Tweet
How To Insert Biss Keys & Constant CW Keys Manually From The Remote(HUMAX)
Biss Keys
1. Get the Biss key of the channel you want to watch, the Biss keys are always made up of 16 digits, for example : Tv 8 Turkey on Turksat 42oEast (Biss key for Tv 8 Turkey is 1000000000000000).
2. Go on Tv 8 Turkey.
3. Press the ? button on your remote and a window with all the channel details will pop up on your screen.
4. Write down on a piece of paper the "Frequency", the "ServID" & the "PMTPID" of the channel in question, for Tv 8 Turkey the "Frequency" is 11830, the "ServID" is 1 & the "PMTPID" is 32.
5. Use this calculator to convert these numbers from Decimal to HEX : [URL="http://tinyurl.com/mq5cm[/URL]
6. When these numbers are converted to HEX you will get the following : 11830 = 2E36, 1 = 0001 & 32 = 0020.
7. Now with your remote go to : Menu-->ToH-->Parser-->Ram Editor an press the Radio button.
8. Go on one of the lines which is empty i.e. all zeros.
9. Before you insert the key you have to shorten the Biss key from 16 digits to 12 digits, therefore split the key as follows :
1000000000000000
Remove the colored keys i.e. the 4th pair of keys and then the last pair of keys.
To explain myself better you have to remove always : the 7th/8th key & the 15th/16th key.
When you do this exercise you will have the following key : 100000000000.
10. Now Press Ok and insert the "Frequency" in HEX (2E36) then the last byte of the "ServID" in HEX (01), then the last byte of the "PMTPID" in HEX (20) and at last the Biss key. For example for Tv 8 Turkey you should insert the following 20 digit key : 2E360120100000000000.
11. When you have inserted the key as instructed above press "OK" and you would have inserted the Biss key for Tv 8 Turkey, hence you will be able to watch this channel when it is encrypted in Biss.
Constant CW Keys
1. Get the Constant CW key of the channel you want to watch, the Constant CW keys are always made up of 32 digits for example : *** View Plus on Hotbird 13oEast (A recent Constant CW key for *** View Plus was : 02BAB571D4FCFCCC4C4478081AB5804F - N.B. this is an old key therefore it is not active anymore, I am using it only to set an example).
2. Go on *** View Plus.
3. Press the ? button on your remote and a window with all the channel details will pop up on your screen.
4. Write down on a piece of paper the "Frequency", the "ServID" & the "PMTPID" of the channel in question, for *** View Plus the "Frequency" is 12360, the "ServID" is 14002 & the "PMTPID" is 402.
5. Use this calculator to convert these numbers from Decimal to HEX : [URL="http://tinyurl.com/mq5cm[/URL]
6. When these numbers are converted to HEX you will get the following : 12360 = 3048, 14002 = 36B2 & 402 = 0192.
7. Now with your remote go to : Menu-->ToH-->Parser-->Ram Editor an press the Radio button.
8. Go on one of the lines which is empty i.e. all zeros an press the "OK" button of your remote.
9. If you have noticed unlike the Biss key the Constant CW key is made up of 32 keys, therefore you will have to use 2 lines instead of 1 line.
10. Before you insert the key you have to shorten the Constant CW key from 32 digits to 24 digits, therefore split the key as follows :
02BAB571D4FCFCCC4C4478081AB5804F
Remove the colored keys i.e. the 4th pair of keys and then the cosecutive 4th pair of keys up to the last keys.
To explain myself better you have to remove always : the 7th/8th key, the 15th/16th key, the 23rd/24th key & the 31st/32nd key.
When you do this exercise you will have the following key : 02BAB5D4FCFC4C44781AB580.
11. Now go on the first empty line, press the "OK" button on your remote and insert the "Frequency" in HEX (3048), the last byte of the "ServID" in HEX (B2), the last byte of the "PMTPID" in HEX (92) and at last the first 12 digits of the Constant CW key you have just worked out.
You should have inserted the following : 3048B29202BAB5D4FCFC
12. Press the "OK" button on your remote to save the key you have just inserted.
13. Go on the second empty line, press the "OK" button on your remote and insert again the "Frequency" in HEX (3048), the last byte of the "ServID" in HEX (B2), the last byte of the "PMTPID" in HEX (92) and at last the second 12 digits of the Constant CW key you had worked out previously.
You should have inserted the following : 3048B2924C44781AB580
14. Press the "OK" button on your remote to save the key you have just inserted.
15. If you have followed all the instructions mentioned above you would have inserted the Constant CW key for *** View Plus, hence you will be able to watch this channel when encrypted with these keys.
