client ports on firewall

[aleks_jakob]

Hi
What ports should be oppened on firewall to allow client box or computer to connect with cardsharing server
Opening only server ports won't work.
What ports are used by cccam and hadu ..???

Thanks in advance.

[tonybod]

Re: client ports on firewall

Are you running a server or trying to connect to one?

[aleks_jakob]

Re: client ports on firewall

Hi
I am trying to connect to a server
But I need to know the server part of port's used also...

thanks for your reply

[besit]

Re: client ports on firewall

Actually it's enough to open listed server ports.
Describe the situation fully.
Scenario 1
You have router at home
- Disable all incoming connections. It won't affect packets coming back.
Scenario 2
You are network admin at job and you want to give access to server only to specific hosts on your LAN to specific ports.
Grant permission to connect to specified ports to some hosts (ip) on your LAN
If firewall lets some traffic to one side it will accept it back.

[aleks_jakob]

Re: client ports on firewall

Thanks for your reply

I want to set my router firewall default packet filter to "drop"
earlier for some reason was not working just by adding the server ports to forward...
now it's working just as it should.

[PifyLinuvw]

client ports on firewall

Maybe your problem is your firewall. You might need to config your router to allow others to connect through the ports mentioned above.

If you have a router then it should have come with a manual that will explain exactly how to set up the ports and how to access your routers ip for the configuration. Not sure anyone can give you the exact formula for your particular router setup.