correct setting for the tuner lnb scr?

[Mobley3]

Re: correct setting for the tuner lnb scr?

Hi there,
I'm looking to put my DM into SCR mode and was trying to download your file but it just goes to a blank page. Is there any chance you could help with this.

Thank You

Maybe that is because it is a 3 Year old post, M8. this is a constantly changing
technology.

regards mobley3

[deanobeano123]

Re: correct setting for the tuner lnb scr?

In this zip you attached is the instruction manual cited lnb

Hi there,
I'm looking to put my DM into SCR mode and was trying to download your file but it just goes to a blank page. Is there any chance you could help with this.

Thank You

[mahrkpat]

Re: correct setting for the tuner lnb scr?

I ran the setup but unfortunately I "Sync failed" and the decoder Mysk * hangs

It seems the problem is your Mysk is it compatible?
Try testing one device at a time to confirm if Mysk still hangs then that is the
problem.

Just another thought are you supposed to use diseqc switch or just ordinary
signal splitter.

[valrug]

Re: correct setting for the tuner lnb scr?

I ran the setup but unfortunately I "Sync failed" and the decoder Mysk * hangs

[mahrkpat]

Re: correct setting for the tuner lnb scr?

O.k from reading the download from joseram2000 you need to get into the
service menu of each device and select scr mode then you have to make sure
to set channel 1 to band 11 you do this for each device, save your settings and
wait 120s to allow set up to finalise have you done this?
Please note channel 1 band 11 for both devices.

[valrug]

Re: correct setting for the tuner lnb scr?

May I ask why you want to use lnb scr ?
From your set up you only have 2 devices so why not one cable to mysk and one
to dm using a universal twin lnb getting rid of the diseqc switch would it not simplify
things?

you simplify
the problem is to bring another cable to the dish
but avendoi tried all the settings I know that I have to provide for strength

[mahrkpat]

Re: correct setting for the tuner lnb scr?

May I ask why you want to use lnb scr ?
From your set up you only have 2 devices so why not one cable to mysk and one
to dm using a universal twin lnb getting rid of the diseqc switch would it not simplify
things?

[valrug]

Re: correct setting for the tuner lnb scr?

the system scheme is this
I do not have a second cable

[joseram2000]

Re: correct setting for the tuner lnb scr?

In this zip you attached is the instruction manual cited lnb

[valrug]

Re: correct setting for the tuner lnb scr?

the system scheme is this
- Dish with lnb scr
- 1 diseqc 3 outputs
- * Decoder mysk using outputs 1 and 2 lnb
- Dm800hd of other jack with output setting scr 3

[rizwan]

Re: correct setting for the tuner lnb scr?

Do you have any disec or more than one dish connected with your Box ?

[valrug]

what is the correct setting for the tuner lnb scr?
I tried various settings but even when I turn the decoder mysk * I tune the message failed

dm800 hd clone nemesis 2.6