CS Server ClarkConnect

[gbntt]

Hello everyone,

I am a new user ... very curious, since I came into this fabulous world of the SAT
I decided to give my contribution to trying to make some order among the thousands of documents
that are located in the network.

Receiver: VU + Solo2
Antenna: Parabola 100Cm Fixed 13E&19.2E (.. I want to put the rotor, the second step)
OS: Enigma2-BlackHole 5.2 (Plug in Glass indispensable Utility)
EMU: CCCcam 2.3.0

Currently I have managed to make the system work using the free C-Line, but I would
go to this:
1. oscam server linux external and hook my receiver and the other
of a friend (ClarkConnect) on VMware
2. Initially I wanted to use CS without external card reading local


Can anyone help me? I gradually create the howto to share on the forum.

[gianni253]

Re: CS Server ClarkConnect

Why do you want to start with a complex situations when you can manage it with simple solution ...
Your receiver can work as cs server and client at the same time, so you friend can connect to your box and no additional hw is required.
Of course, you need a subscription.
If you don't have it means your are "resharing" and I guess you won't find any help in this place.

[kalpikos]

Re: CS Server ClarkConnect

Hi gbntt and welcome

First of all you must know that not everything can be shared.
A free c-line from this forum is free for you, not for your friends.
I mean that in order to reshare a c-line you must have the rights to do, the rights for resharing.
If you do it without the rights , probably you will be banned from the server immediately.

You can still using oscam but only for you.
If you find a c-line with reshare rights, then you can continue with creating your own server.

[gbntt]

Re: CS Server ClarkConnect

Hi gianni253 kalpikos and thanks for your answers.

I wanted to share my S..y card and find other resharing C-line by paying a subscription
to a CS foreign provider( for channels out of the card).

The idea of using an external HW for the CS server is to separate the CS from receivers (so I can use low cost Rx with lower performance in terms of CPU speed, etc ...) and have the chance to get a few more friends.

For a start you think that I can subscribe to C-line for 4 reshare (Two RX I and two my friend)?

[gianni253]

Re: CS Server ClarkConnect

...The idea of using an external HW for the CS server is to separate the CS from receivers (so I can use low cost Rx with lower performance in terms of CPU speed, etc ...) and have the chance to get a few more friends.

It's not a bad idea, but my advice is to use an old dm500 (clone) as cs server.
You can buy it for a few euro and it will do the job for at least 10-15 friend.
If you have a 09cd don't forget internal reader mod (a simple resistor) or you will burn your card.
Bye

[gbntt]

Re: CS Server ClarkConnect

Hello Gianni
In fact, I wanted to start with my Vu + Rx Solo2 and parallel begin to configure the external server.
I would also like to have your opinion on these two arguments:
1. do you think the card reader reads the card of my rx 09cd
(natively should read the card Xcrypt although I have not yet tried to configure the card reader inside the Cccam2.3.0)?
2. It can be enabled the section of the forum to get the guides and insights without having a lot of post behind?

__________________
If my post was useful, please, use "Thanks" button

[gianni253]

Re: CS Server ClarkConnect

1. do you think the card reader reads the card of my rx 09cd
(natively should read the card Xcrypt although I have not yet tried to configure the card reader inside the Cccam2.3.0)?

I never tried with ClarkConnect but your internal reader should work ok.
I wouldn't use ccc*am as cs server ... use osc*am !
It's more advanced, flexible, up to date, open source and can manage ecm cache (same concurrent requests from two different clients are cached and card has to give only one "answer")

2. It can be enabled the section of the forum to get the guides and insights without having a lot of post behind?
Not my job ... maybe an admin can answer to this question.

__________________
If my post was useful, please, use "Thanks" button

[gbntt]

Re: CS Server ClarkConnect

Hello Gianni
I started using CCcam because I wanted to see how CS worked because the I still have not subscribe to some providers. if I switch to oscam can i use the only client to manage the c-line?
Thanks

[gianni253]

Re: CS Server ClarkConnect

Oscam can work as cs server and client at the same time in the same receiver.
So, you will have oscam on cs server (my recommendation) and oscam or cccam (this is your choice) on client.
Of course you can manage clines with oscam.