05/31, name: Nordic 1
2012/12/30 20:14:30 D9AAB8 r cd [conax] Package: 4, id: 6020, classes: 01FFFDFF, date: 2012/04/01 - 2012/04/30, name: Nordic 1
2012/12/30 20:14:30 D9AAB8 r cd [conax] Package: 5, id: 6030, classes: 01000007, date: 2008/08/03 - 2008/08/21, name: Nordic 2
2012/12/30 20:14:30 D9AAB8 r cd [conax] Package: 6, id: 6030, classes: 01000007, date: 1990/01/01 - 1990/01/01, name: Nordic 2
2012/12/30 20:14:30 D9AAB8 r cd [conax] Package: 7, id: 6040, classes: 0107C388, date: 2012/05/01 - 2012/05/31, name: Nordic 3
2012/12/30 20:14:30 D9AAB8 r cd [conax] Package: 8, id: 6040, classes: 0107C388, date: 2012/04/01 - 2012/04/30, name: Nordic 3
2012/12/30 20:14:30 D9AAB8 r cd [conax] Package: 9, id: 6050, classes: 010004F2, date: 2008/08/03 - 2008/08/21, name: TSS
2012/12/30 20:14:30 D9AAB8 r cd [conax] Package: 10, id: 6050, classes: 010004F2, date: 1990/01/01 - 1990/01/01, name: TSS
2012/12/30 20:14:33 D9AAB8 r cd [conax] Package: 11, id: 6060, classes: 016BAF2F, date: 2012/05/01 - 2012/05/31, name: Nordic 4
2012/12/30 20:14:33 D9AAB8 r cd [conax] Package: 12, id: 6060, classes: 016BAF2F, date: 2012/04/01 - 2012/04/30, name: Nordic 4
2012/12/30 20:14:33 D9AAB8 r cd [conax] Package: 13, id: 6070, classes: 01601000, date: 2012/05/01 - 2012/05/31, name: Nordic 5
2012/12/30 20:14:33 D9AAB8 r cd [conax] Package: 14, id: 6070, classes: 01601000, date: 2012/04/01 - 2012/04/30, name: Nordic 5
2012/12/30 20:14:33 D9AAB8 r cd [conax] Package: 15, id: 6080, classes: 01148100, date: 2012/05/01 - 2012/05/31, name: HD
2012/12/30 20:14:33 D9AAB8 r cd [conax] Package: 16, id: 6080, classes: 01048000, date: 2012/04/01 - 2012/04/30, name: HD
2012/12/30 20:14:33 D9AAB8 r cd [conax] Package: 17, id: 8011, classes: 01000040, date: 2012/12/01 - 2012/12/31, name: 8011
2012/12/30 20:14:33 D9AAB8 r cd [conax] Package: 18, id: 8011, classes: 01000040, date: 2012/11/01 - 2012/11/30, name: 8011
2012/12/30 20:14:33 D9AAB8 r cd [conax] Package: 19, id: 8013, classes: 01000001, date: 2012/12/01 - 2012/12/31, name: 8013
2012/12/30 20:14:33 D9AAB8 r cd [conax] Package: 20, id: 8013, classes: 01000001, date: 2012/11/01 - 2012/11/30, name: 8013
2012/12/30 20:14:34 D9AAB8 r cd [conax] Package: 21, id: 8010, classes: 01000020, date: 2012/12/01 - 2012/12/31, name: 8010
2012/12/30 20:14:34 D9AAB8 r cd [conax] Package: 22, id: 8010, classes: 01000020, date: 2012/11/01 - 2012/11/30, name: 8010
2012/12/30 20:14:34 D9AAB8 r cd [conax] ready for requests

[gianni253]

Re: Newcamd config in win pc

There should be an entry saying:

newcamd: initialized (fd=6, port=***x, crypted)

From this log we can't see that newcamd protocol is initialized.
Try with a more verbose log and redirect it to a file (oscam.log)
Also, during debug, try to connect with a client, so that we can check if client's request is reaching server.

[mirny]

Re: Newcamd config in win pc

Hi
I have configured my Oscam and have contact with my cards.

What i have understood is that you need to configure the newcamd to be able to be connected ouside my Lan if i have a dreambox placed in my summer cottege and whant this one to be connected to my windows pc which are working as a server with oscam including configured my router with a dyndns configuration/account.

