Welcome!

Welcome to Satlover forums, full of great people, ideas and excitement.

Please register if you would like to take part. link..

Register Now

Alert: Don't Use Hotmail Email Accounts for registration

Collapse

Before Access to all Forums and Trial accounts you must need to activate your account Email address

TM 500 Record to your PC

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • sahilkhan
    Senior Member
    • Jun 2011
    • 120

    TM 500 Record to your PC

    You can record to a PC hard drive via a cifs mount using the web interface to set the timers or possibly using software such as ngrab

    How to record to your PC with Ngrab

    This guide is assuming that you have already setup a shared folder on your PC, and it is successfully mounted on your TM via Expert Settings\Communication Setup\Mounts


    1. Download and install Ngrab to your PC.

    After installation is completed, launch Ngrab. It will appear as an icon located in the notification area of your desktop.

    2. Right click on the icon, select and click on Einstellungen.

    3. Now select dBox Einstellungen, and fill in the IP Address field with the IP address of your TM. Click OK.

    4. Click on Dateisystem Einstellungen, and browse to the destination folder where your recordings will be saved, and click OK.

    5. Now, you need to set up your TM. Press MENU on your remote control.

    6. Go to Setup and press OK.

    7. Go to Expert Setup and press OK.

    8. Select Ngrab Streaming Setup and press OK.

    9. In the Srv IP field, enter the Ip address of the PC running Ngrab.

    10. You then need to detect the MAC address. This can be done by pressing the blue button, or by moving the cursor to the ₓdetect MAC address₝ field and pressing OK. The procedure takes few seconds. Make sure Ngrab is running on the PC, else it will not work.

    11. Save the settings by pressing the Green Button, or by moving the cursor and pressing OK.

    12. Now, both the TM and your PC are setup.
    The final step is to set the timer on your web interface.

    13. Therefore, type your TM IP address in your browser, then enter your username and password. Then click on Timers.

    14. Then click on Add, select whether it is a One-Time Event or a Recurring Event.

    15. Select Ngrab, select the bouquet, and the TV channel.

    16. Click Add, and a window will pop up to confirm the successful creation of the event.

    17. The TM will automatically switch to the chosen TV channel at the set time. The Ngrab icon will turn red when the recording starts. If you move your mouse cursor over the icon, the name of the event being recorded will be displayed.

    18. The event will be recorded to the selected folder with an M2P extension. This can be played with VLC, Nero, VirtualDub. Therefore, it can also be converted to MPG2 and burned to DVD.

    dont mind the attached files ( they are for tm5402 setup)
    Attached Files
Working...