my problem not solve

[abrarshah]

i ask a question how enter satlover cline in my startrack 2015 plus
here is cline in one line
in receiver
(1) server name
(2) service port
(3) user name
(4) password
how devide a cline in 4 parts
this is my real question

[zoran89]

Re: my problem not solve

i ask a question how enter satlover cline in my startrack 2015 plus
here is cline in one line
in receiver
(1) server name
(2) service port
(3) user name
(4) password
how devide a cline in 4 parts
this is my real question

C: cccam.satlover.com 32359 aaaaaa bbbbbb no { 0:0:3 }

(1) server name = cccam.satlover.com
(2) service port = 32359
(3) user name = aaaaaa
(4) password = bbbbbb

[pan1300]

Re: my problem not solve

hi

extra info: ignore the 'C:', 'no' and '{ 0:0:3 }' - if there are any signs like underscore '_' this must be entered!
and remember: only 1 cline of same satlover server at the same time!

let us know if you sort it out or need any further help.

[abrarshah]

Re: my problem not solve

plz devide this key

C: cccam.satlover.com 32359 7AE0F132_86A607F9 www.satlover.com no { 0:0:3 }
because this key is very long

[toby69]

Re: my problem not solve

hope this helps, do not to forget to thank members for help

here > Name or IP Address:- cccam.satlover.com
Port:- 06658 you can use the RC to enter this
ID:- 86854A67_36FC8D30
Password:- www.satlover.com

[KVF1966]

Re: my problem not solve

(1) server name
(2) service port
(3) user name
(4) passwort

Hi guys, And you don't cline enter in this form. It seems to me there is not correctly formulated question. May be in Oscam, but the other option

[rizwan]

Re: my problem not solve

plz devide this key

C: cccam.satlover.com 32359 7AE0F132_86A607F9 www.satlover.com no { 0:0:3 }
because this key is very long

What do you mean by long key ? Its not a key, its whole detail for connect to server

[vimmers]

Re: my problem not solve

maybe he can't add a long password and username
if you can't do that you have to buy a cline and say to the provider you cant have a long username and password
or find a free cline you can enter

[pan1300]

Re: my problem not solve

hi vimmers

perhaps and possible, but it would really surprise me that his box couldn't enter such long usernames and passwords.
Usual they are that long or even longer ; @abrarshah: take a look at: http://www.satlover.eu/forum/free-ca...site-here.html (I don't like to refer to others, but won't harm to test only ). If you can't enter the cline with the remote control, perhaps there are other options (usb/file).

[sideralgr]

Re: my problem not solve

what about no { 0:0:3 }

if is not suppose to entered, why is encompased in cline?

[vimmers]

Re: my problem not solve

cos some receivers can handle it
so can you decide how many hops away you will recive the cards
on mine clines i have them set to { 0:0:2 }
thats the server like satlover + he get cards from another server
so { 0:0:3 } are satlover + cards from another server and that server also get cards from another server

[peremacedonia]

Re: my problem not solve

1.Press menu,go to internet option and press OK\

2.In internet option go to NET CLIENT KONFIG and press OK

3.Press yellow button to edit

4.Change values to satlover server

EX.
SERVER NAME.........cccam.satlover.com
SERVICE PORT.......32359
USER NAME.........yourusername
PASSWORD.......yourpass
DES KEY... all zeros
ACTIVE SERVER.... press ok
EMM ENABLE.......press ok
EMULATOR....change to cccamed

5.Press red button to save

Now your server should work.remember u must be first configure box to conect to internet,and all settings must be correct or your line will not work

[Satphoenix]

Re: my problem not solve

what about no { 0:0:3 }

if is not suppose to entered, why is encompased in cline?

It's not urgently necessary to add it to the line, it can help a bit to avoid freezes because it can take to much time to jump to more than hop3.
So it's a good suggestion in the free lines here to add it.

[buiacco]

Re: my problem not solve

Sorry Satphoenix,
I'd like to understand,
to optimize freeze on free cline it's good to add at the end of line :
no { 0:0:3 }
Could it be same adding:
no { 0:0:2 } ?
Could it be better to use the second end of line?
Thanks in advance and regards

[easydigital]

Re: my problem not solve

Yes it's a good suggestion in the free lines here to add... { 0:0:3 }

It's not urgently necessary to add it to the line, it can help a bit to avoid freezes because it can take to much time to jump to more than hop3.
So it's a good suggestion in the free lines here to add it.