Welcome!

Welcome to Satlover forums, full of great people, ideas and excitement.

Please register if you would like to take part. link..

Register Now

Alert: Don't Use Hotmail Email Accounts for registration

Collapse

Before Access to all Forums and Trial accounts you must need to activate your account Email address

Quick guide to Multiboot your VU+ with Meoboot and USB stick

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • anacondama
    Banned
    • Jul 2010
    • 865

    Quick guide to Multiboot your VU+ with Meoboot and USB stick

    As the title, thought I'd put a quick guide together on how to multiboot with Meoboot and USB stick.

    1. Format your USB stick FAT32 with HP Tool

    2. Install Meoboot from plugin panel if using VTI

    3. Goto plugins and select Meoboot

    4. Press green button for devices and press red button to format

    5. Once done you need to re-start Meoboot via plugin

    6. Press red button to install Meoboot

    7. Reboot receiver if its not re-booted automatically.

    8. Start Meoboot via plugins
    9. FTP what ever other image you wish to multiboot to /media/usb/MbootUpload/ This must be a NFI image. NOT USB image.

    10. Press red button to install image

    11. Meoboot will then install the new image onto your USB stick. This takes a few mins and the VU+ will freeze. Once done the VU+ will automatically re-boot into your new image.

    12. To boot back into the flash image, start Meoboot via plugins, select flash and press green button to boot image:

    Re-Shared Post
    EnjoY
Working...