newcamd525

[Sotrue]

Hi All,

Im currently investigate my sub options, and have found a site where is is asking me to select which emu. The default option is newcamd525. Is the 525 just the version number?

I have a skybox F5, but my dish isnt up yet, so haven't powered it up, but i know mydads uses newcamd, i was just wondering why there was 525 at the end.

Thanks for being patient with a newbie

[aplok]

Re: newcamd525

i do'nt know about newcamd525 , ...

however i can tell you in the meantime newcam threads are here

Satlover Forums > CardSharing Servers Exchange > Exchange In Other protocols

__http://www.satlover.eu/forum/newcamd-exchange/

so you can read some interesting paper ...

---

also just have a look on

__http://www.satlover.eu/forum/index.php

... plenty of interesting things !

that have been solved before

[Sotrue]

Re: newcamd525

i do'nt know about newcamd525 , ...

however i can tell you in the meantime newcam threads are here

Satlover Forums > CardSharing Servers Exchange > Exchange In Other protocols

__http://www.satlover.eu/forum/newcamd-exchange/

so you can read some interesting paper ...

---

also just have a look on

__http://www.satlover.eu/forum/index.php

... plenty of interesting things !

that have been solved before

Please don't spam my posts, this is 2 you have responded 2 now with information which is irrelevant to my original question. It is not helpful.

However, i appreciate you may be trying. But in your first line you have stated you do not know anything about newcamd525, therefore you cannot answer my question.

Regards
Donna

[gianni253]

Re: newcamd525

Hi All,

.... The default option is newcamd525. Is the 525 just the version number?

Right mate, 5.25 is the version number.
This requirement about release may be related to system stability or compatibility

[kalpikos]

Re: newcamd525

The most supported cams by the servers are cccam and mgcamd.
The same is for the most receivers.
Be sure that your box supports newcamd.
I can confirm that Newcamd.5.25 is a version of this cam.

If you have the choise to select which cam you want, sellect either cccam or mgcamd.
Remember that mgcamd supports N lines in newcamd.list.
But I don't know if your receiver supports pure mgcamd.

[bonilla]

Re: newcamd525

Hello,
for your complete information ,here you have a changelog to see what is new on the 5.25 version

History since 5.2 (not before, it was too long )

newcamd v5.25
newcamd: tpscrypt2 - you need a new libcrypto.so.0.9.7, available in this
archive, if you do not upgrade libcrypto.so.0.9.7, newcamd will crash when
trying to decrypt Tps
all binaries: protocol change (for details see protocol.txt) for future
enhancements, please switch all binaries at once to their new versions
newcamd, cardserver, cardspider, betad, radegast, camdcmd

newcamd v5.24
newcamd: 0065 9x table

newcamd v5.23 - DMM 500 edition
newcamd: add DM500 BOX_TYPE to config
cardserver: to use the internal slot, set SERIAL_PORT = 1 in cardserv.cfg

newcamd v5.22
all binaries: added keep alive pings for card client<->server connections
add CWS_KEEPALIVE = yes to newcamd.conf or cardspider.cfg to use it
if you use it, remember that all binaries must be updated to v5.22 versions
add dyndnscd - a small dyndns client to run on dbox2/Dreambox if your router
doesn't have one
betad: reenable Dreamcrypt support

newcamd v5.21
cardspider: add info about the number of user and peers your neighbouring nodes
have, this is a protocol change, all nodes within a network must be updated at
the same time

newcamd v5.20a
cardserver: fix a bug in Irdeto init

newcamd v5.20
newcamd: fix Polsat AU
cardspider: add SID_SCAN_PORT option, see cardspider/cardspider.cfg for details

[Sotrue]

Re: newcamd525

Hi Guys,

apologies for the delayed response, its been a busy weekend. Anyway, as a follow up question to my original post, if you had to choose a protocol between Newcamd525 and Camd3, which would you choose? Are there any major performance differences?
Regards
Donna

[bakfitty]

Re: newcamd525

Hi Guys,

apologies for the delayed response, its been a busy weekend. Anyway, as a follow up question to my original post, if you had to choose a protocol between Newcamd525 and Camd3, which would you choose? Are there any major performance differences?
Regards
Donna

Hello Donna,

Personally, I would choose c*md3. I explain you the differences.The difference between ca*d3 and new**md5.25 protocols is as follows:
-ca*d3 uses 1 port for all subscriptions (packages)
-newca*d uses different ports, each for particular package.

If my post was useful to you, please prush 'thanks' button.

[Sotrue]

Re: newcamd525

Hi Bakfitty,

Which emu should i use with camd3? I'm going to be using a skybox f5 initially.

Regards
Donna

[gianni253]

Re: newcamd525

Hi Guys,

apologies for the delayed response, its been a busy weekend. Anyway, as a follow up question to my original post, if you had to choose a protocol between Newcamd525 and Camd3, which would you choose? Are there any major performance differences?
Regards
Donna

Newcamd is an encrypted protocol and generally based on tcp/ip.
Camd is unencrypted and generally based on udp.
In few words:
Newcamd is more safe (because encrypted) and reliable (because tcp/ip architecture, in case of packet loss, will assure a retransmission), but slower.
Camd is faster but, but a packet loss will result in a freeze that will last until next ecm request is sent.
If you are in a wan environment, no doubt newcamd should be preferred.

[Sotrue]

Re: newcamd525

So i should opt for the Newcamd protocol as my box will be wired into my router? Opinions please

[bakfitty]

Re: newcamd525

So i should opt for the Newcamd protocol as my box will be wired into my router? Opinions please

Hello,

I know I voted for another protocol last time but I think in your case newc*md can be an ideal choice as gianni253 said in previous post. Try to get a test l*ne and you will be able to check how your box works with newc*amd.

If my post was useful to you, please push 'thanks' button.

[Sotrue]

Re: newcamd525

Thats what i was thinking bakfitty, i will have a play about and post my findings just incase anyone else is having the same dilemma.

[gianni253]

Re: newcamd525

So i should opt for the Newcamd protocol as my box will be wired into my router? Opinions please

Newcamd is the best choice.
Just for fun, you can always try camd ... you will note an improvement of a few milliseconds in ecm time but, every now and then you will experience some freezes that last many seconds (the time for a new ecm to come).

[pan1300]

Re: newcamd525

hi Sotrue

I suggest you give it a try with both and look for some testlines (start in the satlover forum for clines).

As @bakfitty said:
- cccam has 1 port for all packages (personally I find this the easiest and best solution)
- newcamd in general has 1 port for each packages, but - without having tried myself - it seems it's possible to have nlines for more than 1 package.