Tweet
MythTV 0.23.1
MythTV description
MythTV is a homebrew PVR project.
MythTV project is a suite of programs that allow you to build the mythical home media convergence box on your own using Open Source software and operating systems.
MythTV is a project aiming to create a homebrew set-top box. The end goal is to have a nice interface for watching TV, recording shows, listening to music, etc., all displayed on a TV and controlled by a remote.
Here are some key features of "MythTV":
· Basic 'live-tv' functionality. Pause/Fast Forward/Rewind "live" TV.
· Support for multiple tuner cards and multiple simultaneous recordings.
· Distributed architecture allowing multiple recording machines and multiple playback machines on the same network, completely transparent to the user.
· Compresses video in software using rtjpeg (from Nuppelvideo) or mpeg4 (from libavcodec). Full support for Hardware MPEG-2 encoder cards (Hauppauge PVR-250 / PVR-350). Preliminary support for DVB cards and the new pcHDTV tuner card.
· Support for the (very nice looking) hardware MPEG-2 decoder and TV out present on the Hauppauge PVR-350.
· Completely automatic commercial detection/skipping
· Grabs program information using xmltv.
· A fully themeable menu to tie it all together.
The television portion allows you to do the following:
· You may pause, fast-forward and rewind live Television.
· You may install multiple video capture cards to record more than one program at a time.
· You can have multiple servers, each with multiple capture cards in them. All servers are centrally managed and all programs are scheduled by the Master backend.
· You can have multiple clients (called "frontends" in MythTV parlance), each with a common view of all available programs. Any client can watch any program that was recorded by any of the servers. Clients can be diskless and controlled entirely by a remote control.
· You may use any combination of standard analog capture card, MPEG-2, MJPEG, DVB or HDTV capture devices. With appropriate hardware, MythTV can control set top boxes, often found in digital cable and satellite TV systems.
· Program Guide Data in North America is downloaded from Zap2It.com, a subsidiary of Tribune Media Services. This free service is called DataDirect, and provides MythTV almost two weeks of scheduling information. Program Guide Data in other countries is obtained using XMLTV. MythTV uses this information to create a schedule that maximizes the number of programs that can be recorded if you don't have enough tuners.
Other modules in MythTV include:
· MythGallery, a picture-viewing application
· MythVideo, a media-viewer for content not created within MythTV
· MythDVD, a DVD viewer / ripper
· MythMusic, a music playing / ripping application which supports MP3 and FLAC
· MythGame
· MythWeather
· MythNews, a RSS news grabber
· MythBrowser, a web browser
· MythWeb, which allows you to control your MythTV system using a web browser. With MythWeb, you can schedule recordings, delete files, change keybindings and more. With proper security, you may even schedule a program over the Internet and have it immediately acted on by the scheduler.
· MythPhone, phone and videophone using SIP.
What's New in This Release:
· New release! It's been quite a while, so there's lots of new stuff. Notably: autodiscovery (less manual configuration of new frontends), storage groups (no need for LVM/etc), support for multiple recordings on one DVB/ATSC multiplex, a couple new plugins, some new deinterlacing/video display options, and many, many other things.
What's New in This Release: [ read full changelog ]
· A recent bugfix required that we upgrade the version of the communication protocol used between the various MythTV components. In order to allow users to keep track of this change, we are pleased to announce that 0.23.1 has been released, which includes the aforemented bug fix along with many others.
Screenshots
DOWNLOAD
MythTV description
MythTV is a homebrew PVR project.
MythTV project is a suite of programs that allow you to build the mythical home media convergence box on your own using Open Source software and operating systems.
MythTV is a project aiming to create a homebrew set-top box. The end goal is to have a nice interface for watching TV, recording shows, listening to music, etc., all displayed on a TV and controlled by a remote.
Here are some key features of "MythTV":
· Basic 'live-tv' functionality. Pause/Fast Forward/Rewind "live" TV.
· Support for multiple tuner cards and multiple simultaneous recordings.
· Distributed architecture allowing multiple recording machines and multiple playback machines on the same network, completely transparent to the user.
· Compresses video in software using rtjpeg (from Nuppelvideo) or mpeg4 (from libavcodec). Full support for Hardware MPEG-2 encoder cards (Hauppauge PVR-250 / PVR-350). Preliminary support for DVB cards and the new pcHDTV tuner card.
· Support for the (very nice looking) hardware MPEG-2 decoder and TV out present on the Hauppauge PVR-350.
· Completely automatic commercial detection/skipping
· Grabs program information using xmltv.
· A fully themeable menu to tie it all together.
The television portion allows you to do the following:
· You may pause, fast-forward and rewind live Television.
· You may install multiple video capture cards to record more than one program at a time.
· You can have multiple servers, each with multiple capture cards in them. All servers are centrally managed and all programs are scheduled by the Master backend.
· You can have multiple clients (called "frontends" in MythTV parlance), each with a common view of all available programs. Any client can watch any program that was recorded by any of the servers. Clients can be diskless and controlled entirely by a remote control.
· You may use any combination of standard analog capture card, MPEG-2, MJPEG, DVB or HDTV capture devices. With appropriate hardware, MythTV can control set top boxes, often found in digital cable and satellite TV systems.
· Program Guide Data in North America is downloaded from Zap2It.com, a subsidiary of Tribune Media Services. This free service is called DataDirect, and provides MythTV almost two weeks of scheduling information. Program Guide Data in other countries is obtained using XMLTV. MythTV uses this information to create a schedule that maximizes the number of programs that can be recorded if you don't have enough tuners.
Other modules in MythTV include:
· MythGallery, a picture-viewing application
· MythVideo, a media-viewer for content not created within MythTV
· MythDVD, a DVD viewer / ripper
· MythMusic, a music playing / ripping application which supports MP3 and FLAC
· MythGame
· MythWeather
· MythNews, a RSS news grabber
· MythBrowser, a web browser
· MythWeb, which allows you to control your MythTV system using a web browser. With MythWeb, you can schedule recordings, delete files, change keybindings and more. With proper security, you may even schedule a program over the Internet and have it immediately acted on by the scheduler.
· MythPhone, phone and videophone using SIP.
What's New in This Release:
· New release! It's been quite a while, so there's lots of new stuff. Notably: autodiscovery (less manual configuration of new frontends), storage groups (no need for LVM/etc), support for multiple recordings on one DVB/ATSC multiplex, a couple new plugins, some new deinterlacing/video display options, and many, many other things.
What's New in This Release: [ read full changelog ]
· A recent bugfix required that we upgrade the version of the communication protocol used between the various MythTV components. In order to allow users to keep track of this change, we are pleased to announce that 0.23.1 has been released, which includes the aforemented bug fix along with many others.
Screenshots
DOWNLOAD
