Multiple C lines active

[odysseas1991]

Re: Multiple C lines active

I have also tested this data usage today to see. There is no way that a C line uses more than a few mb when I watched a channel for 30 minutes....Something else is surely using the bandwidth, either an external source or some part of the software on the box is using bandwidth without you knowing. With my tm5402hd its basically just 1 menu screen for the CCCAM and thats it, so I know everything that is going in and out from the box in terms of bandwidth...

[skytec]

Re: Multiple C lines active

before reduce some lines i have bandwith 1gb per day,but now i have only 200-250mb per day with 7 lines

It's so much. I think you're running a background program that is trying to download something from the Internet.

[peremacedonia]

Re: Multiple C lines active

1gb = 1024mb 10h*100mb =1000mb, 24h*100mb =2400mb(2gb)
And what i say when i reduse some peers bandwith come to normal

[yselim]

Re: Multiple C lines active

guys 100mb "per hour" that i mentioned above earlier was only my dreams consumption. i hadnt used my computer, hadnt downloaded something when i saw 100mb perhour consumption. i did this test intentionaly. because i was suspecting from my dream. it was just dreams bandwith usage. i believe 1gb "per day" can be possible since i saw 100mb "per hour". but when i use only one cline bandwith usage is very very low as i stated above.

[zoran89]

Re: Multiple C lines active

before reduce some lines i have bandwith 1gb per day,but now i have only 200-250mb per day with 7 lines

This is not from CS, it just dont take that much of bandwith.

[peremacedonia]

Re: Multiple C lines active

lately i have found that if i put several c lines in config file 500s consumes very high bandwith of internet.(sometimes more than 100mbyte per hour). but if i put one cline, it consumes very very low bandwith.

before reduce some lines i have bandwith 1gb per day,but now i have only 200-250mb per day with 7 lines

Re: Multiple C lines active

yes if you use from several servers and take clines it take high bandwith

Anyway 100 MB is to much, if there are lots of bad / slow clines this can happen,but on good clines it won't reach more then 2-5 MB per hour

[powerman]

Re: Multiple C lines active

yes if you use from several servers and take clines it take high bandwith

[yselim]

Re: Multiple C lines active

The high bandwith consumption is a metter of bad C lines usualy

main factor must be different. i dont know deep knowledge about how cccam works but reason must be the people who use me as a bridge to access another servers cards. and also cardnumbers in the server, encrytion protocol (nds uses frequent request for example) etc must be small factor. that is my guess

Re: Multiple C lines active

lately i have found that if i put several c lines in config file 500s consumes very high bandwith of internet.(sometimes more than 100mbyte per hour). but if i put one cline, it consumes very very low bandwith.

The high bandwith consumption is a metter of bad C lines usualy

[yselim]

Re: Multiple C lines active

lately i have found that if i put several c lines in config file 500s consumes very high bandwith of internet.(sometimes more than 100mbyte per hour). but if i put one cline, it consumes very very low bandwith.

[mathew2323]

Re: Multiple C lines active

You can put the fast server as first one on your cccam.config and add other c-line after that.
This will make the server to connect the first remote server with more priority. I have 6 c-lines from different servers and works great on DM500HD.

[peremacedonia]

Re: Multiple C lines active

hi. I want to ask a bit of a different thing.when I find a free server I put server port on my iexplorer adress line to understand whether server is active or not. that gives me an idea. but how can I understand which user-pass is available. otherwise I try them one by one. Is there an easy way.

you cant.Try to put server many times with diferent usernames and passwords and u will see only one c line in cccam info,so you must test it one by one but free servers dont work many time so is beter to exchange lines with another frends and why u need many cards if u watch only 5-6.Get it from frends.

[os2222]

Re: Multiple C lines active

i can only speak for myself.
every time i have two c-lines in my acamd dvbviewer plugin the time needed to decrypt a certain channel is higher. server 1, e.g. needs longer login times and doesnt have the card encrypring the certain channel (or only has fake cards). with this my plugin first checks the server which is on position one in the list. until all cards are checkt he wouldnt change to server two.
i would recommend you use only one server or you got two "good" servers.

[yselim]

Re: Multiple C lines active

actually some servers have cccam info installed. sometimes I try serveradress 16001 port to reach cccaminfo software of server. and if server has a cccaminfo installed I can see which users are logged in. but unfortunately most free servers dont use standart port number 16001 and we cant gues which port they use