Cccam.cfg

[Didde3000]

Hi mates!

I ordered premium today, but I canīt say that itīs working 100%.

Iīm using enigma 2, and Openpli on a DM500HD.

My Cccam.cfg looks like this:

C: ************************x { 0:0:3 }
C: ************************x { 0:0:3 }

CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo

SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw


Is this correct? I have tried only with the two:

C: ************************x { 0:0:3 }
C: ************************x { 0:0:3 }


And I experience no difference.
My picture freezes alot on the HD channel still I have 30 mbit down broadband.

How do I make a priofile for the channels I want it to work better for??

And, I donīt have a constant.cw file! (Canīt find one on the forum)

Thanks for your help!

[vimmers]

Re: Cccam.cfg

read some of all this stuff http://www.satlover.eu/forum/cccam/4...questions.html
and you don't have to write all this in cccam.cfg
CAID PRIO FILE : /var/etc/CCcam.prio
PROVIDERINFO FILE : /var/etc/CCcam.providers
CHANNELINFO FILE : /var/etc/CCcam.channelinfo

SOFTKEY FILE : /var/keys/SoftCam.Key
AUTOROLL FILE : /var/keys/AutoRoll.Key
STATIC CW FILE : /var/keys/constant.cw
its all set to default in cccam
you can try this
C: ************************x { 0:0:2 }
C: ************************x { 0:0:2 }
or
C: ************************x { 0:0:1 }
C: ************************x { 0:0:1 }
i also running openpli enigma2 on a dm800 with only 20mb download
and don't have any freeze on hd channels on 1 west
unfortunately my tuner stopped working in the dm800 14 days ago
and i had to dig my old dm7000 out
and it still running smoothly but can ofcourse not see the hd channels with it

[microchick]

Re: Cccam.cfg

Hi Didde3000,
Found this thread which is really helpful for CCcam.prio and how to ignore unwanted channels. Its a long thread, about 12 pages. so be patient and try to read the whole thread from the start.

http://www.satlover.eu/forum/cccam/14217-cccam-prio.html

[Didde3000]

Re: Cccam.cfg

Hi Microchick!

I have been looking at that tread but I dont see anything regarding viasat HD channels or the danish HD channels, thoose are my main concern! Swedish HD channels and Cmore HD channels works just fine!

Im using cccam209, enigma2 and Openpli!

Anyone recognises him/herself in my problem??

read some of all this stuff http://www.satlover.eu/forum/cccam/4...questions.html

you can try this
C: ************************x { 0:0:2 }
C: ************************x { 0:0:2 }
or
C: ************************x { 0:0:1 }
C: ************************x { 0:0:1 }


it

Didnt help:/

[marian321]

Re: Cccam.cfg

Normaly it has to work.
{ 0:0:1 } , { 0:0:2 } or { 0:0:3 } makes no real difference. Hopp 3 is most of the time fast enough. Perhaps your internet or ping is too slow.

[pan1300]

Re: Cccam.cfg

Hi Microchick!

I have been looking at that tread but I dont see anything regarding viasat HD channels or the danish HD channels, thoose are my main concern! Swedish HD channels and Cmore HD channels works just fine! ...

If Swedish HD channels and Cmore HD channels are fine, your internet and ping are fine ; sounds rather a server issue. Are the 'problem' channels on the same sat as the ones that are ok? If not: is your setup ok for the 'problem channels and do the fta channels work fine on this sat?

[Didde3000]

Re: Cccam.cfg

If Swedish HD channels and Cmore HD channels are fine, your internet and ping are fine ; sounds rather a server issue. Are the 'problem' channels on the same sat as the ones that are ok? If not: is your setup ok for the 'problem channels and do the fta channels work fine on this sat?

The Cmore and Swedish HD are on 0.8 W,which works great, but the Danish HD are also on 0.8W (they donīt work great) Viasat are on 4.8 E, which doesnt either work. :/

[runmo]

Re: Cccam.cfg

http://www.satlover.eu/forum/cccam/44370-prioritize-scandinavian-channels.html#post247133