DM 500-s. (Network Setup is not Ok )

[kalpikos]

Re: DM 500-s. (Network Setup is not Ok )

I flached a dm500 with dcc and an Actual openpli without Problems over LAN.

My friend,
I suggest you do not use your lan to flash your box.
Use only DreamUp with a null modem cable.
Your receiver can be stuck very very badly and it's very difficult to fix it.

[Subo]

Re: DM 500-s. (Network Setup is not Ok )

I flached a dm500 with dcc and an Actual openpli without Problems over LAN.

[thews34]

Re: DM 500-s. (Network Setup is not Ok )

papatzis6

Once you have flashed the box using dreamup you should then be able to check for a sat signal where your dish is pointing. Why not try to establish fta channels first.

[easydigital]

Re: DM 500-s. (Network Setup is not Ok )

Have you tryed to do a network test inside the operating system to see if everything's working okay...olsir?

[kalpikos]

Re: DM 500-s. (Network Setup is not Ok )

ok i trie.i give my dm500 to put on them line cccam to see some channel free.when i try to change the line in config file i can see any file in my dm then i try to flash my dm with dreamup and give me this message "found no valid jffs2 in image, flash erase not supported" continue to flash "booting from its memory" and in the end "flash succesful" then i try to put new line cccam but i cant see many channels from some providers.i put the same line in other dm and working perfect.i thing that something change in the first dm and i dont know what if someone knows how can i brink the dm in first possision please help thanks

Dear
I wrote a message for you, but I think that you didn't see it

This "found no valid jffs2 in image, flash erase not supported"
is because you try to flash your box with a new version of dreamup.

As I said, the older versions of dreamup have problems with dm 500s.

Try to find an old version, I suggest you the v1.2.2.0

When you finish with flashing, you have to upload to your box a ready list of channels, as Vhannibal settings.
Choise which satellites you have and upload the appropriate file.

Then, you have to download cccam in your box, to make it works as your default cam, and create cccam.cfg in var/etc.
There you have to put your new line.
Enjoy!!!

[Jerry2020]

Re: DM 500-s. (Network Setup is not Ok )

yes i install every time.i try an other dm who take the cline from the same "friend" and do the same thing

If you mean you are trying the same cline on two boxes, it won't work properly. One cline can't be shared between more than one user. You have to get a new one for the other box.

[papatzis6]

Re: DM 500-s. (Network Setup is not Ok )

yes i install every time.i try an other dm who take the cline from the same "friend" and do the same thing

[Jerry2020]

Re: DM 500-s. (Network Setup is not Ok )

i try many image but nothing hapen .when the channel change position and i do rescan i still not found.can someone change some files in dm so only he can put line and make me go again on the same "friend" to put the cline.my cline is not free

Each time you install an image, you have to add the cccam.cfg file.

[papatzis6]

Re: DM 500-s. (Network Setup is not Ok )

i try many image but nothing hapen .when the channel change position and i do rescan i still not found.can someone change some files in dm so only he can put line and make me go again on the same "friend" to put the cline.my cline is not free

[kostis]

Re: DM 500-s. (Network Setup is not Ok )

ok i trie.i give my dm500 to put on them line cccam to see some channel free.when i try to change the line in config file i can see any file in my dm then i try to flash my dm with dreamup and give me this message "found no valid jffs2 in image, flash erase not supported" continue to flash "booting from its memory" and in the end "flash succesful" then i try to put new line cccam but i cant see many channels from some providers.i put the same line in other dm and working perfect.i thing that something change in the first dm and i dont know what if someone knows how can i brink the dm in first possision please help thanks

i think that if you had a "gift" but you flash your dm500 it will not come back. as for the channels from some providers you mean it will not open them or you cant see the list? if its the second a rescan would not do any warm as some of them change position. is your cline a free one what image to you have now?

[papatzis6]

Re: DM 500-s. (Network Setup is not Ok )

ok i trie.i give my dm500 to put on them line cccam to see some channel free.when i try to change the line in config file i can see any file in my dm then i try to flash my dm with dreamup and give me this message "found no valid jffs2 in image, flash erase not supported" continue to flash "booting from its memory" and in the end "flash succesful" then i try to put new line cccam but i cant see many channels from some providers.i put the same line in other dm and working perfect.i thing that something change in the first dm and i dont know what if someone knows how can i brink the dm in first possision please help thanks

[kalpikos]

Re: DM 500-s. (Network Setup is not Ok )

i have a promplem with my dm 500 i buy dm500 with Subscriptions but now i like to change the line in config but i cant have all the chanels from the new Subscription.i put the line in the other dm 500 i have and its working perfect.i thing is something locked from my first buy and Subscription because when i flash with dreamup white "found no valid jffs2 in image, flash erase not supported" and letter something like "booting from memory box" if someone help me how to do thanks

Try the oldest version of Dreamup you can find and flash your box.
Do a search for DreamUP v1.2.2.0
The newer versions of DreamUP have many problems with dm500s.

[Jerry2020]

Re: DM 500-s. (Network Setup is not Ok )

i have a promplem with my dm 500 i buy dm500 with Subscriptions but now i like to change the line in config but i cant have all the chanels from the new Subscription.i put the line in the other dm 500 i have and its working perfect.i thing is something locked from my first buy and Subscription because when i flash with dreamup white "found no valid jffs2 in image, flash erase not supported" and letter something like "booting from memory box" if someone help me how to do thanks

I don't think your question is clear enough. Try to be clearer so we can help you.

[papatzis6]

Re: DM 500-s. (Network Setup is not Ok )

i have a promplem with my dm 500 i buy dm500 with Subscriptions but now i like to change the line in config but i cant have all the chanels from the new Subscription.i put the line in the other dm 500 i have and its working perfect.i thing is something locked from my first buy and Subscription because when i flash with dreamup white "found no valid jffs2 in image, flash erase not supported" and letter something like "booting from memory box" if someone help me how to do thanks

[gianni253]

Re: DM 500-s. (Network Setup is not Ok )

i just try it and yes it can download addons, but still the satlover clines doesnt work not even for a second. fta channels are ok, maybe its another problem.

Or you could try to connect to a server with a dedicated cline for you, just to be sure it's not a server problem