tring help

[joebloggs40]

i have newcas 167 and cccam 212 installed can someone help and tell me the newcas settings for the tring card to read from my dreambox thanks in advance

[uttnls]

Re: tring help

i have newcas 167 and cccam 212 installed can someone help and tell me the newcas settings for the tring card to read from my dreambox thanks in advance

Try this :

NEWCS

<newCSconfig>
<globals>
<listening-ip>127.0.0.1<listening-ip>
</globals>
<readers name="DM800">
<device>
<name>SCI Lower Slot</name>
<type>sci</type>
<mhz>357</mhz>
<node>/dev/sci0</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<!-- <boxkey>0000000000</boxkey> -->
<!-- <rsa>0000000000</rsa> -->
<irdeto-camkey>0000000000000000</irdeto-camkey>
<irdeto-camkey-data>00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000</irdeto-camkey-data>
<crypto-special>No</crypto-special>
<ipk>00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000</ipk>
<ucpk>00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 00000000000000000000000000000000000000000000000000 000000</ucpk>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>15000</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode> 
<priority>round</priority>
</device>

<device>	
<name>smargo</name>
<type>phoenix</type>
<mhz>600</mhz>
<parity>none</parity>
<node>/dev/usb/ttyUSB0</node>
<export>Yes</export>
<enabled>No</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>Yes</blockga>
<blockc0>No</blockc0>	
<boxkey>00000000</boxkey>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>34002</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<pincode>0000</pincode> 
<priority>round</priority>
<sid>
<allow>
</allow>
<deny>
<id></id>
</deny>
</sid>
</device>
</readers>
<radegastserver>
<enabled>No</enabled>
<port>16000</port>
<allow>
<hostname>localhost</hostname>
</allow>
</radegastserver>
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
<httpd>
<server> <port>8080</port>
<enabled>yes</enabled>
</server>
<user>

<name>newcs</name>

<password>newcs</password>

<accesslevel>admin</accesslevel>
</user>
</httpd>	
<debug>
<password>NewCSpwd</password>	
<level>normal</level>
<type>init</type>
<output>console,tcp</output>
<console_options>normal,init</console_options>
<tcp_port>1001</tcp_port>
<tcp_options>normal,init</tcp_options>
</debug>
<newcamdserver>
<enabled>Yes</enabled>
<name>newcs</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<user>
<name>cccam</name>
<password>cccam</password>
<hostname>127.0.0.1</hostname>
<port>15000</port>
<au>on</au>
<sidoverride>off</sidoverride>
<spider>No</spider>
<rate>1</rate>
</user>
<user>
<name>mpcs</name>
<password>dummy</password>
<au>No</au>
<spider>No</spider>
<sidoverride>No</sidoverride>
<readers>
<allow>lower</allow>
<allow>smargo</allow>	
</readers>
<rate>0</rate>
</user>
</newcamdserver>
</newCSconfig>

CCcam

N: 127.0.0.1 15000 cccam cccam 01 02 03 04 05 06 07 08 09 10 11 12 13 14

[vimmers]

Re: tring help

i dont know newcas 167 or a tring card
but don't u think that u shall use the latest cccam 2,2,1
that's more up to date to read new cards

[uttnls]

Re: tring help

i dont know newcas 167 or a tring card
but don't u think that u shall use the latest cccam 2,2,1
that's more up to date to read new cards

Yes more "uptodate" and more incompatible with older CAM's. The thing is that you should never use the latest CCcam version, at least i don't, of course excepting when you have to, because of new features.

[joebloggs40]

Re: tring help

thanks for the advice i have got the card working, yes i have tried 221 but the problem i have now is it won't connect to clients i have done the port forwarding that is ok done the ip address all ok but still not getting connected i am connected to the servers but dont know what has happened also i have tryed to put a new image in but cant get dreambox to stop on ip when you press the standby key. thanks in advance

[vimmers]

Re: tring help

now i figured out what u mean with newcas its newcs
if i recall u shall also setup your friends in newcs
</user>
<user>
<name>friendsname</name>
<password>friendspassword</password>
<au>No</au>
<spider>No</spider>
<sidoverride>No</sidoverride>

[uttnls]

Re: tring help

thanks for the advice i have got the card working, yes i have tried 221 but the problem i have now is it won't connect to clients i have done the port forwarding that is ok done the ip address all ok but still not getting connected i am connected to the servers but dont know what has happened also i have tryed to put a new image in but cant get dreambox to stop on ip when you press the standby key. thanks in advance

So what is the problem, i don't understand what is not working now ?

now i figured out what u mean with newcas its newcs
if i recall u shall also setup your friends in newcs
</user>
<user>
<name>friendsname</name>
<password>friendspassword</password>
<au>No</au>
<spider>No</spider>
<sidoverride>No</sidoverride>

Nope, he is infact giving the line to his CCcam server which is going to share via C lines to the clients.

That is the ideea of CAM combination NEWCS+CCcam

[vimmers]

Re: tring help

ok
i haven't tried cccam and newcs
but mgcam and newcs and there should i do that

[joebloggs40]

Re: tring help

got it sorted now thanks for all your help