Tweet
Requirements:
Dreambox with active network connection
PC with Free space on the Hard Drive
PC must be on the same network or “Segment” as the Dreambox
TrueGrid NFS server files, must use TrueGrid version 1.1 files
NFSDream files, the current version is 1.05
Please, understand that NFSDream is simply a tool to make configuring the TrueGrid NFS server a little more user friendly.
Installation:
Extract the NFSDream file to a folder
Create a new folder within the folder you extracted the NFSDream file to called nfs.
Extract the TrueGrid NFS server files to the folder you created called nfs.
Configuration:
While the NFSDream tool is completely capable of configuring your NFS server, if you read the installation file that comes with the TrueGrid server files, you will see that it can be configured without the aid of NFSDream.
For now, we will focus on using NFSDream to configure the server. Please note that this document is written with the understanding that you will be using Windows NT, Windows 2000 or Windows XP.
It is important to create a folder in your Systemroot directory called etc. Your Systemroot directory is where you have installed your operating system, for example, Windows or Winnt.
You can do this easily by opening a Command (DOS) prompt and typing the following:
cd %systemroot%
md etc
NFSDream will use this folder to copy two files, exports and rpc, later on in the process.
Start the NFSDream application
The first thing to do is install the necessary services on your system. Select “Create” > “Win NT/XP/2K” > “Portmap Add” and “Nfs Add”
Now you can set your recording path. What you are actually doing here is publishing a share on the PC for other machines on the network to access, including the Dreambox. This is also called creating an “Export”.
Select “Create” > “Set record path”, then choose the folder or drive you would like to share.
When you do this, you are telling the NFS server to publish a share called /dreambox which is actually pointing to the folder you selected.
You will also notice there is a new folder within the location you chose called “movie”. This is where all recordings will be stored. Do not delete this folder.
At this point you can actually startup the NFS server and announce the share on the network. Select “Configure” > “Nfs start”.
Don’t worry if you see the message “nfs service is (already) started”. This is normal.
You are ready to tell (or mount) the Dreambox that the share is available.
In the top line box, enter the IP address of your Dreambox (in the field labeled “IP of Dreambox)
In the next line box down, enter the IP address of the machine NFSDream is installed on.
Once both fields have been populated, press the “Mount” button.
What is happening here is that when you press the mount button, NFSDream is actually telnetting into the Dreambox and issuing the following mount command: “mount –t nfs –o nolock local IP:/dreambox /hdd”
Now you are ready to try recording to your NFS share. If you were to FTP into the Dreambox, you would see a folder called /hdd at the root of the filesystem. This folder is actually located on the PC running the NFS server. The folder you see on the Dreambox is actually just a pointer to the shared folder we created using NFSDream.
Re-Shared Post from ihaveadreambox
Dreambox with active network connection
PC with Free space on the Hard Drive
PC must be on the same network or “Segment” as the Dreambox
TrueGrid NFS server files, must use TrueGrid version 1.1 files
NFSDream files, the current version is 1.05
Please, understand that NFSDream is simply a tool to make configuring the TrueGrid NFS server a little more user friendly.
Installation:
Extract the NFSDream file to a folder
Create a new folder within the folder you extracted the NFSDream file to called nfs.
Extract the TrueGrid NFS server files to the folder you created called nfs.
Configuration:
While the NFSDream tool is completely capable of configuring your NFS server, if you read the installation file that comes with the TrueGrid server files, you will see that it can be configured without the aid of NFSDream.
For now, we will focus on using NFSDream to configure the server. Please note that this document is written with the understanding that you will be using Windows NT, Windows 2000 or Windows XP.
It is important to create a folder in your Systemroot directory called etc. Your Systemroot directory is where you have installed your operating system, for example, Windows or Winnt.
You can do this easily by opening a Command (DOS) prompt and typing the following:
cd %systemroot%
md etc
NFSDream will use this folder to copy two files, exports and rpc, later on in the process.
Start the NFSDream application
The first thing to do is install the necessary services on your system. Select “Create” > “Win NT/XP/2K” > “Portmap Add” and “Nfs Add”
Now you can set your recording path. What you are actually doing here is publishing a share on the PC for other machines on the network to access, including the Dreambox. This is also called creating an “Export”.
Select “Create” > “Set record path”, then choose the folder or drive you would like to share.
When you do this, you are telling the NFS server to publish a share called /dreambox which is actually pointing to the folder you selected.
You will also notice there is a new folder within the location you chose called “movie”. This is where all recordings will be stored. Do not delete this folder.
At this point you can actually startup the NFS server and announce the share on the network. Select “Configure” > “Nfs start”.
Don’t worry if you see the message “nfs service is (already) started”. This is normal.
You are ready to tell (or mount) the Dreambox that the share is available.
In the top line box, enter the IP address of your Dreambox (in the field labeled “IP of Dreambox)
In the next line box down, enter the IP address of the machine NFSDream is installed on.
Once both fields have been populated, press the “Mount” button.
What is happening here is that when you press the mount button, NFSDream is actually telnetting into the Dreambox and issuing the following mount command: “mount –t nfs –o nolock local IP:/dreambox /hdd”
Now you are ready to try recording to your NFS share. If you were to FTP into the Dreambox, you would see a folder called /hdd at the root of the filesystem. This folder is actually located on the PC running the NFS server. The folder you see on the Dreambox is actually just a pointer to the shared folder we created using NFSDream.
Re-Shared Post from ihaveadreambox