Welcome!

Welcome to Satlover forums, full of great people, ideas and excitement.

Please register if you would like to take part. link..

Register Now

Alert: Don't Use Hotmail Email Accounts for registration

Collapse

Before Access to all Forums and Trial accounts you must need to activate your account Email address

No*a Greece - EMM problems & Solution

Collapse
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts
  • VasilisE
    Member
    • Apr 2010
    • 67

    No*a Greece - EMM problems & Solution

    It seems that for the last days there has been a problem with the mentioned card. Most of the channels seem to be being blocked and will not work until i put the card in an Irdeto cam .

    It looks like its got to do with the frequency of the ECM going to the card.
    If there is just one user accessing the card then all channels are ok and nothing blocks. If more users log in then card after a while blocks most of the channels and leaves just a really few open.

    Probably a new feature that was activated on the latest irdeto cards and they found a way to override emm mechanism in CCcam ?

    Does anyone know anything about it?


    Bad times coming to cs, unfortunately...
    Proud owner of DM800 - DM600 -DM500 - Humax5400 IRCI - Nokia 9600

    I post only what i have used and tested myself .....
  • tonybod
    Experienced Member
    • Apr 2010
    • 384

    #2
    Re: No*a Greece - EMM problem????

    What softcam are you running?

    I know of a problem where certain cards running in cccam will not get any updates messages unless a mgdcam is connected to it (if that makes sense).
    Technomate TM600 + 1m motorised dish (TM2300 motor).

    If you find my posts helpful, please press the thanks button.


    Some useful links.
    Freezing problems explained

    Cccam prio files.

    Cccam channelinfo files.

    Forum rules

    Comment

    • VasilisE
      Member
      • Apr 2010
      • 67

      #3
      Re: No*a Greece - EMM problem????

      It is a new problem and it started 5 days ago . As it seems Cccam/Mgcam/newcs/scam emu have the same problem .

      CCcam starts EMM updates:
      12:44:22.072 CCcam: EMM: start filter on irdeto emmpid: 0x500 caid: 0x604 id: 0x0

      And a few seconds later it fails:
      12:44:22.189 CCcam: EMM: demux device failure, stop filter on irdeto caid: 0x604 id: 0x0

      From what i read ( the problem is generic and not only in my box ) this counter measure against cs is pretty awesome and i hope other providers dont follow this

      I don't see the way how to make one card to work as before, because limitations is done inside the card and we can't do nothing about that process.....

      For now 1 no*va card = 4 channels . 5 will make CCcam to need restart to work . The only solution ( not valid for me ) is to use a script to restart CCcam every 3'
      Proud owner of DM800 - DM600 -DM500 - Humax5400 IRCI - Nokia 9600

      I post only what i have used and tested myself .....

      Comment

      • bliner
        Banned
        • Jun 2010
        • 333

        #4
        Re: No*a Greece - EMM problem????

        yes vasili,this is a new methot ANTI CARDSHARING by avon and now (this moment) do you can't fix it

        Comment

        • VasilisE
          Member
          • Apr 2010
          • 67

          #5
          Re: No*a Greece - EMM problem????

          Thanks . Hope CCcam team will release a fix for this in CCcam 2.1.5 .
          Proud owner of DM800 - DM600 -DM500 - Humax5400 IRCI - Nokia 9600

          I post only what i have used and tested myself .....

          Comment

          • Jerry2020
            Banned
            • Feb 2010
            • 221

            #6
            Re: No*a Greece - EMM problem????

            Stopped on cccam for me too

            Comment

            • VasilisE
              Member
              • Apr 2010
              • 67

              #7
              Re: No*a Greece - EMM problem????

              The problems is that as soon as you have people watching more than 4 channels at a time , the card blocks and CCcam needs to be restarted for the card to work again.
              If you leave just 4 channel sids available then it works even if you have 20 users watching. So if lets say you have 10 cards with 4 Sids availiable for each one of them then you are ok .

              Maybe Satlover server should do that ... Must inform the server admin !
              Proud owner of DM800 - DM600 -DM500 - Humax5400 IRCI - Nokia 9600

              I post only what i have used and tested myself .....

              Comment

              • VasilisE
                Member
                • Apr 2010
                • 67

                #8
                Re: No*a Greece - EMM problem????

                Found this in another forum :

                Each card can service 4 channels simultaneously. After that channels starting not to clear(NET, SKY, Alter and so on).

                The big payservers are using card server proxy and 8 cards and they divide the channels, 4 channels to each card. With this their clients watch the 4 same channels on their card and with that the card never blocks.

                No*a has managed for the small payservers to loose their clients and to go to the big payserver which they have the money to have 8 cards minimum.

                Also, the no*a cards which will be available for cardsharing with no freeze will be from big payservers.

                No*a has managed for the small payservers to loose their clients and to go to the big payserver which they have the money to have 8 cards minimum.

