Welcome!

Welcome to Satlover forums, full of great people, ideas and excitement.

Please register if you would like to take part. link..

Register Now

Alert: Don't Use Hotmail Email Accounts for registration

Collapse

Before Access to all Forums and Trial accounts you must need to activate your account Email address

How to install ,and configure Drtic in DB 500S

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Gladiatorius
    replied
    Re: How to install ,and configure Drtic in DB 500S

    Originally posted by dac12
    Hi Gladiatorius. I use to have problems installing drtic om my DM500S too. Finaly I call to my frend who has sucessfully instaled drtic to his DM500S and copy file by file in right directorries from his DM to mine. U can guess the result....
    My friend you can tell me how i can doo?/
    Thanks for your answer

    Leave a comment:


  • dac12
    replied
    Re: How to install ,and configure Drtic in DB 500S

    Hi Gladiatorius. I use to have problems installing drtic om my DM500S too. Finaly I call to my frend who has sucessfully instaled drtic to his DM500S and copy file by file in right directorries from his DM to mine. U can guess the result....

    Leave a comment:


  • Gladiatorius
    replied
    Re: How to install ,and configure Drtic in DB 500S

    Originally posted by vimmers
    it can depend on what image you have installed
    Nabilo DM 500 v,0.8 MAX VAR

    Originally posted by peremacedonia
    You need only install, install.ppc, dm56xx.dsk files,its work i was using this some times
    Yes my Friend ,i do this but is not work, if you can tell me how can do this to work, how to use?
    Thanks

    Leave a comment:


  • peremacedonia
    replied
    Re: How to install ,and configure Drtic in DB 500S

    You need only install, install.ppc, dm56xx.dsk files,its work i was using this some times

    Leave a comment:


  • vimmers
    replied
    Re: How to install ,and configure Drtic in DB 500S

    it can depend on what image you have installed

    Leave a comment:


  • Gladiatorius
    replied
    Re: How to install ,and configure Drtic in DB 500S

    heave not something for DB 500s ?
    Because there writing for 500 ,but in my db don't work

    Leave a comment:


  • gauloises1
    replied
    Re: How to install ,and configure Drtic in DB 500S

    i have a dm800se clone too and i am satisfied,dm500s don't have anymore so much suport

    Leave a comment:


  • Gladiatorius
    replied
    Re: How to install ,and configure Drtic in DB 500S

    My Friend i was downloading from there but there has not something for DB 500s, what to downloading for my DB500s?

    Leave a comment:


  • peremacedonia
    replied
    Re: How to install ,and configure Drtic in DB 500S

    Here installation manually in 3 steps:
    Step 1:
    Download it from the Drtic web site http******xx://czdream.wz.cz/
    Step 2:
    With your favorite client FTP, just put the files install, install.ppc, in the temporary directory
    /tmp on your Dreambox.
    Step 3:
    With your favorite TELNET utility, connect to the Dreambox (normally with
    root/dreambox in most images), go to the /tmp folder (type cd /tmp) and start the
    installer with the following command: /tmp/install
    (Be sure to read point space slash tmp slash install) like this:
    root@dreambox /tmp > . /tmp/install
    The installer is launched and displays something like this:
    Welcome to Drtic v1.9-pre5 for DM7000 -- installer v0.20
    More info is available at http******x://czdream.wz.cz/
    FreeType library 2.0.0
    Drtic 1.9-pre5 for FreeType 2.0 will be installed.
    Select language version:
    a - Czech
    b - English
    c - Arabic
    d - Dutch
    e - French
    f - Greek
    g - Hungarian
    h - Polish
    i - Slovenian
    Your choice:
    Type for example a to select Czech language, b for English language and so on
    Let’s choose the French language for example with the e choice
    Then Drtic installer displays:
    Select subtitles directory:
    0 - I'm upgrading or I'll do it manually -- don't care...
    1 - Flash
    2 - /tmp
    3 - HDD -> /hdd/local/tit
    Your choice:
    This is an important choice. This is where the subtitles will reside. You have the choice
    to say in flash, in /tmp or in a dedicated folder of your hard drive.
    Let’s say you choose: 3
    Then the installer displays:
    Select your favorite font:
    (The preferred one is md_khmurabi_10.ttf)
    0 - I'm upgrading or I'll do it manually -- don't care...
    a - bluebold.ttf
    b - bluehigh.ttf
    c - md_khmurabi_10.ttf
    d - pakenham.ttf
    Your choice:
    Let’s choose the preferred font with the c choice
    The Drtic installer then summarizes your choices displaying:
    Configuration:
    Install Drtic 1.9-pre5 (DM7000) for FreeType2 v2.0 - French
    [French translation by pingu (http***xx://portail.dreamcorporation.com)]
    Store subtitles in /hdd/local/tit
    My favourite font is /share/fonts/md_khmurabi_10.ttf
    Are you sure? [Yes/No/Exit]
    At this step answering Y for YES starts the Drtic installation with the above configuration.
    N for No restarts the installer to let you review and change your choices. E exits.
    After the installation the following is displayed:
    Installation:
    OK
    Linking dir /var/tit => /hdd/local/tit
    Selected font: '/share/fonts/md_khmurabi_10.ttf'
    Done.
    Please read the documentation and FAQs at http***xx://czdream.wz.cz/
    To verify everything is ready for Drtic, issue the following command from your existing
    telnet session:
    To verify that the symbolic link has been successfully defined, enter the following
    command: cd /var/tit
    You should be changed to subdirectory /hdd/local/tit like this:
    root@dreambox /tmp > cd /var/tit
    root@dreambox /hdd/local/tit >
    If it is not the case you have to know that the installation program searches your hard
    disk (hdd) for local directory. If it doesn't exist, the "subtitles on HDD" option isn't
    available. You can create the directory before you start Drtic's installation or change
    subtitles location manually:
    · Login to your Dreambox.
    · Create local directory before Drtic's installation:
    mkdir /mnt/hdd/local
    · Replace /mnt/hdd with your path to HDD. You can create the directory with any
    FTP client if you don't like command line.
    · Change subtitles storage manually:
    Remove /var/tit directory or link:
    rm /var/tit
    If you get rm: /var/tit: is a directory message, then use following command:
    rm -rf /var/tit
    · Create new directory for subtitles:
    mkdir /mnt/hdd/local
    mkdir /mnt/hdd/local/tit
    · and the link to it:
    ln -sf /mnt/hdd/local/tit /var/tit
    Replace /mnt/hdd with path to your hdd.

    Leave a comment:


  • Gladiatorius
    replied
    Re: How to install ,and configure Drtic in DB 500S

    Originally posted by gauloises1
    now i think you want TOO MUCH from old 500s.in my oppinion you have to sell it and buy 500 hd or 800/800se
    hmmm. with 800 se is easy ??
    if with 800se its easy, i go to bay one but no original (its so expensive) but clone,with clone i can doo this,or not??
    Thank you

    Leave a comment:


  • gauloises1
    replied
    Re: How to install ,and configure Drtic in DB 500S

    now i think you want TOO MUCH from old 500s.in my oppinion you have to sell it and buy 500 hd or 800/800se

    Leave a comment:


  • How to install ,and configure Drtic in DB 500S

    Hello to all,
    I want to install Drtic in my Dreambox 500s(clone) but i don't know how, if someone here know let's HELP ME
    this is a program to see any movie in dreambox with subtittles And if exist another program to do this , please tell me
    THANK YOU
Working...