Problems on server

[findeciclo]

Re: Problems on server

Please is there any problem with number 4 server? I can use number 3 server, but I can't use server number 4, I have realice this problem from 3 or 4 days before.
Please tell me something.
Regards and thanks.

(I don't know if this question is right here, If not, apologize, and please tell me where can I ask this question. Thanks.)

[mixdoctor]

Re: Problems on server

Same is happening on my 500s. Methinks it is internet problem. I heard over the radio while I was driving this morning that they have immense internet connectivity problems, worldwide, due to sunspots.

My problem is worse when I connect using WiFi than connecting by cable.

The problem will clear up in two or three days according to guru.

This has been happening for 2 weeks so I don't think that is the problem. It is funny how when i come out of standby I quickly look at the cccam serves and the satlover line is connected fine giving me over 300 cards but after 30 secs it dissconnects giving me no cards. I have other servers working and once they connect they are fine and stay on all the time so i know the box is ok so any other ideas please peops

Mixdoctor

[dessertrat]

Re: Problems on server

Same is happening on my 500s. Methinks it is internet problem. I heard over the radio while I was driving this morning that they have immense internet connectivity problems, worldwide, due to sunspots.

My problem is worse when I connect using WiFi than connecting by cable.

The problem will clear up in two or three days according to guru.

[mixdoctor]

Re: Problems on server

@ Tonybod the link at bottom of your message is not working about cccam not updated, it take me to no page and the post after you alos mentions that could be the problem. Can somebody point me to the correct page so I can update my cccam please

Thanks guys
Mixdoctor

[sasho123]

Re: Problems on server

tonybod

your Cccam addon files (probably not the latest) link Is invalid

[tonybod]

Re: Problems on server

Hi All,

Can anyone please help me or explain why my problem keeps happening. I have a Dreambox DM7200 and this has a SIFteam image ver 1.9.4 on it and running CCcam 2.1.4 I am quite new to this as you all may gather looking on my post count but what is happening is I am using 1 line which is posted on Server 3 and I put this line into my CCcam config and then wait with my box on standby for 15 mins after I upload my CCcam config to my box. I then turn my box on and bingo all working and when I check my CCcam info I see that I have over 300 card from the satlover server which is great. After about a minute my screen goes blank again and checking the CCcam servers I am now getting no cards off your server. I then put the box into standby for about 15 mins turn it back on and hey presto you are giving me the cards back but again after a minute it all goes blank again.
Its seems that if my box is in standby and I am not viewing anything your server is giving me the cards but soon as I turn on the box and start to watch a channel your server then sees me and stops sending me cards. Am I doing anything wrong, Why does it allow me cards in standby but when I try to use the cards ie watch a channel it seems to take them all back and give me nothing. Any help please as I would be very greatful.

Mixdoctor

Has anyone got any idea as it's still happening even with todays new lines please

Thanks

It sounds like more than one person is trying to use that particular C line. They are quite popular to if you find one that is working (and keeps working), leave the box on if poss.

[mixdoctor]

Re: Problems on server

ADMIN,

Please don't moan I have had no reply about this problem so I am thinking it is in the wrong section so I am going to repost it somewhere else and hope I get an answer then I shall delete the post that does not receive an answer as this problem is still happening even with new lines

Mixdoctor

[mixdoctor]

Re: Problems on server

Hi All,

Can anyone please help me or explain why my problem keeps happening. I have a Dreambox DM7200 and this has a SIFteam image ver 1.9.4 on it and running CCcam 2.1.4 I am quite new to this as you all may gather looking on my post count but what is happening is I am using 1 line which is posted on Server 3 and I put this line into my CCcam config and then wait with my box on standby for 15 mins after I upload my CCcam config to my box. I then turn my box on and bingo all working and when I check my CCcam info I see that I have over 300 card from the satlover server which is great. After about a minute my screen goes blank again and checking the CCcam servers I am now getting no cards off your server. I then put the box into standby for about 15 mins turn it back on and hey presto you are giving me the cards back but again after a minute it all goes blank again.
Its seems that if my box is in standby and I am not viewing anything your server is giving me the cards but soon as I turn on the box and start to watch a channel your server then sees me and stops sending me cards. Am I doing anything wrong, Why does it allow me cards in standby but when I try to use the cards ie watch a channel it seems to take them all back and give me nothing. Any help please as I would be very greatful.

Mixdoctor

Has anyone got any idea as it's still happening even with todays new lines please

Thanks

[toby69]

Re: Problems on server

i also see white pages working, well done all at satlovers, people will be happy now.
will try a few later myself.

[dessertrat]

Re: Problems on server

Guys I have BIG problem:
When I add Server3 line it remains active for period of time. (Up to 30 min) Then it goes dead.
If I then replace it with server 4 line it is active and then same story.
If I then replace it with with new Server 3 line it remains inactive.
I thought it was once-off problem yesterday, but it keeps re-occurring.
My ISP informs me that it does not block ports.

I use a Huawei 3G GSM Router to access internet.
Windows 7

Re: Problems on server

Hello;

Evrything is working....thanks a lot .....no blank page...server 3,4 working

THANKS again ....

[dessertrat]

Re: Problems on server

It is now cardsharing.info turn. Their turn for white pages I mean.

[sucan]

Re: Problems on server

The problem is solved. If you want success you must be patience. No more "blank white pages"

[kudok]

Re: Problems on server



your 41. ...... is free

[dessertrat]

Re: Problems on server

My Satlover cline is active for about 2-3 hours after I enter it, then it goes red. It then stays so even after I enter new tested Satlvr Cline. Are you guys blocking IP's as security measure or is it my ISP blocking it?
Other free server clines remain active.