N.B. THESE INSTRUCTIONS ARE APPLICABLE FOR THOSE HAVING FIRMWARE VERSION TOH 3.4 HOT v9.4 OR A MORE RECENT VERSION & THE CATONE v3.3 OR A MORE RECENT VERSION
1. Get the Biss key of the channel you want to watch, the Biss keys are always made up of 16 digits, for example : Tv 8 Turkey on Turksat 42oEast (Biss key for Tv 8 Turkey is 1000000000000000).
2. Go on Tv 8 Turkey.
3. Press the ? button on your remote and a window with all the channel details will pop up on your screen.
4. Write down on a piece of paper the "Frequency", the "ServID" & the "PMTPID" of the channel in question, for Tv 8 Turkey the "Frequency" is 11830, the "ServID" is 1 & the "PMTPID" is 32.
5. Use this calculator to convert these numbers from Decimal to HEX : [URL="http://tinyurl.com/mq5cm[/URL]
6. When these numbers are converted to HEX you will get the following : 11830 = 2E36, 1 = 0001 & 32 = 0020.
7. Now with your remote go to : Menu-->ToH-->Parser-->Ram Editor an press the Radio button.
8. Go on one of the lines which is empty i.e. all zeros.
9. Before you insert the key you have to shorten the Biss key from 16 digits to 12 digits, therefore split the key as follows :
1000000000000000
Remove the colored keys i.e. the 4th pair of keys and then the last pair of keys.
To explain myself better you have to remove always : the 7th/8th key & the 15th/16th key.
When you do this exercise you will have the following key : 100000000000.
10. Now Press Ok and insert the "Frequency" in HEX (2E36) then the last byte of the "ServID" in HEX (01), then the last byte of the "PMTPID" in HEX (20) and at last the Biss key. For example for Tv 8 Turkey you should insert the following 20 digit key : 2E360120100000000000.
11. When you have inserted the key as instructed above press "OK" and you would have inserted the Biss key for Tv 8 Turkey, hence you will be able to watch this channel when it is encrypted in Biss.
Constant CW Keys
1. Get the Constant CW key of the channel you want to watch, the Constant CW keys are always made up of 32 digits for example : *** View Plus on Hotbird 13oEast (A recent Constant CW key for *** View Plus was : 02BAB571D4FCFCCC4C4478081AB5804F - N.B. this is an old key therefore it is not active anymore, I am using it only to set an example).
2. Go on *** View Plus.
3. Press the ? button on your remote and a window with all the channel details will pop up on your screen.
4. Write down on a piece of paper the "Frequency", the "ServID" & the "PMTPID" of the channel in question, for *** View Plus the "Frequency" is 12360, the "ServID" is 14002 & the "PMTPID" is 402.
5. Use this calculator to convert these numbers from Decimal to HEX : [URL="http://tinyurl.com/mq5cm[/URL]
6. When these numbers are converted to HEX you will get the following : 12360 = 3048, 14002 = 36B2 & 402 = 0192.
7. Now with your remote go to : Menu-->ToH-->Parser-->Ram Editor an press the Radio button.
8. Go on one of the lines which is empty i.e. all zeros an press the "OK" button of your remote.
9. If you have noticed unlike the Biss key the Constant CW key is made up of 32 keys, therefore you will have to use 2 lines instead of 1 line.
10. Before you insert the key you have to shorten the Constant CW key from 32 digits to 24 digits, therefore split the key as follows :
02BAB571D4FCFCCC4C4478081AB5804F
Remove the colored keys i.e. the 4th pair of keys and then the cosecutive 4th pair of keys up to the last keys.
To explain myself better you have to remove always : the 7th/8th key, the 15th/16th key, the 23rd/24th key & the 31st/32nd key.
When you do this exercise you will have the following key : 02BAB5D4FCFC4C44781AB580.
11. Now go on the first empty line, press the "OK" button on your remote and insert the "Frequency" in HEX (3048), the last byte of the "ServID" in HEX (B2), the last byte of the "PMTPID" in HEX (92) and at last the first 12 digits of the Constant CW key you have just worked out.
You should have inserted the following : 3048B29202BAB5D4FCFC
12. Press the "OK" button on your remote to save the key you have just inserted.
13. Go on the second empty line, press the "OK" button on your remote and insert again the "Frequency" in HEX (3048), the last byte of the "ServID" in HEX (B2), the last byte of the "PMTPID" in HEX (92) and at last the second 12 digits of the Constant CW key you had worked out previously.
You should have inserted the following : 3048B2924C44781AB580
14. Press the "OK" button on your remote to save the key you have just inserted.
15. If you have followed all the instructions mentioned above you would have inserted the Constant CW key for *** View Plus, hence you will be able to watch this channel when encrypted with these keys.
N.B. THESE INSTRUCTIONS ARE APPLICABLE FOR THOSE HAVING FIRMWARE VERSION TOH 3.4 HOT v9.4 OR A MORE RECENT VERSION & THE CATONE v3.3 OR A MORE RECENT VERSION