Could anyone tell me how te newcamd etc. should look like in the server file or what i'm missing, since i cant find any related topic in the forum or i dont understand if there is any related items which could solve this issue?

My Newcamd:
port = 10011@0B00:1F1F1F;10003@0500:023200,023210,023220, 023230,023240,FFF510
key = 0102030405060708091011121314
keepalive = 1
mgclient = 1

My cws in the dreambox:

#CWS_MULTIPLE = Mydream.dyndns.org. 10011:10003 Avatar 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan Dream.tvserv
CWS = Mydream.dyndns.org 10011 Avatar 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan Dream.tvserv
CWS = Mydream.dyndns.org 10003 Avatar 01 02 03 04 05 06 07 08 09 10 11 12 13 14 wan Dream.tvserv
CWS_CONNECT_TIMEOUT = 20
CWS_INCOMING_PORT = 12000
CWS_DEBUG_PORT = 12001
CWS_KEEPALIVE = yes

My User config:
user = Avatar
pwd = password1
caid = 0B00,093E
monlevel = 4
au = 1
group = 1,2
ident = 0B00:000000;093E:000000

which cards exaactly, you're to trying to me it work?
because i see that you have defined in oscam/newcamd caids 0b00 and 0500. and in your user config is 0b00 and 093e.
and for your first question, no you dont need to use newcamd protocol to put your server outside, you can use cccam, camdxx aswell.
if you want to put it out you need to allow ports in your router as stated above. but for you, i'll reccomend to you use a cccam protocol, then you dont need to set up a new port for every other caid, you can use one port for many caids. and then dont define ident and provids. try it first like this. hope this help a bit.

[Boxaren]

Re: Newcamd config in win pc

Hi
I have two cards one for C-more (former canal digital) and Visat.

Now the following questions.
1. how do you set the debug level to 255?
2. how should the cccam config look like?
3. should i not use the newcamd protocoll?
4. the lines you put above is that for the cccam and if should i add a new line int config with this?

5. below is the latest log with change to ip instead of dyndns in cws file.