                No*a didnt manage to close small or big servers
                actually they decrease the cw so the emms comes more slowly
                so on one nova card that let says are watching 4 ppl 4 differt channels when the 5th users ask for another channel that is not same with the 4 the card stucks and freezing

                so the truth is that csp is the solution but csp is not for everyone and not easy setup
                and csp is not a softcam
                so for the moment only a new softcam can fix the current problem and not easy cause of the cw decrease and the way of kappa card can handle the emms for 10 to 2 secs lets say
                its the same tactic that pehla package used from august 2009
                Proud owner of DM800 - DM600 -DM500 - Humax5400 IRCI - Nokia 9600

                I post only what i have used and tested myself .....

                Comment

                • skytec
                  Experienced Board Member
                  • Mar 2010
                  • 1207

                  #9
                  Re: No*a Greece - EMM problem????

                  This is bad news, can only wait and hope. I think it can not be bypassed ...
                  Is my post useful for you? Please press sigpic

                  Comment

                  • VasilisE
                    Member
                    • Apr 2010
                    • 67

                    #10
                    Re: No*a Greece - EMM problem????

                    For now there is no solution other than having 8 cards each sharing 4 channels. Don't believe anything else you hear about other solutions .....
                    Proud owner of DM800 - DM600 -DM500 - Humax5400 IRCI - Nokia 9600

                    I post only what i have used and tested myself .....

                    Comment

                    • VasilisE
                      Member
                      • Apr 2010
                      • 67

                      #11
                      Re: No*a Greece - EMM problem????

                      CCcam.cfg example for allowing only 4 SID per user :

                      F: user1 passw@rd 2 0 0 { 0:0:3 } { 0604:000000:017A, 0604:000000:016B ,0604:000000:0179, 0604:000000:0178}

                      SID list for N*va:

                      SA: { 017A } #ET1
                      SA: { 016B } #ET3
                      SA: { 0140 } #ANT1
                      SA: { 0179 } #MAD
                      SA: { 0178 } #NET
                      SA: { 013F } #MEGA
                      SA: { 0141 } #STAR
                      SA: { 0142 } #ALTER
                      SA: { 013D } #CINEMA1
                      SA: { 1D53 } #CINEMA2
                      SA: { 1BC2 } #CINEMA3
                      SA: { 3C90 } #SUMMER
                      SA: { 1D51 } #MGM
                      SA: { 0162 } #TCM
                      SA: { 1BC4 } #SPORTHIOGHLITS
                      SA: { 013E} #SPORT1
                      SA: { 0161 } #SPORT2
                      SA: { 1D4D } #SPORT3
                      SA: { 1BC3 } #SP4
                      SA: { 1BC4 } #ET5
                      SA: { 1BC5 } #SP6
                      SA: { 0170 } #SP7
                      SA: { 1BBE } #ENTERTAIMENT
                      SA: { 3C8E } #FOXLIFE
                      SA: { 1D4F } #MTV
                      SA: { 1D4E } #VH1
                      SA: { 0145 } #ALPHATV
                      SA: { 016A } #ALPHATV
                      SA: { 1D99 } #MADGREEK
                      SA: { 1D97 } #TRAVEL
                      SA: { 1D54 } #NATGEOGRAFIC
                      SA: { 015F } #DISCOVERY
                      SA: { 1D52 } #ANIMALPLANET
                      SA: { 1BBF } #HISTORY
                      SA: { 1BD2 } #BOOMERANG
                      SA: { 0168 } #CARTOON
                      SA: { 3C8D } #DISNEY
                      SA: { 013C } #DISNEYXD
                      SA: { 0169 } #MACEDONIATV

                      So to have the full package you need this X8 ( meaning you need 8 cards !! )
                      Proud owner of DM800 - DM600 -DM500 - Humax5400 IRCI - Nokia 9600

                      I post only what i have used and tested myself .....

                      Comment

                      • faccione
                        Board Senior Member
                        • Jun 2010
                        • 238

                        #12
                        Re: No*a Greece - EMM problems & Solution

                        If you don't mind, VasilisE, I changed the title to the thread and stuck it on the forum
                        Please read the FORUM RULES and use the http://www.satlover.com/forum/images...ost_thanks.gif button !!!!
                        !!! 2000 FREE Clines !!! CLICK HERE !!!
                        Hey I have a question for you !! Click and Read...
                        Check for duplicates before posting, use the forum search engine.

                        Comment

                        • VasilisE
                          Member
                          • Apr 2010
                          • 67

                          #13
                          Re: No*a Greece - EMM problems & Solution

                          Originally posted by faccione
                          If you don't mind, VasilisE, I changed the title to the thread and stuck it on the forum
                          Thanks my friend .

                          Who must we contact to make the SID solution work on the free satlover server because although the cards are there they don't work due to the EMM problem ?
                          Proud owner of DM800 - DM600 -DM500 - Humax5400 IRCI - Nokia 9600

                          I post only what i have used and tested myself .....

                          Comment

                          • bliner
                            Banned
                            • Jun 2010
                            • 333

                            #14
                            Re: No*a Greece - EMM problems & Solution

                            This time I write this, the channels of provider work with ..cccam sh@r!ng... for obvious reasons I can not upload a photo and say the name of the server but the server is best for me ....revoltas

                            Comment

                            • papofuzz
                              Newbie
                              • Sep 2010
                              • 4

                              #15
                              Re: No*a Greece - EMM problems & Solution

                              any solution for nova?

                              Comment

                              Working...