black screen whit cccam 2.3.0

[terremoto]

hi at all i have the immagine dream elite 4.0 rev 4 o.e 2.0 and i have the black screen whit cccam 2.3.0 in the ccaminfo i see my server is green and is ok but my screen is black !!! why??? thnak you

[bakfitty]

Re: black screen whit cccam 2.3.0

hi at all i have the immagine dream elite 4.0 rev 4 o.e 2.0 and i have the black screen whit cccam 2.3.0 in the ccaminfo i see my server is green and is ok but my screen is black !!! why??? thnak you

Hi mate,

Probably there is something wrong with the server settings or the server that you use is not very good. Maybe try another server and check if it happens the same or not.

If my post was useful to you, please push 'thanks' button.

[aplok]

Re: black screen whit cccam 2.3.0

try to monitor your sat rcvr with telnet command ..

from your pc, type

telnet boxip

root
pw


then list the process

$ ps

then feed back please ...

[Satphoenix]

Re: black screen whit cccam 2.3.0

...i have the black screen whit cccam 2.3.0 in the ccaminfo i see my server is green and is ok ...

If the problem is your cccam:
Try to downgrade to cccam ver. 2.21 or even 2.011
Vers. 2.30 sometimes has problems with several software versions on different receivers.
What does the cccam-webinterface say about your server?

[BlueIsMyColor]

Re: black screen whit cccam 2.3.0

That server have the card to open what you want?

regards

[kalpikos]

Re: black screen whit cccam 2.3.0

hi at all i have the immagine dream elite 4.0 rev 4 o.e 2.0 and i have the black screen whit cccam 2.3.0 in the ccaminfo i see my server is green and is ok but my screen is black !!! why??? thnak you

Hi mate

You can try an older version of cccam as 2.2.1.
You have nothing to earn using the 2.3.0 version.
The problem is causing from the server you are using.
Probably is needed to be changed some settings in order to work without any problem.

Don't worry, use cccam and you will be ok.

[aplok]

Re: black screen whit cccam 2.3.0

... You can try an older version of cccam as 2.2.1.

what advantage do we have to use cccam 2.2.1,
to talk with cccam server with version 2.0.11 or even 2.1.4 ?

thx

[Satphoenix]

Re: black screen whit cccam 2.3.0

what advantage do we have to use cccam 2.2.1,
to talk with cccam server with version 2.0.11 or even 2.1.4?

No advantage, you can use 2.011 as client with no problems with a 2.14 server.
Sometimes it seems that 2.30 is a bit overloaded in comunication with the receiver software so it sometimes causes problems. 2.011 seems to be a bit faster.

[BlueIsMyColor]

Re: black screen whit cccam 2.3.0

Do you think the 2.0.11 version have advantage over the other versions, as client? Why?

regards

[aplok]

Re: black screen whit cccam 2.3.0

hi

the cccam contest: 2.0.10, 2.0.11, 2.1.4, 2.2.1 and 2.3.0 issue
is forked to

__http://www.satlover.eu/forum/cccam/50309-cccam-contest-2-0-10-2-0-11-2-1-4-2-2-1-and-2-3-0-a.html#post285569

thx

[sjamesamuel]

Re: black screen whit cccam 2.3.0

what advantage do we have to use cccam 2.2.1,
to talk with cccam server with version 2.0.11 or even 2.1.4 ?

thx

I have noticed that cccam 2.2.1 is somewhat faster in decrypting channels than 2.0.11 and 2.1.4 for some providers. But they all open the same channels.

[Satphoenix]

Re: black screen whit cccam 2.3.0

In older receivers (e.g. old DBOX2) it is recommended to use Vers. 2.011. The other (newer) versions don't really work there.
In newer receivers many online updates only offer 2.30 or 2.21. On my new receiver I downgraded from 2.30 to 2.21 and have better results (less wrong answers, which are declared as correct answers in webinterface).

[sjamesamuel]

Re: black screen whit cccam 2.3.0

On my new receiver I downgraded from 2.30 to 2.21 and have better results (less wrong answers, which are declared as correct answers in webinterface).

Would you please explain what do you mean by wrong and correct answers?

[Satphoenix]

Re: black screen whit cccam 2.3.0

Sometimes I receive an answer to an ecm which seems to be wrong, so I have a blackscreen for ~6 or 7 seconds (untill the cw changes again). The webinterface (servers) says that everything was ok, e. g. 100 (100), which means 100 requests and 100 correct answers, but sometimes the video has stopped for a cw-change periode in this 100 ecm request time.

[gianni253]

Re: black screen whit cccam 2.3.0

hi at all i have the immagine dream elite 4.0 rev 4 o.e 2.0 and i have the black screen whit cccam 2.3.0 in the ccaminfo i see my server is green and is ok but my screen is black !!! why??? thnak you

Considering that:
- ccc*am is running fine (you can connect via cccaminfo)
- network is ok (you can see server green)
as many other already said, a little downgrade might help