Oscam stopped working when update to 1.10 from 0.99

[bigal666]

Hello friends.

I have oscam (version=0.99.4svn, build #2601, system=mips-tuxbox-linux, nice=-1) working as a proxy server to a CCcam 2.1.3 client. Everything works fine.

However i wanted to try new stable version of oscam (version=1.10rc-svn, build #5741, system=mips-tuxbox-linux, nice=-1)

And here started mi little hell. I cant make it works. i dont know if smtg very important change from 0.99 to 1.10 that i m not setting and create the caos.

In the CCcam client i get :
cam[0] ecm even nok caid:0x1810 id:0x0 pid:0x88b

nagra2 emu can't decode ecm (key: 1, ident: 0) no key

(however this not happen with oscam 0.99)


I was playing a lot with oscam.server, oscam.conf and oscam.user trying to find the magic click that makes everything working again... but i couldnt.
I also tried with other oscam builds as 6338 or 6414...(unstable)


Here are my conf files:

oscam.conf


[global]
usrfile = /var/log/oscam/oscamuser.log
logfile = /var/log/oscam/oscam.log
disablelog = 0
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2500
clientmaxidle = 120
cachedelay = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 50
waitforcards = 0
preferlocalcards = 0
saveinithistory = 0
readerrestartseconds = 5
readerautoloadbalance = 0
readerautoloadbalance_save = 0


[cccam]
port = 55555
reshare = 5
version = 2.1.3



[webif]
httpport = 9000
httpuser =
httppwd =
httpcss =
httptpl =
httpscript =
httprefresh = 10
httpallowed = 0.0.0.0-255.255.255.255
httpdyndns =
httphideidleclients = 1
httpreadonly = 0

[anticasc]
enabled = 0
numusers = 1
sampletime = 8
samples = 2
penalty = 0
aclogfile = /var/log/oscam/oscam_ac.log
denysamples = 1
fakedelay = 1000



oscam.server


[reader]
label = camserver
enable = 1
protocol = cccam
device = hostname,port
account = user,pass
services =
inactivitytimeout = 0
caid =
ident =
group = 1
#ecmcache = 1
lb_weight = 100
cccversion = 2.1.3
cccmaxhops = 4
cccwantemu = 1


oscam.user

[account]
user = mylocaluser
pwd = pass
group = 1
caid =
cccmaxhops = 3
cccreshare = 1
numusers = 1
penalty = 0
au = 1

And this is my oscam.log


2012/03/02 14:59:48 7784F000 s >> OSCam << cardserver started, version 1.10rc-svn, build #5741 (mips-tuxbox-linux)
2012/03/02 14:59:48 7784F000 s version=1.10rc-svn, build #5741, system=mips-tuxbox-linux, nice=-1
2012/03/02 14:59:48 7784F000 s client max. idle=120 sec, debug level=0
2012/03/02 14:59:48 7784F000 s max. logsize=50 Kb, loghistorysize=4096 bytes
2012/03/02 14:59:48 7784F000 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
2012/03/02 14:59:48 7784F000 s services reloaded: 0 services freed, 1 services loaded, rejected 0
2012/03/02 14:59:48 7784F000 s userdb reloaded: 4 accounts loaded, 0 expired, 0 disabled
2012/03/02 14:59:48 7784F000 s signal handling initialized (type=sysv)
2012/03/02 14:59:48 7784F000 s 813 service-id's loaded in 13ms
2012/03/02 14:59:48 7784F000 s 37 tier-id's loaded
2012/03/02 14:59:48 7784F000 s 802 provid's loaded
2012/03/02 14:59:48 7784F000 s monitor: initialized (fd=8, port=98
2012/03/02 14:59:48 7784F000 s camd33: disabled
2012/03/02 14:59:48 7784F000 s camd35: disabled
2012/03/02 14:59:48 7784F000 s cs378x: disabled
2012/03/02 14:59:48 7784F000 s newcamd: initialized (fd=9, port=22000, crypted)
2012/03/02 14:59:48 7784F000 s CAID: 183D
2012/03/02 14:59:48 7784F000 s provid #0: 005411
2012/03/02 14:59:48 7784F000 s newcamd: initialized (fd=10, port=21000, crypted)
2012/03/02 14:59:48 7784F000 s CAID: 093B
2012/03/02 14:59:48 7784F000 s provid #0: 000000
2012/03/02 14:59:48 7784F000 s cccam: initialized (fd=11, port=19730, crypted)
2012/03/02 14:59:48 7784F000 s radegast: disabled
2012/03/02 14:59:48 7784F000 s http thread started
2012/03/02 14:59:48 7784F000 s creating thread for device xx.xx.xx.xx.
2012/03/02 14:59:48 764EF4B0 h HTTP Server listening on port ***x
2012/03/02 14:59:48 7784F000 s creating thread for device xx.xx.xx.xx
2012/03/02 14:59:48 754EF4B0 p proxy thread started (thread=754EF4B0, label=camserver, server=xx.xx.xx.xx)
2012/03/02 14:59:48 7784F000 s anti cascading disabled

2012/03/02 14:59:52 72AFF4B0 c encrypted cccam-client 192.168.0.117 granted (mylocaluser, au=auto (1 reader)) ******************* (seems CCcam client connects properly....)


I ll apreciate any help or tip to head me in some direction to be able to find the problem.
Thanks a lot for your help.

[mirny]

Re: Oscam stopped working when update to 1.10 from 0.99

first thing it depend wich FW version and which Oscam build are you using.
when its dvbapi in old fw, it could not understand the new oscam dvbapi drivers.
always check wich version is suitable for wich oscam build.
other thing i see this
oscam.server

[reader]
account = user,pass

i think that in new build it should be like this
user =
password =

try it, and check last changelog on streamboard

[cisko]

Re: Oscam stopped working when update to 1.10 from 0.99

of course, in newer version user and password are split into two different config lines.

Second: have you tried to remove Cccam version info?

Last: I don't see dvbapi configuration in your oscam.config file

[mirny]

Re: Oscam stopped working when update to 1.10 from 0.99

Last: I don't see dvbapi configuration in your oscam.config file

it is not necessary in this case

[cisko]

Re: Oscam stopped working when update to 1.10 from 0.99

it is not necessary in this case

But also without dvbapi is it possible to descramble channels?

[mirny]

Re: Oscam stopped working when update to 1.10 from 0.99

sure you need to use dvbapi, when you want watch a channel on your receiver.
but he has problem with connectivity as i red. that problem with marks.
and when you replying straight to my post, you don't need to use quote.