Fausto cccam client cant decode Sky

[ftaboy]

recently i connected my PC to my box (StarSat x95) with a RS-232 cable , and selected PC CSC ECM in protocol of STB and Fausto connected successfully to the receiver next i entered my cline (satlover S2) in the FaustoClients.cfg and Fausto status changed to running BTW now I'm able too watch canal+ and some other channels through cccam but Sky Italia (on hotbird) not decoding, on the pc it receive DCW from CAID 09CD and fast, but in the Fausto it set to CAID 0919 and can't decode the ECM , i dont know how to change CAID in fausto , also i tried to filter CAID 0919 but not changing the CAID. so i need help how to watch Sky It on CCCAM Client of Fausto. im new to Fausto.
thanks

[jaro]

I tried to use Fausto long time ago and as far as I remeber had same problems not decoding some channels.Tried so many different programs and now I'm using
O-Box Receiver v3.21 it's so good and so fast on opening channels.All you have to
do is put your C line into plugin Hadu.ini.I'm using this program on my Samsung 9500 via ci
because support sssp protocol.Unfortunately can't use on Yumatu iq+ because doesn't support twin protocol.Hope your receiver support ssssp !

I had same problems m8 when i used Fausto and had to restart pc so often.Tried so many settings and could not figure out how to get it working,hope someone have some more experience with Fausto and share it,sorry can't help you much !

[ftaboy]

Re: Fausto cccam client cant decode Sky

I tried to use Fausto long time ago and as far as I remeber had same problems not decoding some channels.Tried so many different programs and now I'm using
O-Box Receiver v3.21 it's so good and so fast on opening channels.All you have to
do is put your C line into plugin Hadu.ini.I'm using this program on my Samsung 9500 via ci
because support sssp protocol.Unfortunately can't use on Yumatu iq+ because doesn't support twin protocol.Hope your receiver support ssssp !

thanks for reply , sadly my receiver doesn't support SSSP only have PC CSC ECM & PC CSC EMU.
an other problem i have with fausto is sometimes when i am watching a channel it stop decoding and i should exit fausto and reopen it and also some times hangs. any idea guys ?

[spanky_1209]

Re: Fausto cccam client cant decode Sky

I also tried to use FAUSTO plugin together with the RS 232 cable. I have sucess to decode all of Sky channels but it did not laste for long time. The codes are reciving in the FAUST software but the channels after a while are not opening. I thing it is the problem of the reciver that I was used.

[ftaboy]

Re: Fausto cccam client cant decode Sky

I also tried to use FAUSTO plugin together with the RS 232 cable. I have sucess to decode all of Sky channels but it did not laste for long time. The codes are reciving in the FAUST software but the channels after a while are not opening. I thing it is the problem of the reciver that I was used.

yes i also enabled DVB Plugin in Fausto , but Hadu only show one CAID in its list(monitor) 0919 which cant decode. no success for me.
also tried to change CAID from receiver on ECM List , i + 1 , but not able to change any caid when protocol "PC CSC ECM" is enabled.
also i tried ignore CAID : 0919 in fausto , when i select and SKY IT channel it say 0919 ignored but not change to 09CD
guys there should be a way to decode Sky IT with Fausto , it should be possible....

[empb]

Re: Fausto cccam client cant decode Sky

Have you unticked the ECM Debug and EMM Debug boxes under the server and Client TABs, when the text file logs become to big, I find this is when Fausto stops/crashes (but if unticked no logs or txt files are created).

I'm using Newcamd with my Sky UK 0963/000000 Card and Fausto/Spiderbox.

And with my UPC Direct card in Spiderbox (when Sat Lover lines are turned OFF I can use Spiderbox as Newcamd Server for my UPC Direct card 0D02/0000A0 to Fausto, and share it to my Topfield TF4000PVR with Fausto/Season Interface). I've used Fausto with Sky Italia CWs with no issues (09CD).

[ftaboy]

Re: Fausto cccam client cant decode Sky

Have you unticked the ECM Debug and EMM Debug boxes under the server and Client TABs, when the text file logs become to big, I find this is when Fausto stops/crashes (but if unticked no logs or txt files are created).

i did that but no different.
from this morning it only receive once time the DCW from server and stop decoding, even ECM are changing !! :| Fausto is very unstable.
any other similar program which support PC CSC ECM ? i know there is HDVB & gladiator ... but they doesn't support 'PC CSC ECM'.

[empb]

Re: Fausto cccam client cant decode Sky

Not that I've used but there prob will be? (Quick Internet search suggests maybe?), but I'm happy using Fausto/Vplug/Newcamd/Diablo(+Other CAMs)/Spiderbox software/hardwares.

You using last ever release of Fausto v1.45 or v1.44? Or an older version?

[ftaboy]

Re: Fausto cccam client cant decode Sky

Not that I've used but there prob will be? (Quick Internet search suggests maybe?), but I'm happy using Fausto/Vplug/Newcamd/Diablo(+Other CAMs)/Spiderbox software/hardwares.

You using last ever release of Fausto v1.45 or v1.44? Or an older version?

I', using V1.45 , and still trying to realize why decode once and solve the problem...

[jaro]

Re: Fausto cccam client cant decode Sky

Hi ftaboy,
have you tried Dz multi Cccam sharing protocol program.I thing there is option that
support PC CSC ECM protocol!Might work for you,hope so.

[ftaboy]

Re: Fausto cccam client cant decode Sky

Hi ftaboy,
have you tried Dz multi Cccam sharing protocol program.I thing there is option that
support PC CSC ECM protocol!Might work for you,hope so.

thanks for suggesting this program but not worked with PC CSC ECM, this app have 2 big problem !!
#1 : when try to login to cccam server and loading cards when reach 199 card from server it stop and try login again !!
#2 : not able to decode any channel !!
BTW thanks