help oscam

[pavpav]

Hello guys I'm new, I have a problem in the configuration of oscam, I tried various attempts. I have a server with more cccam oscam with smargo hab with three satellite TV with sky ita and FreeXtv. Can someone help me? I'll post my error in oscam


2012/11/30 18:39:01 8E07A80 r ERROR, you have specified 'protocol = smartreader' in oscam.server,
2012/11/30 18:39:01 8E062A0 r recompile with SmartReader support.
2012/11/30 18:39:01 8E07A80 r recompile with SmartReader support.
2012/11/30 18:39:01 8E062A0 r Cannot open device: 001:004
2012/11/30 18:39:01 8E07A80 r Cannot open device: 001:005
2012/11/30 18:40:01 8E062A0 r ERROR, you have specified 'protocol = smartreader' in oscam.server,
2012/11/30 18:40:01 8E07A80 r ERROR, you have specified 'protocol = smartreader' in oscam.server,
2012/11/30 18:40:01 8E062A0 r recompile with SmartReader support.
2012/11/30 18:40:01 8E07A80 r recompile with SmartReader support.
2012/11/30 18:40:01 8E062A0 r Cannot open device: 001:004
2012/11/30 18:40:01 8E07A80 r Cannot open device: 001:005
2012/11/30 18:41:01 8E062A0 r ERROR, you have specified 'protocol = smartreader' in oscam.server,
2012/11/30 18:41:01 8E07A80 r ERROR, you have specified 'protocol = smartreader' in oscam.server,
2012/11/30 18:41:01 8E062A0 r recompile with SmartReader support.
2012/11/30 18:41:01 8E07A80 r recompile with SmartReader support.
2012/11/30 18:41:01 8E062A0 r Cannot open device: 001:004
2012/11/30 18:41:01 8E07A80 r Cannot open device: 001:005

oscam conf

[global]
logfile = /var/log/oscam.log
nice = -1
saveinithistory = 1

[monitor]
hideclient_to = 15
appendchaninfo = 1

[newcamd]
port = 34000@09CD:000000;35000@183D:000000,005411
key = 000102030405060708090A0B0C0D

[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 192.168.0.1-192.168.0.254

oscam user

[account]
user = tivusat
pwd = tivusatpass
group = 1
au = tvsat
caid = 183D
ident = 183D:000000,005411
cccignorereshare = 0
cccstealth = 0

[account]
user = skyitalia
pwd = skyitaliapass
group = 2
au = skyitalia
caid = 09CD
ident = 09CD:000000

oscam server

[reader]
label = tvsat
protocol = smartreader
device = 001:004
caid = 183D
detect = cd
mhz = 357
cardmhz = 368
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-g = 1


[reader]
label = skyitalia
protocol = smartreader
device = 001:005
caid = 09CD
boxid = 12345678
detect = cd
mhz = 480
cardmhz = 357
ident = 09CD:000000
group = 2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blocknano = all
audisabled = 1

[maxsatp]

Re: halp oscam

So what happens if you change
greetings
Maxsatp

============================================

oscam conf

[global]
logfile = /var/log/oscam.log
nice = -1
saveinithistory = 1

[monitor]
hideclient_to = 15
appendchaninfo = 1

[newcamd]
port = 34000@09CD:000000;35000@183D:000000,005411
key = 000102030405060708090A0B0C0D

[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 192.168.0.1-192.168.0.254

oscam user

[account]
user = tivusat
pwd = tivusatpass
group = 1
au = tvsat
caid = 183D
ident = 183D:000000,005411
cccignorereshare = 0
cccstealth = 0

[account]
user = skyitalia
pwd = skyitaliapass
group = 2
au = skyitalia
caid = 09CD
ident = 09CD:000000

oscam server

[reader]
label = tvsat
protocol = smargo
device = /dev/ttyUSB0
caid = 183D
detect = cd
mhz = 357
cardmhz = 368
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-g = 1


[reader]
label = skyitalia
protocol = smargo
device = /dev/ttyUSB1
caid = 09CD
boxid = 12345678
detect = cd
mhz = 480
cardmhz = 357
ident = 09CD:000000
group = 2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
blocknano = all
audisabled = 1

[ZoxPa]

Re: help oscam

From OScam wiki:
protocol = mouse (local cardreader)
= internal (all cardreader with "device=/dev/sciX")
= camd35|cs357x (cascading - camd 3.5-compatible remote server)
= mp35
= smartreader
= serial
= cs378x
= gbox
= newcamd|newcamd525
= newcamd524
= cccam
= radegast
= pcsc
= constcw
= sc8in1
= smargo

device = [<readertype>;]serial:serialnum|bus:device|<device|device:slot>|< ip|hostname>,<port>[,<lport>]|pcsc|<0|1>>|constantcw

readertype:
SR: Smartreader+ (default)
Infinity: Infinity USB
TripleP1: Smargo Triple Reader port 1
TripleP2: Smargo Triple Reader port 2
TripleP3: Smargo Triple Reader port 3

bus:device: bus name and device name of the smartreader+
(get the name with slusb 'Bus' ans 'Device'

serialnum: Serial-Nummer des Smartreader+ or Ininity USB (get the serial number while starting OSCam)

device: device name

device:slot: device name and slot number sc8in1 /1-8)
(only one sc8in1 reader supported)

ip|hostname: IP address or host name

port: TCP/IP port

lport: remapping to local TCP/IP port

PCSC: number of PCSC reader, starting with 0

0|1: for Coolstream HD-1 STB only: select reader 0 or reader 1

constantcw: constant CW file name


Examples for device parameters

device = /dev/ttyS0 # (Reader on COM1 (Linux i386 and Windows))
device = /dev/tts/1 # (Reader on COM2 (Linux dbox2 with multicam))
device = /dev/ttyUSB0 # (Reader on USB (Linux i386))
device = /dev/ttyUSB0:1 # Slot 1 SC8in1 or MCR 4/8 (Linux i386)

Attention: Counting begins with 0, that means number of device is one less than number of COM-Port! Eg ttyS0 = COM1, tts/1 = COM2.

[mirny]

Re: halp oscam

then in reader are additional options:
Smargopatch, SC8in1 DTR/RTS Patch,
Device Out Endpoint - 0x82 - Smargo+ or 0x81 - Infinity USB Smart
you'll easy find it in webif readers/edit reader at the bottom