What is wrong with my ccam

[herrr]

Re: What is wrong with my ccam

If it's neutral, it's neutral...I mean the application runs only in your pc and ping the server...
If on the contrary it's not, it's not...I don't like relativism, that's tech, not philosophy.
A good survey is needed and maybe a point by Mr. Satlover (also about testing multiple lines of his servers).

[Mobley3]

Re: What is wrong with my ccam

To my knowledge any program that is available to test lines puts them out there for anyone who can be bothered to see and use them. I may be completely wrong on this and if so I apologize and stand to be corrected. On the other hand I cannot see what is so difficult to insert a few different lines manually or by cfg.

Regards Mobley3

[kostiav]

Re: What is wrong with my ccam

Yes you're right, the problem was is in quality of line. I've found another cardsharing site and bought test line from them, some of the channels unlocked immediately, but not all them. Then I try free line from satlover forum or from another sites, when never work for me. I'm always using just one line. So you are right, I need to find out a decent line supplier. Also I do have some questions, as I'm new in all of this:

1. If I'm using current line, anyone else able to use or not?
2. What sat's and packages are being unlocked by free satlover forum lines, as if I'm interested in particular sat and package, maybe it's not appropriate for me? As usually it says, what line what package and sat will open.
3. Has anyone considered using newcamd against cccam, I've read that it's more reliable and without freez as well.
4. If I want to unlock complete sat for example 4.8 E Sirius, does any lines exist for it, can I buy get it? As I've mentioned not all the channels unlocked, maybe it's because of frequency?

maybe just maybe the links are dead our the server is slooow,i had the same problems i solved the problem by getting a decent server all working perfectly now.best to shop around.
regards
ricardo

1. Yes I do have 2 cam's which is common interface and cccam, I'm selecting cccam and make it default. Tried loads of clines from free section, maybe they does not suit to open my sat?

2. I've downloaded cccam.cfg from the box via ftp, deleted everything and put line in it. Yes It's where exactly it is.

As I've mentioned earlier the problem is with the line, you can't have for free and quality unfortunately. I know how you guys work hard for us, to get this lines, but they don't work for me, I don't know about others.

Server 3 was updated this afternoon, so try another single line in your cfg file.

1. Have you made CCcam the default cam and activated it (go to Blue Panel, select cccam, press ok) ?

2. Where did you copy your cfg file to? It needs to be /etc/CCcam.cfg (with the upper-case letters, not as you've written it).

Yes unfortunately only satlover does not work, test line for 1 quid from another service works.

I don't understand: only satlover is not working or also other also lines?

[herrr]

Re: What is wrong with my ccam

1. If I'm using current line, anyone else able to use or not?
2. What sat's and packages are being unlocked by free satlover forum lines, as if I'm interested in particular sat and package, maybe it's not appropriate for me? As usually it says, what line what package and sat will open.
3. Has anyone considered using newcamd against cccam, I've read that it's more reliable and without freez as well.
4. If I want to unlock complete sat for example 4.8 E Sirius, does any lines exist for it, can I buy get it? As I've mentioned not all the channels unlocked, maybe it's because of frequency?

OK: let's back to our friend's problems:
1. No: the correct use is only for one client. Correct use...but when a lot of people try to use the same line, like it happens with free lines, sometimes, with lighter clients, like flycccam, it's possible to make it work for more than one person... (of course not for hard job, like ND* of SK*).
2. It depends from online cards, you have to take a look with your interface (browser).
3. This is not a good point...don't know where did you read it, but there is not a better one between this two (and I must say I don't like newcamd).
4. That's a good point: you have to inform yourself about it, before buying

[kostiav]

Re: What is wrong with my ccam

What is the name of the program for checking c lines?

My advice never use websites to test clines, this is how clines from this site is shown to non members and so the servers get overloaded bad for us all.

2. What do you mean, where and what I need to check?

OK: let's back to our friend's problems:
1. No: the correct use is only for one client. Correct use...but when a lot of people try to use the same line, like it happens with free lines, sometimes, with lighter clients, like flycccam, it's possible to make it work for more than one person... (of course not for hard job, like ND* of SK*).
2. It depends from online cards, you have to take a look with your interface (browser).
3. This is not a good point...don't know where did you read it, but there is not a better one between this two (and I must say I don't like newcamd).
4. That's a good point: you have to inform yourself about it, before buying

[herrr]

Re: What is wrong with my ccam

I don't know Vu+ duo very well, but CCcam has a visual interface, where you can see servers and cards connected.
If you don't know where to start it in your box, try to read some manuals, or perhaps somebody will explain it to you here...

[cisko]

Re: What is wrong with my ccam

Yes you're right, the problem was is in quality of line. I've found another cardsharing site and bought test line from them, some of the channels unlocked immediately, but not all them.

Have you check your cccam.prio file?
Check priority and caid insert, probably you have standard cofiguration like:

P: caid1
P: caid2
P: caid3
.
.
.
.
P: caidx
I: 0 #ignore all not listed before

Obviously if there's no "P: caid" lines with caids of your interest you have that problem.

[kostiav]

Re: What is wrong with my ccam

Unfortunately I can't see .prio at all at etc/var. Can you share yours with me?

Have you check your cccam.prio file?
Check priority and caid insert, probably you have standard cofiguration like:

P: caid1
P: caid2
P: caid3
.
.
.
.
P: caidx
I: 0 #ignore all not listed before

Obviously if there's no "P: caid" lines with caids of your interest you have that problem.

[herrr]

Re: What is wrong with my ccam

Unfortunately I can't see .prio at all at etc/var. Can you share yours with me?

prio are something strictly personal...I don't know if you and cisko watch the same channels, using the same servers...and I don't think mine (very few and very particular) fit you...
As a matter of facts you can find also prio on web in forums, but you have to use them only if they fit you

[kostiav]

Re: What is wrong with my ccam

Ok if they don't fit me, can I get some required information about what I watch and manually create that file? Probably we're not watching the same channels, that's very personal as you said.

prio are something strictly personal...I don't know if you and cisko watch the same channels, using the same servers...and I don't think mine (very few and very particular) fit you...
As a matter of facts you can find also prio on web in forums, but you have to use them only if they fit you

[herrr]

Re: What is wrong with my ccam

Ok if they don't fit me, can I get some required information about what I watch and manually create that file? Probably we're not watching the same channels, that's very personal as you said.

Read two last pages of this thread:

http://www.satlover.eu/forum/cccam/14217-cccam-prio-11.html

You can also try to use these prio, there posted:

http://www.satlover.eu/forum/attachments/cccam/70047d1340714859-cccam-prio-cccam_satlover_s2.zip

I think you should open CCcam.prio file (using notepad) to see what's inside
With a little time you'll be able to edit it, to make it YOUR prio...

[marian321]

Re: What is wrong with my ccam

But you should not make the mistake to overrate the prio file. You can only choose what caids are favored and sent first. This may help a bit when switching to a special channel. The main problem is an overloaded server. In the last weeks e.g. server three and also server four had a poor answering performence even if you are connected and the prio is correct (20 ecms and no cw back).

[cisko]

Re: What is wrong with my ccam

Stop, if you don't have a .prio file you are able to watch all channels, but it required many seconds and switching are not recommended.
Otherwise remove I: 0 at the end of your .prio file is the same to do not have that file, but more used channels might have a faster tuning.

If you are not able to view anything yet, probably that provider is missing.

Anyway compiling your personal .prio file is very simple if you know caids of your interest. Simply write P: caid in a line, and repeat for all caids requested, and at the end write I: 0.