Openbox

[Hunk2012]

openbox
How to enter a CLine in Openbox

Its easy to enter the CLine once you have the box.

You press the Menu button, go down to Network Local Setting, go across to CCcam plug setting, go to Manage Config Files, In manage Config files, choose CCcam.cfg, Click on Add (Blue Button) Now this is where it gets hard.

Protocol leave at CCcam
Host = IP Address
Port = Port Number
User = Username
Password = Password.

So if your cline looked like this

C: 192.168.1.3 16000 Billy Bigplums
Then in Host you would enter 192.168.1.3
Then in Port you would enter 16000
Then in User you would enter Billy
Then in Pasword you would enter Bigplums
Once done, press the yellow button.
You will now see the cline saying C: 192.168.1.3 Billy 16000 Offline.

Now press the Green button and it will put a tick next to Offline, exit the menu and it will say saving, Restart the box and it will work.

If you are going to use the USB to dump the Cccam.cfg file, make a notepad file and enter on the top line
C: 192.168.1.3 16000 Billy Bigplums

Save it as a cfg file and load it in using the menu.

[uragano47812]

Re: Openbox

I'm interested about this box. where can i find the last firmw? and does it support directly wifi usb dongle or is it better to use Access point in client mode?

[housy01]

Re: Openbox

I don't think that it support an usb dongle. You will have to put bridge between the box and access point if you want tu use a wifi connection.

You can find the last firmware for clones here :

_http://www.yojiatech.com/a/Support/Download/

It works quite well, the unique dafault I see is the settings management. There is no good software to manage a personal list of settings...

[blaxes]

Re: Openbox

tenho uma box dessas e é um espectáculo, sem duvida que é uma boa compra.
abraços a todo o forum.

[jonny2by4]

Re: Openbox

i dont think it support direct wifi usb dongle, and i have read on a nother forum that the firmware update cause the box to freeze alot.

[housy01]

Re: Openbox

You can always go back to your original firmware if you have made a dump and back it up on your computer.
Simply copy it to a usb stick and update your box like for other firmware.

[satfan]

Re: Openbox

i recommend to install new firmware as new as we find in web

[topman96]

Re: Openbox

this box sound ok are the a good price and whee can you get one

[dinoel]

Re: Openbox

Turn Openbox S9/S10 into a Server
How to make your OpenBox S9 HD or S10 HD satellite receiver into a server for use by clients for the purpose of sharing your own cards.

1. press menu
2. scroll down to Network Local Setting
3. press ok on remote
4.arrow right to Newcamd Server Settings
5. press ok on remote
6. enter newcamd server parameter
7 servversetting -ON-
8. TCP Port -eg. 13000- this MUST be forwarded in your router
9. Des Key 01020304055060708091011121314 Can be change to your own
10.add user in Newcamd server User manager with green button on remote
11. add username password allow emm yes
12. press yellow to save the configuration .

Now box is setup for server with 1 client and a reboot is always a good idea .

In the Client box with CCcam its the N: line to use for acces the server eg N: seerver_ip_or_dns Port user password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

[jonny2by4]

Re: Openbox

in english please so we can all understand.