Can CCcam query multiples C-lines at the same time?

[lingo74]

Hi,

I have multiple C-lines from different CCcam servers.

Now CCcam seems to be only using one thread to query one server/C-line for each request.

Is it possible to make CCcam to run multithreading so it can query multiple servers for each request?

[abrarshah]

Re: Can CCcam query multiples C-lines at the same time?

if i use more than one cline on my reciever from different servers ,
will performance of receiver be affected or not??
if yes!! then which effects i may face

[kalpikos]

Re: Can CCcam query multiples C-lines at the same time?

Hi,

I have multiple C-lines from different CCcam servers.

Now CCcam seems to be only using one thread to query one server/C-line for each request.

Is it possible to make CCcam to run multithreading so it can query multiple servers for each request?

I can't understand exactly what do mean, but you must know that all lines into a cccam.cfg run together.
On the other hand, if you want, you can use more than one cccam.cfg, but you can run only one each time.

There is a plugin called CCcam Config Switcher.
You can create many CCcam configs ...
CCcam_0.cfg
CCcam_1.cfg
CCcam_2.cfg
and then ftp them back to /etc and run the plugin.

if i use more than one cline on my reciever from different servers ,
will performance of receiver be affected or not??
if yes!! then which effects i may face

Yes...
You will have better results, because if the first c-line failed to answer the request the cccam go to next line etc
Don't use too many lines together because the performances will be slowed.

[lingo74]

Re: Can CCcam query multiples C-lines at the same time?

I want it to send out the ECM request to several C-lines/servers for each ECM request and use the response it first get.

But I guess CCcam does not support this, does anyone know if any other cardsharing emulators allows this?

I read that Hadu CCcam plugin support this, but I want the same feature on my Dreambox.
Or any other PC/Linux cardsharing emulator that support this and is able to reshare it to my Dreambox.

[kalpikos]

Re: Can CCcam query multiples C-lines at the same time?

Dear lingo74

If you like something more than cccam, you can use oscam.
Oscam has more abilities than cccam and also can be using for sharing, but it's a little complicated and you have to read a lot before you start.
There is a section on this forum, where you can find more infos.
-http://www.satlover.eu/forum/oscam/

[foxy6800]

Re: Can CCcam query multiples C-lines at the same time?

On what king of intervals do emulators need to apply the codes?
I mean how often the decrypting of a channel happens lets say in one minute?

[Teranoz]

Re: Can CCcam query multiples C-lines at the same time?

You can test it by finding a cline that is stable and if its stable long enough remove the network-cable and start the stopwatch. My guess would be 1 or 2 times per minute.

Something else you might also want to do is setting up a line per provider.
If you have 5 different servers that have the same packages you can tell line 1 to use only package A from server 1, package B from server 2 and so on.
(but do not use this with the satlover free lines from the same server !!!)

[kalpikos]

Re: Can CCcam query multiples C-lines at the same time?

On what king of intervals do emulators need to apply the codes?
I mean how often the decrypting of a channel happens lets say in one minute?

Obviously you mean the change of the keys of a decrypt channel...

If so, this depends on the encryption.
There are some encryptions that change the keys in a very small interval, maybe every 10 sec, but there are other providers using encryption that change the keys every min or even rarely.

[aplok]

Re: Can CCcam query multiples C-lines at the same time?

On what king of intervals do emulators need to apply the codes?
I mean how often the decrypting of a channel happens lets say in one minute?

this is an excellent issue to get trained with a network packet monitoring tool for each of your cccam.server

Notable packet analyzers
For a more comprehensive list, see Comparison of packet analyzers.

__http://en.wikipedia.org/wiki/Packet_analyzer

Capsa Network Analyzer
Cain and Abel
Carnivore (FBI)
dSniff
ettercap
Fiddler
Lanmeter
Microsoft Network Monitor
NarusInsight
NetScout Systems nGenius Infinistream
ngrep, Network Grep
SkyGrabber
snoop
tcpdump
Wireshark (formerly known as Ethereal)

[foxy6800]

Re: Can CCcam query multiples C-lines at the same time?

I have previously used Wireshark and familiar how to use it.
I will look into Packet analyzers.
Going back to the main question "Can CCcam query multiples C-lines at the same time?", the way I look at this is suppose you have one lock and several keys, at any instance you only can try one of the keys to unlock it.
Unless there is a way to configure which C-line to be used for which package at different interval, there is no use having lots of different c-lines.
But I could be wrong

[aplok]

Re: Can CCcam query multiples C-lines at the same time?

... Unless there is a way to configure which C-line to be used for which package at different interval, there is no use having lots of different c-lines.

... i am not sure to understand clearly what you mean ...

can you explain , please ?

[foxy6800]

Re: Can CCcam query multiples C-lines at the same time?

... i am not sure to understand clearly what you mean ...

can you explain , please ?

What I mean is, if you could specify the each package use a different CCcam.cfg file then you could have several different CCcam.cfg files, each with different Clines.
But to be honest I don't know how CCCam operates in details so I could be wrong!!??

[KVF1966]

Re: Can CCcam query multiples C-lines at the same time?

In the settings cccam can be only one file cccam.cfg

[kalpikos]

Re: Can CCcam query multiples C-lines at the same time?

In the settings cccam can be only one file cccam.cfg

No, mate
You can use more than one.

Depends on your receiver, you can use many cccam.cfg.
For example you can have cccam_1.cfg , cccam_2.cfg etc and from menu to choose which file you want to activate each time.
Of course you need a plugin called cccam-switch.

[herrr]

Re: Can CCcam query multiples C-lines at the same time?

What I mean is, if you could specify the each package use a different CCcam.cfg file then you could have several different CCcam.cfg files, each with different Clines.
But to be honest I don't know how CCCam operates in details so I could be wrong!!??

You can obtain this with proper syntax, written at the end of the lines (in the same cfg).
Example:
C: server1 port user pass no { 0:0:3, 0500:023800:0, 0500:040810:0, 0500:050800:0 }
C: server2 port user pass no { 0:0:0, 0500:023800:3, 0500:040810:3, 0500:050800:3 }
You get from server 1 all but not swiss TV, you get from server 2 nothing but swiss TV.