Block all cards that you don’t want

[peremacedonia]

First of all I want to say that using the method below will block all cards that you don’t choose to receive.
This also means that you will only share the cards that you decide to receive.
Remember that your peers might want cards that you don’t receive because you blocked them, and therefore they can see you as a not so interesting peer.
After every Cline you’ll add:
no { 0:0:1 } This means that you take all cards on hop1.
If you want any card on hop2 you’ll add:
no { 0:0:1, 90f:0:2, b00:0:2, anycard, anycard, anycard }
In this example I chose to get
90f:0 = “Viasat (5E/75E/1W)” on hop2
b00:0 = “Focus(1W) / C+Nordic(1W) / DigiAlb(16E) / MTV(19.2E)” on hop2
The last number is hop:
90f:0:2

[uttnls]

Re: Block all cards that you don’t want

First of all I want to say that using the method below will block all cards that you don’t choose to receive.
This also means that you will only share the cards that you decide to receive.
Remember that your peers might want cards that you don’t receive because you blocked them, and therefore they can see you as a not so interesting peer.
After every Cline you’ll add:
no { 0:0:1 } This means that you take all cards on hop1.
If you want any card on hop2 you’ll add:
no { 0:0:1, 90f:0:2, b00:0:2, anycard, anycard, anycard }
In this example I chose to get
90f:0 = “Viasat (5E/75E/1W)” on hop2
b00:0 = “Focus(1W) / C+Nordic(1W) / DigiAlb(16E) / MTV(19.2E)” on hop2
The last number is hop:
90f:0:2

The third parameter is not realy the hop, is uphop

For example if you have

no { 0:0:3, 90f:0:2, b00:0:2}

you recive cards from hop1 and hop2 for 90f and b00

in you example you restricted all cards to hop1 and allowed cards 90f and b00 from hop2, so if you change 0:0:1 to 0:0:3 things change so remember is uphop not hop

[peremacedonia]

Re: Block all cards that you don’t want

The third parameter is not realy the hop, is uphop

For example if you have

no { 0:0:3, 90f:0:2, b00:0:2}

you recive cards from hop1 and hop2 for 90f and b00

in you example you restricted all cards to hop1 and allowed cards 90f and b00 from hop2, so if you change 0:0:1 to 0:0:3 things change so remember is uphop not hop

Yes u are right its no reason to block cards on hop2 if they already blocked
{ 0:0:1 } ,but if we alowed to hop3 { 0:0:3 } its another thing

[uttnls]

Re: Block all cards that you don’t want

Yes u are right its no reason to block cards on hop2 if they already blocked
{ 0:0:1 } ,but if we alowed to hop3 { 0:0:3 } its another thing

In your configuration the cards are not blocked they are allowed.

The ideea is that with 0:0:1 you block all to hop1, and with 90f:0:2 you allow cards from hop2 for 90f.

Thats the main ideea the third parameter is only for uphop it is not used as general allow / block.

By using it you can obtain an blocking or allowing behavior function of first general rule 0:0:1 or 0:0:2 or 0:0:3 or whatever

[vimmers]

Re: Block all cards that you don’t want

i am not sure i understand this i have added no { 0:0:3, 90f:0:1, b00:0:1} to the end of
my clines cos i am danish
i got vip and server 2 clines
but i still receive cards from hops 3 on both 90f and b00

[uttnls]

Re: Block all cards that you don’t want

i am not sure i understand this i have added no { 0:0:3, 90f:0:1, b00:0:1} to the end of
my clines cos i am danish
i got vip and server 2 clines
but i still receive cards from hops 3 on both 90f and b00

And you added this at the end off all your c lines ? If not that's why !

[vimmers]

Re: Block all cards that you don’t want

And you added this at the end off all your c lines ? If not that's why !

yes i did that

[uttnls]

Re: Block all cards that you don’t want

yes i did that

For testing only try like this :

{ 0:0:0, 90f:0:1, b00:0:1}

It should give you only those two providers and maximum from hop1

Bytheway do you have those providers in hop1 ?

[vimmers]

Re: Block all cards that you don’t want

i will try
and yes they are in hop 1

[peremacedonia]

Re: Block all cards that you don’t want

I dont use hadu plugin so i dont know anyting about it

[vimmers]

Re: Block all cards that you don’t want

is it possible to block only 1 specific card
lets say the card are in hop2 there are 3 in hop 1. 8 in hop 2. 10 in hop 3
can i then block a card in hop 2 so there are only 7 in hop 2

[peremacedonia]

Re: Block all cards that you don’t want

is it possible to block only 1 specific card
lets say the card are in hop2 there are 3 in hop 1. 8 in hop 2. 10 in hop 3
can i then block a card in hop 2 so there are only 7 in hop 2

no { 0 0 3 cardid:2, }

[vimmers]

Re: Block all cards that you don’t want

what i can see u block all hop 2 cards
i dont want that
i wanna block a specific in hop 2 not not all in hop 2
let say this 3 cards are in hop 2
NodeID : 5b9f1a2a16d1661b_67
NodeID : 5b9f1a2a16d1661b_526a3
NodeID : dceabcaae38cb8a4_1179ae
they are all b00 conax nordic
can i block the card in red

[njb]

Re: Block all cards that you don’t want

Usuly I don't want to block anything in Cline.
I 'll probably want more rights.

By the way, would it be possible to reshare a card I receive in hop1 but with no reshare rights due to the limit extention in the Server Fline ?
As for exemple if I use oscam in the client box ...

NjB

[vimmers]

Re: Block all cards that you don’t want

what i can see u block all hop 2 cards
i dont want that
i wanna block a specific in hop 2 not not all in hop 2
let say this 3 cards are in hop 2
NodeID : 5b9f1a2a16d1661b_67
NodeID : 5b9f1a2a16d1661b_526a3
NodeID : dceabcaae38cb8a4_1179ae
they are all b00 conax nordic
can i block the card in red

any answer to this ?

NjB

Usuly I don't want to block anything in Cline.
I 'll probably want more rights.

By the way, would it be possible to reshare a card I receive in hop1 but with no reshare rights due to the limit extention in the Server Fline ?
As for exemple if I use oscam in the client box ...

be warned 1 member are just banned from server 2 for reshare