//By the way thank you for the help so far and happy new year

16:11:03 0 s ERROR: Cannot open file "./oscam.srvid" (errno=2 No such fil
e or directory)
16:11:03 0 s ERROR: Cannot open file "./oscam.tiers" (errno=2 No such fil
e or directory)
16:11:03 0 s ERROR: Cannot open file "./oscam.provid" (errno=2 No such fi
le or directory)
16:11:03 0 s ERROR: Cannot open file "./oscam.guess" (errno=2 No such fil
e or directory)
16:11:03 0 s ERROR: Cannot open file "./oscam.ird" (errno=2 No such file
or directory)
16:11:03 0 s ERROR: Cannot open file "./oscam.whitelist" (errno=2 No such
file or directory)
16:11:03 0 s ERROR: Cannot open file "./oscam.cacheex" (errno=2 No such f
ile or directory)
16:11:03 0 s Starting listener 0
16:11:03 0 s monitor: initialized (fd=3, port=10009)
16:11:03 0 s Starting listener 0
16:11:03 0 s camd35: disabled
16:11:03 0 s Starting listener 0
16:11:03 0 s cs378x: disabled
16:11:03 0 s Starting listener 0
16:11:03 0 s newcamd: initialized (fd=4, port=10011, ip=192.168.1.18, cry
pted)
16:11:03 0 s -> CAID: 0B00 PROVID: 1F1F1F
16:11:03 0 s Starting listener 1
16:11:03 0 s newcamd: initialized (fd=5, port=10003, ip=192.168.1.18, cry
pted)
16:11:03 0 s -> CAID: 0500 PROVID: 023200, 023210, 023220, 023230, 023240
, FFF510
16:11:03 0 s Starting listener 0
16:11:03 0 s pandora: disabled
16:11:03 0 s Starting listener 0
16:11:03 0 s csp: disabled
16:11:03 0 s Starting listener 0
16:11:03 0 s radegast: disabled
16:11:03 0 s starting thread http
16:11:03 0 s http thread started
16:11:03 E73128 h HTTP Server listening on port 9999
16:11:03 0 s starting thread reader check
16:11:03 0 s reader check thread started
16:11:03 0 s starting thread check
16:11:03 0 s check thread started
16:11:03 0 s cd [mouse] creating thread for device /dev/ttyS19
16:11:03 0 s viasat [mouse] creating thread for device /dev/ttyS9
16:11:03 0 s loadbalancer: can't read from file /Users/Denk/AppData/Local
/Temp/_oscam/stat
16:11:03 0 s anti cascading disabled
16:11:03 E65800 r viasat [mouse] Reader initialized (device=/dev/ttyS9, detect
=cd, mhz=357, cardmhz=357)
16:11:04 E64028 r cd [mouse] Reader initialized (device=/dev/ttyS19, detect=cd
, mhz=357, cardmhz=357)
16:11:04 E64028 r cd [mouse] card detected
16:11:08 E64028 r cd [mouse] Error activating card.
16:11:10 E64028 r cd [mouse] ATR: 3B 24 00 30 42 30 30
16:11:10 E64028 r cd [mouse] Init card protocol T0, FI=1, F=372, D=1, N=0
16:11:10 E64028 r cd [mouse] Setting baudrate to 9600 bps
16:11:10 E64028 r cd [mouse] Calculated work ETU is 104.20 us
16:11:10 E64028 r cd [mouse] ATR Fsmax is: 5 Mhz, clocking card to wanted user
cardspeed of 3.57 Mhz (specified in reader->mhz)
16:11:12 E64028 r cd [mouse] type: Conax, caid: 0B00, serial: ##########, hex
serial: ########, card: v64
16:11:12 E64028 r cd [mouse] Providers: 1
16:11:12 E64028 r cd [mouse] Provider: 1 Provider-Id: 000000
16:11:12 E64028 r cd [mouse] Provider: 1 SharedAddress: 0021E561
16:11:12 E64028 r cd [mouse] found card system conax
16:11:16 E64028 r cd [conax] Package: 1, id: 6010, classes: 01B87FC5, date: 20
12/05/01 - 2012/05/31, name: Canal +
16:11:16 E64028 r cd [conax] Package: 2, id: 6010, classes: 01B87FC5, date: 20
12/04/01 - 2012/04/30, name: Canal +
16:11:16 E64028 r cd [conax] Package: 3, id: 6020, classes: 01FFFDFF, date: 20
12/05/01 - 2012/05/31, name: Nordic 1
16:11:16 E64028 r cd [conax] Package: 4, id: 6020, classes: 01FFFDFF, date: 20
12/04/01 - 2012/04/30, name: Nordic 1
16:11:16 E64028 r cd [conax] Package: 5, id: 6030, classes: 01000007, date: 20
08/08/03 - 2008/08/21, name: Nordic 2
16:11:16 E64028 r cd [conax] Package: 6, id: 6030, classes: 01000007, date: 19
90/01/01 - 1990/01/01, name: Nordic 2
16:11:16 E64028 r cd [conax] Package: 7, id: 6040, classes: 0107C388, date: 20
12/05/01 - 2012/05/31, name: Nordic 3
16:11:16 E64028 r cd [conax] Package: 8, id: 6040, classes: 0107C388, date: 20
12/04/01 - 2012/04/30, name: Nordic 3
16:11:16 E64028 r cd [conax] Package: 9, id: 6050, classes: 010004F2, date: 20
08/08/03 - 2008/08/21, name: TSS
16:11:16 E64028 r cd [conax] Package: 10, id: 6050, classes: 010004F2, date: 1
990/01/01 - 1990/01/01, name: TSS
16:11:20 E64028 r cd [conax] Package: 11, id: 6060, classes: 016BAF2F, date: 2
012/05/01 - 2012/05/31, name: Nordic 4
16:11:20 E64028 r cd [conax] Package: 12, id: 6060, classes: 016BAF2F, date: 2
012/04/01 - 2012/04/30, name: Nordic 4
16:11:20 E64028 r cd [conax] Package: 13, id: 6070, classes: 01601000, date: 2
012/05/01 - 2012/05/31, name: Nordic 5
16:11:20 E64028 r cd [conax] Package: 14, id: 6070, classes: 01601000, date: 2
012/04/01 - 2012/04/30, name: Nordic 5
16:11:20 E64028 r cd [conax] Package: 15, id: 6080, classes: 01148100, date: 2
012/05/01 - 2012/05/31, name: HD
16:11:20 E64028 r cd [conax] Package: 16, id: 6080, classes: 01048000, date: 2
012/04/01 - 2012/04/30, name: HD
16:11:20 E64028 r cd [conax] Package: 17, id: 8011, classes: 01000040, date: 2
012/12/01 - 2012/12/31, name: 8011
16:11:20 E64028 r cd [conax] Package: 18, id: 8011, classes: 01000040, date: 2
012/11/01 - 2012/11/30, name: 8011
16:11:20 E64028 r cd [conax] Package: 19, id: 8013, classes: 01000001, date: 2
012/12/01 - 2012/12/31, name: 8013
16:11:20 E64028 r cd [conax] Package: 20, id: 8013, classes: 01000001, date: 2
012/11/01 - 2012/11/30, name: 8013
16:11:20 E64028 r cd [conax] Package: 21, id: 8010, classes: 01000020, date: 2
012/12/01 - 2012/12/31, name: 8010
16:11:20 E64028 r cd [conax] Package: 22, id: 8010, classes: 01000020, date: 2
012/11/01 - 2012/11/30, name: 8010
16:11:21 E64028 r cd [conax] ready for requests

