cccam.prio optimized for satlover

[anisbh]

Re: cccam.prio optimized for satlover

yes i can see the efficacity of your Prio with Csat

thx for this file

[seb131]

Re: cccam.prio optimized for satlover

Hi,

this one will work much more better (tested ok with satlover servers) :
- ABSat and Csat via cards first, nagra/seca3 used only for HD or if via not found
- added provider 003317 ignored

[URL="http://www.zshare.net/info.html?80805833-73e32504fc1b5194c22e1ae234a47785"]http://w.zshare.net/info.html?80805833-73e32504fc1b5194c22e1ae234a47785[/URL]

[runmo]

Re: cccam.prio optimized for satlover

I'll try it out Seb, well done job!!!!
I tested your firstr cccam.prio with server 2 yesterday night.
France 2 HD worked

regards
runmo

Hi,

this one will work much more better (tested ok with satlover servers) :
- ABSat and Csat via cards first, nagra/seca3 used only for HD or if via not found
- added provider 003317 ignored

[URL="http://www.zshare.net/info.html?80805833-73e32504fc1b5194c22e1ae234a47785"]http://w.zshare.net/info.html?80805833-73e32504fc1b5194c22e1ae234a47785[/URL]

Hi again,

Seb, I tested your cccam.prio from 26/9/2010 with canal+ France/canalsat (france 2 HD and TF1 HD, M6 HD, 13E rue HD, canal+ sport HD, canal+ HD, cine premier HD) with server 1, channels opened
Compared to yesterday, all normal channels from canal+ France opened today with server 1 from Satlover. And with your latest.cccam.prio also the HD channels. It takes some more seconds to open but at this time it works.
Great job, thx very much!!!

other info : to be able to open CYFRA channels on Hotbird 13E, do this in your prio file (found this on page 2 from this treat), I've tested it with server 2 and without doing this and using prio, channels won't open from Bouquet Cyfra

So to do if using cccam.prio :
open prio file and delete or make a # in front of this line
I: 0100:000068 # Cyfra(NotActive)
Cyfra use seca and caid 0068


QUESTION @ Seb :
Channels from TELESAT (RTL TVI, LA UNE, LA DEUX, PLUG RTL, CLUB RTL) won't open with your cccam.prio. Without your prio they open, but only with c-lines from SERVER 4 from SATLOVER. At this moment it won't open with servers 1 and 2, pitty enough.
It are FRENCH BELGIAN mpeg4 channels (HD) you will like to I think on Hotbird 13E
Could you test this channels with your prio please. I suppose there must be one or more lines where a # must be put as for example with Cyfra before the I: 0100:000068
in the prio. Myself I don't understand what to do in the prio to solve problem.
Thank you for testing out.

regards
µrunmo

[seb131]

Re: cccam.prio optimized for satlover

other info : to be able to open CYFRA channels on Hotbird 13E, do this in your prio file (found this on page 2 from this treat), I've tested it with server 2 and without doing this and using prio, channels won't open from Bouquet Cyfra

So to do if using cccam.prio :
open prio file and delete or make a # in front of this line
I: 0100:000068 # Cyfra(NotActive)
Cyfra use seca and caid 0068


QUESTION @ Seb :
Channels from TELESAT (RTL TVI, LA UNE, LA DEUX, PLUG RTL, CLUB RTL) won't open with your cccam.prio. Without your prio they open, but only with c-lines from SERVER 4 from SATLOVER. At this moment it won't open with servers 1 and 2, pitty enough.
It are FRENCH BELGIAN mpeg4 channels (HD) you will like to I think on Hotbird 13E
Could you test this channels with your prio please. I suppose there must be one or more lines where a # must be put as for example with Cyfra before the I: 0100:000068
in the prio. Myself I don't understand what to do in the prio to solve problem.
Thank you for testing out.

regards
µrunmo

Cyfra implemented.
Normally Belgium should work now. Test and tell if it is okay

[runmo]

Re: cccam.prio optimized for satlover

Cyfra implemented.
Normally Belgium should work now. Test and tell if it is okay

With the latest cccam.prio from Seb131 :

CYFRA on Hotbird 13E working with cccam.prio
TELESAT BELGIUM on Hotbird 13E working with cccam.prio now, but only with server 4 at this time.
Servers 1 and 2 won't open TELESAT BELGIUM channels at this moment.
I've posted that Telesat problem a few times in server status in other subforum on Satovers.

@ Seb131 : Wonderfull job, thx a lot for your help and work on the cccam.prio!!
Is there a way to open nova channels faster with the prio?
With servers 1 and 2 it's the working bouquet that opens the slowest off all working bouquets with both servers.

regards
runmo

ps : To the people that use (or will use) the improved cccam.prio from Seb131, let's all thank him for his work on the cccam.prio, thx guys

[seb131]

Re: cccam.prio optimized for satlover

unfortunately, nova is only available in one system. By the way, the prio won't change anything. If nova is available in several server, and if one is working better, you can ignore nova on all the cline at the end of the line between brakets), except the one of this server.

[seb131]

Re: cccam.prio optimized for satlover

Of course I can ! but tell me first which bouquet is not working properly, and I will check.
Cheers
seb

[seb131]

Re: cccam.prio optimized for satlover

Note: Nova issue is well known and is due to the anti-sharing capability implemented in the card (invalid ECM answers after 4 correctly answered in a same time period)

[Resident]

Re: cccam.prio optimized for satlover

Seb, I love you too!

What I really need is DigiTV and UPC on 1W.

[runmo]

Re: cccam.prio optimized for satlover

Give the man some time
I'm sure Seb will find a way to help with your request

@ seb : thx for the info about Nova

regards
runmo

[seb131]

Re: cccam.prio optimized for satlover

Seb, I love you too!

What I really need is DigiTV and UPC on 1W.

Hi, I don't have 1W.
I will check these provider, but perhaps it won't be correct at the first try and I will need your support.

Cheers
Seb

Hi

try this one. I have added the new digiTv card id.

Please, check also this thread and tell me which prio file is the best and what are the differences :

http://www.satlover.com/forum/cccam/14217-cccam-prio.html

cheers
seb

[runmo]

Re: cccam.prio optimized for satlover

Hi, I don't have 1W.
I will check these provider, but perhaps it won't be correct at the first try and I will need your support.

Cheers
Seb

Hi

try this one. I have added the new digiTv card id.

Please, check also this thread and tell me which prio file is the best and what are the differences :

http://www.satlover.com/forum/cccam/14217-cccam-prio.html

cheers
seb

Botch cccam.prio's are working well.
But maybe it would be easier to work on one cccam.prio in the futur? This maybe could give lesser work (less time needed) to Seb and Juventino, the persons that adapt the cccam.prios. I guess Seb and Juventino can contact each other to see what's the easiest and fastest way
Anyway, great work!!! THX

regards
runmo

[seb131]

Re: cccam.prio optimized for satlover

perhaps a sticky post could be usefull in order to keep only one file and to update it according to satlover servers specificities

[mustafatemiz]

Re: cccam.prio optimized for satlover

hangi kanalları açıyor?

[seb131]

Re: cccam.prio optimized for satlover

Dorcel and PrivateSpice added in prio