Re-share N-line on Dreambox

[MLAZN]

Re: Re-share N-line on Dreambox

Hi mate

Your settings seems to be ok.

"yes" or "no" means that you want or not to use the emu's from the other box.

Thanks kalpikos.

With the c-line that I enter in the 2nd box, do I put the ip of my 1st dreambox? or my pc ip? or the router ip?

I got it working now
But there's 1 problem.... I can only open afew channels. The rest won't open in my 2nd box but works fine in my 1st box... Strange...

Anyone know how to fix it?

Thanks

Update :
I deleted the number 2 and 3 at the end of the n-line and all channels is working
I'm so happy!

[Bazinga]

Re: Re-share N-line on Dreambox

hi kalpikos

is that correct, if you add an N-Line without adding the "2 3" at the end, it can't be reshared?

becuase I want to use an N-line for my own viewing and not for resharing while I use my other C-Lines and reshare them.

Dear digicon, you describe how can be shared a C-line
but out friend wants to reshare a N-line from cccam.

so, dear Zsoltiy you have to:

change the N from
N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14
to
N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 2 3

and give this C-lne to other (client)

C: your_dns your_port user pass yes

[aplok]

Re: Re-share N-line on Dreambox

yes, i found the nline syntax:

# syntax for N: to add newcamd server connection
#
# N: <ip> <port> <username> <pass> <des(14byte)> <nr_of_hops_away (default: 1)> <stealth mode (default: 0)>
#
# where
# stealth modes: 0 = disabled, 1 = mgcamd new, 2 = mgcamd old, 3 = evocamd, 4 = generic
#

hence
N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 2 3

defines a nline access whith:
- with nr_of_hops_away=2
- and stealth_mode=evocamd

[Bazinga]

Re: Re-share N-line on Dreambox

Hi

If I put nr_of_hops_away as high as possible (lets say 10 hops away), configure the F-Line so they can only take shares from less than 5 hops away. will that prevent the N-line being reshared?

yes, i found the nline syntax:

# syntax for N: to add newcamd server connection
#
# N: <ip> <port> <username> <pass> <des(14byte)> <nr_of_hops_away (default: 1)> <stealth mode (default: 0)>
#
# where
# stealth modes: 0 = disabled, 1 = mgcamd new, 2 = mgcamd old, 3 = evocamd, 4 = generic
#

hence
N: 127.0.0.1 10000 dummy dummy 01 02 03 04 05 06 07 08 09 10 11 12 13 14 2 3

defines a nline access whith:
- with nr_of_hops_away=2
- and stealth_mode=evocamd

[aplok]

Re: Re-share N-line on Dreambox

... put nr_of_hops_away as high as possible (lets say 10 hops away),

i do'nt known in pasadena,
but here, in cccam land,

nr_of_hops_away > 3

becomes dominant factor for freezing ...

[Bazinga]

Re: Re-share N-line on Dreambox

i do'nt known in pasadena,
but here, in cccam land,

nr_of_hops_away > 3

becomes dominant factor for freezing ...

So how would you make an N-Line in Cccam.cfg for own viewing and not for resharing?

i do'nt known in pasadena,
but here, in cccam land,

nr_of_hops_away > 3

becomes dominant factor for freezing ...

btw I believe thats only faking the hops?

[aplok]

Re: Re-share N-line on Dreambox

So how would you make an N-Line in Cccam.cfg for own viewing and not for resharing?

try this:

nr_of_hops_away = 0

should do the trick

[Bazinga]

Re: Re-share N-line on Dreambox

try this:

nr_of_hops_away = 0

should do the trick

are you 100% sure, then it will make it look like its my local card?

or are you make stuff up to increase your post count?

[aplok]

Re: Re-share N-line on Dreambox

why do'nt you try it, and let us know about this idea

[Bazinga]

Re: Re-share N-line on Dreambox

why do'nt you try it, and let us know about this idea

I can't try, I could loose my N-Line by getting banned.

[aplok]

Re: Re-share N-line on Dreambox

I can't try, I could loose my N-Line by getting banned.

okayyyy

are you 100% sure

... only after successful tests with the same cccam version

then it will make it look like its my local card

... but how do you see that

[Bazinga]

Re: Re-share N-line on Dreambox

okayyyy


... only after successful tests with the same cccam version


... but how do you see that

well it still shows 1 hops on my infobar, if I had the 0 to indicate 0 hops.

with the old 256 trick, it use to show 0 hops, meaning local (with latest cccam, 256 trick shows as 10 hops)

so I can only test it if its confirmed, otherwise I could get banned N-Line.