[gianni253]

Re: Newcamd config in win pc

Ok, oscam seems to be running ok: newcamd is initialized for both cards and is waiting for requests; webif is initialized too and that comes good in troubleshooting.
In the end of your log I can't see any client requests ... I guess your problem is on client side.
Let's try this:
from the command line of a second pc in your lan try the command

telnet 192.168.1.18 10011

or

telnet 192.168.1.18 10003

You should see a short answer with garbage characters ... push enter again and the session will close.
In the meantime, if you open your browser on hxxp://192.168.1.18:9999, you should see:

client connected to 10011 port 
Connection closed to client 
anonymous disconnected from 192.168.1.***

Try these tests and let us know.

IMHO newcamd is a good protocol to use in wan: it's encrypted (safe), it's light (less traffic comparing with cc*am) and it's reliable (tcp based).
I wouldn't recommend camd35 because, even if it faster, it's udp based ... it means that if a packet is lost no retries will be done to retransmit the packet and you will have a freeze that lasts many seconds (you have to wait for the following ecm/cw).
On the contrary, if you have a tcp based protocol, in the worst case you will have a short glitch/pixellation, but it's likely you won't even realize of the retransmission.

[Boxaren]

Re: Newcamd config in win pc

Ok thanks
I have solved the problem. but the clients are connected as long as they are connected to my lan, but when i change my configuration (outside my lan) to use them via the dyndns i am getting this result in the log:

E3FD48 c encrypted newcamd:10003-client *********x granted (***xx, au=auto (4 reader))
[2013-01-03 21:09:43] - 21:09:42 E3E570 c encrypted newcamd:10011-client ****** granted (******, au=auto (4 reader))
[2013-01-03 21:09:43] - 21:09:42 E3FD48 c user ***xx authenticated successfully (mgcamd)
[2013-01-03 21:09:43] - 21:09:42 0 --- Skipped 1 duplicated log lines ---
[2013-01-03 21:09:43] - 21:09:42 E3FD48 c AU disabled for user ******
[2013-01-03 21:09:43] - 21:09:42 0 --- Skipped 1 duplicated log lines ---
[2013-01-03 21:09:43] - 21:09:42 E3FD48 c no valid CAID found in CAID for user '******x'
[2013-01-03 21:09:43] - 21:09:42 E3E570 c no valid PROVID(s) found in CAID for user '***xx'
[2013-01-03 21:09:43] - 21:09:42 E3E570 c SID list will not be send to mgcamd client.
[2013-01-03 21:09:46] - 21:09:46 0 --- Skipped 1 duplicated log lines ---
[2013-01-03 21:09:46] - 21:09:46 E51F60 c client connected to 10011 port
[2013-01-03 21:09:46] - 21:09:46 E51F60 c *********.dyndns: resolved ip=73******x
[2013-01-03 21:09:46] - 21:09:46 E51F60 c encrypted newcamd:10011-client 85.******x rejected (******, invalid ip)
[2013-01-03 21:09:46] - 21:09:46 E51F60 c hostname or ip mismatch for user ****** (mgcamd)
[2013-01-03 21:09:46] - 21:09:46 E51F60 c encrypted newcamd-client 85****** rejected (login failure)
[2013-01-03 21:09:46] - 21:09:46 E51F60 c anonymous disconnected from 85******