IPRec v4.14

[stufer]

Installation/Update:
1. Copy iprec_4.7_mipsel.ipk to /tmp Verzeichnis der DM7025
2. Make a telnet login
3. ipkg install /tmp/iprec_4.7_mipsel.ipk
5. Then answer the following questions:

Would you like to configure ipRec now [yes] :
Path of the setup file [/media/cf/ipRecSetup.xml] :
Path of the timer file [/media/cf/ipRecTimer.xml] :
Do you want to activate the TVinfo-Service now [yes] :
TVinfo username [homer] :
TVinfo password [***] :
Do you want to activate the TVTV-Service now [yes] :
TVTV username [homer] :
TVTV password [***] :
Set language [uk.co] :

4. reboot
When you install ipRec over the update feed of the OoZooN you can
not answer this questions.
You can do it later with a telnet login and the iprec command.
Write simply iprec <Enter>.
For the Gemini with blue-pannel installation you can make the OoZooN steps,
too.

Deinstallation
1. Make a telnet login
2. ipkg remove iprec
3. reboot

The Channal-Maps
ipRec creates the channelmap themself. If ipRec don't find the right
channel of DM7025, you see an error message during the startup.
Then you must set the channelmap yourself in the ipRec menu of the GUI.
If ipRec makes a fuzzy logical channel assignment, you must make a
viewing check and sometimes a modification.

windows-1250__iprec_4.14.0_mipsel.rar - 0.04MB