Moving motor ...

[vecchia_signora]

Re: Moving motor ...

what do you mean with dreambox menu not image menu?

[topman96]

Re: Moving motor ...

in my dreambox 800 clone i am sure ther is a setting in the menu of the dreambox to show icon whens its moveing mine shows flashing sat icon and that setting is in dreambox menu not image menu

[nush]

Re: Moving motor ...

hi vecchia
i have the same problem with gemini 5.1, when it first happened i thought something major was wrong with the box so it annoyed me, now i know what is happening i just ignore it, i will be changing image soon anyway so for me its not worth any trouble
nush

[vimmers]

Re: Moving motor ...

menu/information/info
and to see the motor move
menu/setup/system/customize/show positioner movement (yes)

[vecchia_signora]

Re: Moving motor ...

its the gemini project II image .. how can i know what version i have ?

[naiarty]

Re: Moving motor ...

_wich is the latest image from Gemini team an is pos_sible to upgrade to ssl 82 in one dreambox 800 with sim 2.01 ?

[alfred_1]

Re: Moving motor ...

hi i checked what you told me and its already set like that .. maybe its an image problem!!?

Exactly what Gemini Image do you have 4.50....4.70....5.1..?

Ha inkelmek bil Malti jien qatt ma kelli 'Clone' ghalura ma nafx il Images taghhom ezatti kif inhuma, biss nahseb jien l-istess....ghalkemm irridu ikunu 'patched'.

[vecchia_signora]

Re: Moving motor ...

Most probably the Image you have is different.....Try This.....

Menu>Setup>System> Customize> ('Setup Mode' make it 'EXPERT' with Remote Buttons {><}) go down to ''Show Positioner Movement'' and turn it to Yes'
Pres 'Ok' and exit all the way out.

hi i checked what you told me and its already set like that .. maybe its an image problem!!?

[alfred_1]

Re: Moving motor ...

instead of power management i have written Tone Amplitude! .. all other settings are fine

Most probably the Image you have is different.....Try This.....

Menu>Setup>System> Customize> ('Setup Mode' make it 'EXPERT' with Remote Buttons {><}) go down to ''Show Positioner Movement'' and turn it to Yes'
Pres 'Ok' and exit all the way out.

[vecchia_signora]

Re: Moving motor ...

instead of power management i have written Tone Amplitude! .. all other settings are fine

[alfred_1]

Re: Moving motor ...

my settings are fine and the motor moves corretly .. my problem is that on my db500 it used to display on screen a message stating that the motor is moving .. however now on my db800 it does not state that when moving .. it just displays an error message tuner failed and then when the motor arrives at the position it opens up the channel ok ..

Look you have to find these settings in this order:

1} for usals
2) for stored Satellites

I am enclosing these Screen Shots. which also are in that order. The last Screen shot is part of the second.

[vecchia_signora]

Re: Moving motor ...

my settings are fine and the motor moves corretly .. my problem is that on my db500 it used to display on screen a message stating that the motor is moving .. however now on my db800 it does not state that when moving .. it just displays an error message tuner failed and then when the motor arrives at the position it opens up the channel ok ..

[hajdari2008]

Re: Moving motor ...

I will try to help you.

1. you must have rotor settings
2.take your dm remote and do this...

menu>set up>service searching>tuner configuration>ok

now if your rotor suports usuals you can set configuration to simple and Mode to positioner then you have to put your longitude and latitude (of your dish) this you will find on ****** search ,just type "dishpointer"

i hope this was useful to you

[alfred_1]

Re: Moving motor ...

i did not undersand exactly mate ? as when i go in configuration mode i dont get the option you said

What are you using....Usals system.....Positioner.?

[vecchia_signora]

Re: Moving motor ...

Now I understood what you meant...then do as Digicon said, that is to say, go to Menu >Setup>service searching>Tuner Configuration>Tuner>Configuration Mode>go right down to ''Use Power Management'' and turn it to 'No'

i did not undersand exactly mate ? as when i go in configuration mode i dont get the option you said