how to share c-line @ home ???

[angel19]

i wanted to know how to share my c-line at my house with two other drimboxes... what i have to do ?? and also i want to know if is that depends of the c-line or every c -line can be reshared at home lan ??

thanks in advance

[sonc]

Re: how to share c-line @ home ???

Hi,

There is lots of information in the Tutorial section

You could start by taking a look here:

http://www.satlover.com/forum/cardsharing-tutorials/6-beginners-guide-to-successful-cardsharing.html

[cannon_29]

Re: how to share c-line @ home ???

In ur cc-cam config u have to put an f line.F: user pass,in ur other boxes your c-line will be the ip of ur main box port user password.C:192.168.1.## 12000 user pass.and all boxes must be connected on the same lan network via router or switch.

[uttnls]

Re: how to share c-line @ home ???

i wanted to know how to share my c-line at my house with two other drimboxes... what i have to do ?? and also i want to know if is that depends of the c-line or every c -line can be reshared at home lan ??

thanks in advance

You have to have rights of reshare that C line, for example a C line from satlover is configured not to be reshared and will be useless in your implementation

[cannon_29]

Re: how to share c-line @ home ???

Yes you need a c-line with reshare or you share your own card with the receivers.

[peremacedonia]

Re: how to share c-line @ home ???

first check your reshare rights,if u dont have it u cant reshare that c line,but if u have local card,thats ok

[tibsom]

Re: how to share c-line @ home ???

I you are geting you lines from a server outside your network you can do the same Cline on both receivers as the IP address used is your gateway (1 address only)

[dasc101]

Re: how to share c-line @ home ???

When i do what you say .in two receiver at home it does not work.only one works.

[housy01]

Re: how to share c-line @ home ???

It is strange because it's the same when you use free cline from satlover. One cline can be potentially used by many people at the same time. So, I think the client will restore the connection when it need the new ECM.
It's for that you freeze very often when you use free clines and not a dedicated one.

[schatje]

Re: how to share c-line @ home ???

i am looking this options too
What i do is install oscam, then use my c-line to the [reader]
But...the user that i created on the oscam can not open the scramble.... i saw it's online on my OpenBox...need your help

[Triad]

Re: how to share c-line @ home ???

Hello Schatje,
You haven't said what kind of card you use and if it's only cline that you want to forward to u'r client!?
Oscam have many different settings depending on reader U use for real cards. For virtual ones U need only lines and reshare rights, much easier to employ only reshare cline.

[schatje]

Re: how to share c-line @ home ???

Hello Schatje,
You haven't said what kind of card you use and if it's only cline that you want to forward to u'r client!?
Oscam have many different settings depending on reader U use for real cards. For virtual ones U need only lines and reshare rights, much easier to employ only reshare cline.

Hi Triad, thank you for your respond

I dont have any card on this PC (linux with oscam installed), and how to know i can re-share my c-line ?

[Triad]

Re: how to share c-line @ home ???

Here's some useful video

http://www.*******.com/watch?v=hvaXBNenyRs

U need to connect OScam and CCcam as well. If you have any sat rec. then in order to view you don't need linux PC. It only connects as server. I suggest you to read some infos about server configs if you in the other hand want to be as server with reshared cards...

I that case, you could experiment with these infos below:

http://www.oscamtips.info/cccam-area/

[schatje]

Re: how to share c-line @ home ???

Thanks again Triad, i was watching that ******* before, but i dont understand how to make oscam act as cccam server with that.

My situation is:
i have a one c-line for my openbox, and in same time i want use this c-line in my PC/Computer, this not possible right ?

So, i think what if i make a server with oscam, this oscam act as cccam client from my paid c-line server and act as cccam server for box and pc.

sc

[Triad]

Re: how to share c-line @ home ???

I don't know but I think that the idea is all right. Linux server witm oscam and Cccam.cfg employed cline that you are already paying. And you'll give server reshare rights and hop 1 dist. to your Openbox. For PC you're already server so you don't need it.
Only problem if you need clients is that there are no reshare rights on payservers. Maybe on Cccam.it they give for a year subscr. 3 lines which you can reshare to some two addresses and get paid.
You just need some dns addresses to add in your F lines which is for your clients if that is the case, and you can gett some money!