Dr Hd cccam error 0000 : ffff

[Phoenixx]

Hi all i have a brand new dr hd tripple and found v 211 p and ii was wonder if it is possible to get the cline working but editing from ubstick or manuel the cam will connect and gives 0000 :ffff and when i klick on conn i don see provider id.

The other option i can choose is newcamd but when i change it then the login has be ended.

This is mij Config ..

name: Connection_0
ip: *********
user: ******
password: ****** no { 0:0:3 }
protocol: cccam
deskey: 01 02 03 04 05 06 07 08 09 10 11 12 13 14
filtermode: user
filterindex: 0
port: 30382
timeout: 7
}

slot1 =
{
name: Connection_1
ip: ************
user: ******
password: ****** no { 0:0:3 }
protocol: cccam
deskey: 01 02 03 04 05 06 07 08 09 10 11 12 13 14
filtermode: user
filterindex: 0
port: 30384
timeout: 7
}

I can not change the ccam type or newcamd it`s closed soft ..

Any help is welcome.

[kalpikos]

Re: Dr Hd cccam error 0000 : ffff

Hi mate

I don't have your box , so I can't really help you ,
but I noticed something in the settings that you wrote...

password: ****** no { 0:0:3 }

Why you put the "no { 0:0:3 }" after the pass? Is this right?

[pan1300]

Re: Dr Hd cccam error 0000 : ffff

hi Phoenixx

@kalpikos is right: you musn't enter the 'C:' and the 'no { 0:0:3 }' - also most boxes are caps lock sensitive, and in some clines you need to enter an underscore '_'. Try with cccam instead of newcamd if you have a cline (cccam), no deskey needed.

[KVF1966]

Re: Dr Hd cccam error 0000 : ffff

This receiver in the presence of software with the letter "p" could run over cccam and shown above settings are probably correct, deskey in the settings should be, as stated in previous posts, the password is to try without no { 0:0:3 }

[Phoenixx]

Re: Dr Hd cccam error 0000 : ffff

Hi all
I am 2 steps further with the test of the dr hd box. I am remove the " no { 0:0:3 } " also for the reason that the no witout space comes to the pasword when i load the settings from usb to the dr hd box.
I was to quick with the connection because the green letters 0000:fffff are good. Later i was zapping to eutelsat 16 e and hotbird 13 e and i got picture .. it works!.. But .. some channals are freezing and the strange isseu is that when i load all settings form usb to the dr hd grand tripple box then the box reboots after a few seconds even when i first do a data reset to the box. Its only works when i add the adres manuelly with the remote to the box but with som freezing channels. I have earlier monitor the ecm times with the hd glass skin dj connectly from my old ( lo mem ) azbox a year ago and some emm times are 7000 mS but i have spec on sky lower ecm with 200 mS time and that`s not changeble. My inet is good 150 / 15 MB and connection also and the pingtime also so thats good.

The only thing what i can do is a stand alone pc with oscam to get the line in the readers and shar it LAN to my dr hd box. Th good thing about oscam is that he works as cachebuffer so the emm get the right way without freezing when all settings are good. It just for tuning, tweaking and testing the get the picture good on my brand new dr hd grand tripple box. firmware 211p is on a rus site and the downsite is that the stability of the box is lower then the orginal firmware 211 without softc ane k*ys.

[kalpikos]

Re: Dr Hd cccam error 0000 : ffff

I think that you are in a wrong way

You have just buy a new receiver and you say that you will use your pc as oscam server for sharing a c-line in your lan ???
You don't need to use oscam... You need only your box and nothing more.
Try to find why you have freezings.
Is it you box? , is it the c-line? , is it your connection?

Moreover you are planning something that for most servers is illegal, so be careful.

[Phoenixx]

Re: Dr Hd cccam error 0000 : ffff

My i net is good its in the box and yes it is my box, i think that the speed of the cam is lower then the speed of the dream 7020HD and a can`t load the inbuild cs menu from usb stick to the box because the settings are good but the box reboot with 10 sec several times and get unstable..

[kalpikos]

Re: Dr Hd cccam error 0000 : ffff

May be you should try an older version of firmware.
If you still have problem, maybe your receiver has a hardware malfunction because it's not normal for a new receiver to reboot by it sefl.
If you have guarantee, you can use it and return it back.

[mahrkpat]

Re: Dr Hd cccam error 0000 : ffff

The reboot might be caused by the cccam not working properly and by locking
up may cause receiver to reboot.