How to Use ShareMax(HUMAX)

[bliner]

To use ShareMax, follow the following Steps:

1) Unzip the file on a Folder, you should have a SGBox sub-folder.
2) Configure your cwshare.cfg file and put into SGBox folder.
3) On Humax Receiver Set on Menu -- ToH -- Config
-- CAID Preselect to CARD+EMU+S or CARD+S+EMU
-- Card Blocker to ECM+EMM
-- Sharing Protocol to SSSP
4) Connect your PC to your STB with Null Modem Cable
5) Run ShareMax and Configure the Correct COM port.
6) Open the ports used in cwshare files IN/OUT in your Firewall.
7) First time you move to a Srambled Channel, a DOS windows will open(GBox) and connect to your CS...

Note:
=====
-- You cannot Share your CARD in Humax, it is only taking and cannot share your CARD with others at the moment.
-- Example of cwshare.cfg:
M: { ***xx.dyndns.org { 123ABC45 }}
D: { yyyyy.dyndns.org { 1234 2345 { 456XYZ45 { 5 5 }}}}
I: { 09 }
X: { 30 }
N: { 00 01 03 00 4000 6000 }

***xx.dyndns.org your server and 123ABC45 is your password
yyyyy.dyndns.org Share Server, 1234 2345 ports used, 456XYZ45 Server password, 5 5 share level

You can repeat D: line for other Share Servers

Thanks paul_kh