Webinterface CCCam Spark?

[gema26]

Re: Webinterface CCCam Spark?

anyone can help??

[purenirvana]

Re: Webinterface CCCam Spark?

It's really quite difficult to help without seeing your config files.

[runmo]

Re: Webinterface CCCam Spark?

give as much possible information so that you can be helped , what's the problem exactly?

[gema26]

Re: Webinterface CCCam Spark?

I try to insert my 3 clines from satlover. I have an edision pingulux with spark. I add them in in var-->tuxbox-->config-->oscam.server , I enable the plug in but notheing happens.

The cline goes like this

[reader]
device = ***********.satlover.com,30***
account = G_M*********,******_****
protocol = cccam
enable = 0
label = satlover
group = 1


What If I want to add other 2 clines?

When I go to the menu of my box I disable the cccam plug in and I enable only the oscam but I get black channels. I have a lot of small freezing on sky uk with cccam and a lot of delay in opening a channel on greek nova cinema channels. I see also on var-->tuxbox-->config--> oscam.conf / oscam.dvbapi /oscam.user

Anyone can guide?

[purenirvana]

Re: Webinterface CCCam Spark?

The first problem I see is that you don't have the reader enabled. You have enable = 0. Try the code below inserting the details you want where required:

[reader]
label = Satlover
enable = 1
protocol = cccam
device = insertaddresshere,portnumberhere
user = insertusernamehere
password = insertpasswordhere
group = 1
cccmaxhops = 3
cccreshare = -1
cccwantemu = 0
ccckeepalive = 1

It's also worth noting that you should only use one of Satlover's lines at a time. However, I believe you can use one line for server one, one line for server two, one line for server three and one line for server four all at the same time. Can a senior Satlover confirm this?

[gema26]

Re: Webinterface CCCam Spark?

well I did try this way

[reader]
label = Satlover
enable = 1
protocol = cccam
device = *************.satlover.com,3****
user = *_***********
password = ******_****
group = 1
cccmaxhops = 3
cccreshare = -1
cccwantemu = 0
ccckeepalive = 1

But nothing again. :-(

[purenirvana]

Re: Webinterface CCCam Spark?

Which server are you attempting to access? Server one, two, three or four?

[toby69]

Re: Webinterface CCCam Spark?

It's also worth noting that you should only use one of Satlover's lines at a time. However, I believe you can use one line for server one, one line for server two, one line for server three and one line for server four all at the same time. Can a senior Satlover confirm this?
========================
can confirm,
only use 1 line from each server.

[gema26]

Re: Webinterface CCCam Spark?

Which server are you attempting to access? Server one, two, three or four?

I have 3 lines. I think it's server one and 2. Much freezing on nova Gr. How do I configure for what server are my lines?

[purenirvana]

Re: Webinterface CCCam Spark?

can confirm, only use 1 line from each server.

Thanks toby69 So, for example, a user can use a line for server three and four at the same time without having their IP blocked?

[kostis]

Re: Webinterface CCCam Spark?

yes one cline from each server at the same time its ok. one from server 3 and one from server 4 when you got access to it.

[gema26]

Re: Webinterface CCCam Spark?

but I have vip membership.. how should I enter my lines?

[purenirvana]

Re: Webinterface CCCam Spark?

I have 3 lines. I think it's server one and 2. Much freezing on nova Gr. How do I configure for what server are my lines?

but I have vip membership.. how should I enter my lines?

You say you've got a lot of freezing on Nova, does that mean you have successfully managed to use Satlover's lines to connect to the servers and decrypt channels?

[toby69]

Re: Webinterface CCCam Spark?

yes one cline from each server at the same time its ok. one from server 3 and one from server 4 when you got access to it.

lets not forget,
server1/2
if you active member, you get your own personal dedicated line, from our mr satlover, no more entering lines,
if, no rules get broken.

[gema26]

Re: Webinterface CCCam Spark?

You say you've got a lot of freezing on Nova, does that mean you have successfully managed to use Satlover's lines to connect to the servers and decrypt channels?

well that's a good question! I have installed the cccam plug in on my Edision argus pingulux (spark) and I have entered my 3 clines. But it's difficult for the box to open the netmed(nova) frequencies. As for sky uk all the time i have small freezes. I am very dissapointed. I don't know if it's my fault or the servers fault. :-(