Please help me about microbox dongle 1

[KING_OF_IT]

Please give me latest microbox dongle1 software and uploader please which software work on w6 and w3

[EUROASTRA]

Re: Please help me about microbox dongle 1

I hope to help

Here are a simple steps, about how to update the MicroBox dongle.

Step 1:

- Connect the MicroBox dongle to the power, and make sure its turned on ( Red light inside it ), after that connect the serial port from the MicroBox to the serial port, in your PC.

Step 2:
- Download the cleaner software for the downloads section, then open the .rar file and you should be able to see the below files, open the cleaner.exe file.

Step 3:
- After you have the program opened click START button, then you should see that a “Waiting Boot…” is showing up near the software title, as the below image shows.

Step 4:
- Now unplug the power cable from the dongle for 2 seconds then plug it again, into the MicroBox, after that you should be able to see the progress bar increasing and the cleaning process is started, as the below image shows.

Step 5:
- Once the cleaning process reaches 100%, you are good so far, unplug it again from the power for 2 seconds then plug it again.

Step 6:
- Now download the software that you want to install from the site, then open the .rar file as below.

Step 7:
- Open the .exe file, which is the software it self.
Step 8:
- After you have the program opened click START button, then you should see that a “Waiting Boot…” is showing up near the software title, as the below image shows.

Step 9:
- Now unplug the power cable from the dongle for 2 seconds then plug it again, into the MicroBox, after that you should be able to see the progress bar increasing and the transferring process is started, as the below image shows.

Step 10:
- Once the transfering process reaches 100%, you are good so far, unplug it again from the power for 2 seconds then plug it again, and by this you have the software installed at your MicroBox Dongle.

——————————————————————————–

How to Install MicroBox II Software:

Step 1:

- First of all if you have MicroBox I, you have to convert it to MicroBox II, so what you need to do is to download the Loader software form the softwares section, you will see the file as below:

Step 2:
- Now as you can see in the above picture, choose your configuration, like the port that you want to use, in our case its COM1, and the mode as well, download, Dump, Erase. In our case we want to download the file so we should choose download. After that click browse and locate the .bin file that you want to download, e.g download the W3 software and locate it from the **********.

Step 3:
- Now click download and the downloading should start automatically, so depends on the software the you choose, you dongle will be updated upon that. Once you are done, reboot your dongle and you should be fine

[KING_OF_IT]

Re: Please help me about microbox dongle 1

Bundle of thanks brother but microbox dongle 1 software link

[joesat]

Re: Please help me about microbox dongle 1

My microbox 1 went off october 2010.Please help to make it useful again for w4/7.Any help will be appreciated.

[joesat]

Re: Please help me about microbox dongle 1

my microbox1 went off since last october 2010 and i have tried many softwares but none is working on W4/7 .Any help will be highly appreciated

[italy2010]

Re: Please help me about microbox dongle 1

my microbox1 went off since last october 2010 and i have tried many softwares but none is working on W4/7 .Any help will be highly appreciated

hi
look at my last post; i post one sw for micro 1 in telstar12.
maybe work.
if not work you can change microbox 1 ic.