Cccam freeze with premium CLine

[breweryfr]

Re: Cccam freeze with premium CLine

I just wanted to say, I use only vip-servers when the ping response was by far better.
EMM time is still variable up to 6sec, and freezes reduced.

In some situation I had to restart manually the Cccam to get the picture.
Now my DBOX is blocked with a message on TV "please wait for the softcam restart".
That could be the source of the problem.

I can ping the vip-server with 30ms.
Nothing special appears with top command. CPU at 1%...

Here is the content of messages:
/var/volatile/log/messages

Apr 16 22:37:50 vusolo2 user.warn kernel: [VID]: VIDEO_STOP 1 1
Apr 16 22:37:50 vusolo2 user.warn kernel: [AUD]: AUDIO_STOP 6503216
Apr 16 22:37:50 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE 6503216 0 aph=0x0
Apr 16 22:37:50 vusolo2 user.warn kernel: [AUD]: AUDIO_CONTINUE aph=0 0 0
Apr 16 22:41:12 vusolo2 user.notice kernel: nfs: server 192.168.12.14 not responding, still trying
Apr 16 22:42:52 vusolo2 auth.info login[767]: root login on 'pts/0'

Where the nfs: server is a NAS I shutdown. I didn't use it for recording or reading a file.

[skytec]

Re: Cccam freeze with premium CLine

Yes in ecm.info the ecm time is 0.609s = 609ms.

For N*D*S you need ECM time < 599ms.
ECM time > 600ms = freezing

[kalpikos]

Re: Cccam freeze with premium CLine

Hi breweryfr

I can't understand these errors that you get
but I think that it's not normal.

Maybe it's better to flash your box and install again the cccam.
Use the latest version of openpli and the 2.3.0 version of cccam.

[Triad]

Re: Cccam freeze with premium CLine

For N*D*S you need ECM time < 599ms.
ECM time > 600ms = freezing

Is it general N*S response time or is it just for SkyUK, interested to know does new NDS version like Total TV has lower ecm requests or the same 600ms?

[breweryfr]

Re: Cccam freeze with premium CLine

Now I'm back after some tests:
1. I did a new OpenPli install with Cccam & Oscam
--> With no success

2. I switch for an BlackHole image with Cccam / Oscam
--> After 1 day of running, my Vu+ stopped with a crash log.

3. I switched to the latest VTI+ v6.0.8 with Cccam 2.3
And seems to be better.
Freezes still continue but no more than a few seconds instead of 30 seconds I had previously.



As you guys advised me, the oscam is a better choice for setting optimization.

Here is my working Oscam.server file

[reader]
label=my server
enable=1
protocol=cccam
device=myserver,port
user=**********
password=******************
cccwantemu=0
cccversion=2.1.2
group=1
inactivitytimeout=30
reconnecttimeout=30
lb_weight=100
cccversion=2.1.2
cccmaxhops=10
cccwantemu=1
ccckeepalive=1